IPAC2018 - List of Authors (Uehara, S.)

Paper	Title	Page
WEPAL037	Simulation Study on Luminosity Feedback for Horizontal Beam Stabilization at Superkekb	2250
	C.G. Pang, P. Bambade LAL, Orsay, France Y. Funakoshi, S. Uehara KEK, Ibaraki, Japan
	The SuperKEKB e⁺ e^- collider uses highly focused ultra-low emittance bunches colliding every 4 ns to reach a very high luminosity of 8× 10³⁵ cm^-2s^-1. It is quite essential to have an orbit feedback system at the Interaction Point (IP) to maintain the optimum overlap between the colliding beams in the presence of ground motion disturbances. For the horizontal motion, a luminosity monitoring system, based on measuring the rate of the Bhabha process at vanishing scattering angle, is developed as input signal to the feedback system. The relative precision needed for this monitor is studied in detail, for the different successive stages of luminosity operation, based on a full simulation of this system, including the detector, DAQ, lock-in amplifier, and feedback control.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAL037
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAL038	First Tests of Superkekb Fast Luminosity Monitors During 2018 Phase-2 Commissioning	2254
	C.G. Pang, P. Bambade, S. Di Carlo, D. Jehanno, V. Kubytskyi, Y. Peinaud, C. Rimbault LAL, Orsay, France Y. Funakoshi, S. Uehara KEK, Ibaraki, Japan
	The SuperKEKB e⁺e^- collider aims to reach a very high luminosity of 8× 10³⁵ cm^-2s^-1, by using highly focused ultra-low emittance bunches colliding every 4 ns, it is essential to have an orbit feedback system at the Interaction Point (IP) to maintain the optimum overlap between two colliding beams. Luminosity monitoring systems including LumiBelle2 and ZDLM as input to dithering feedback system used to stabilize the horizontal orbit at the IP were developed and will be described, including the detectors, mechanical set-up, DAQ. Preliminary measurements and analysis of background and first stage luminosity monitoring data collected will be reported and compared with simulation.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAL038
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Simulation Study on Luminosity Feedback for Horizontal Beam Stabilization at Superkekb

2250

C.G. Pang, P. Bambade
LAL, Orsay, France
Y. Funakoshi, S. Uehara
KEK, Ibaraki, Japan

The SuperKEKB e⁺ e^- collider uses highly focused ultra-low emittance bunches colliding every 4 ns to reach a very high luminosity of 8× 10³⁵ cm^-2s^-1. It is quite essential to have an orbit feedback system at the Interaction Point (IP) to maintain the optimum overlap between the colliding beams in the presence of ground motion disturbances. For the horizontal motion, a luminosity monitoring system, based on measuring the rate of the Bhabha process at vanishing scattering angle, is developed as input signal to the feedback system. The relative precision needed for this monitor is studied in detail, for the different successive stages of luminosity operation, based on a full simulation of this system, including the detector, DAQ, lock-in amplifier, and feedback control.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAL037

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAL038

First Tests of Superkekb Fast Luminosity Monitors During 2018 Phase-2 Commissioning

2254

C.G. Pang, P. Bambade, S. Di Carlo, D. Jehanno, V. Kubytskyi, Y. Peinaud, C. Rimbault
LAL, Orsay, France
Y. Funakoshi, S. Uehara
KEK, Ibaraki, Japan

The SuperKEKB e⁺e^- collider aims to reach a very high luminosity of 8× 10³⁵ cm^-2s^-1, by using highly focused ultra-low emittance bunches colliding every 4 ns, it is essential to have an orbit feedback system at the Interaction Point (IP) to maintain the optimum overlap between two colliding beams. Luminosity monitoring systems including LumiBelle2 and ZDLM as input to dithering feedback system used to stabilize the horizontal orbit at the IP were developed and will be described, including the detectors, mechanical set-up, DAQ. Preliminary measurements and analysis of background and first stage luminosity monitoring data collected will be reported and compared with simulation.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAL038

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)