Author: Turrioni, D.
Paper Title Page
WEPML025 Advantages and Challenges of Nb3Sn Superconducting Undulators 2734
 
  • A.V. Zlobin, E.Z. Barzi, D. Turrioni
    Fermilab, Batavia, Illinois, USA
  • Y. Ivanyushenkov, I. Kesgin
    ANL, Argonne, Illinois, USA
  
  Funding: This work is supported by Fermi Research Alliance, LLC, under contract No. DE-AC02-07CH11359 with the U.S. Department of Energy.
Superconducting undulators (SCUs) employ superconducting coils, and due to high critical current density in a superconductor, outperform undulators based on permanent magnets in terms of the level of magnetic field. So far, most of the SCUs, including devices built at Advanced Photon Source (APS), use Nb-Ti superconductor. Utilization of Nb3Sn conductor offers a possibility to increase the undulator field even further but requires to overcome certain challenges that are described in this paper. Based on experience of developing Nb3Sn accelerator magnets at Fermi National Accelerator Laboratory, possible solutions are discussed. The achievable field levels for Nb3Sn version of existing APS and the future APS-Upgrade superconducting undulators are also presented and discussed. 		 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPML025  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPAL036 Nb3Sn Thin Films for the Production of Higher Gradient SRF Cavities at Reduced Cost 3716
 
  • S.A. Kahn, M.A. Cummings
    Muons, Inc, Illinois, USA
  • E.Z. Barzi, D. Turrioni
    Fermilab, Batavia, Illinois, USA
  • S. Falletta
    Politecnico di Torino, Torino, Italy
  • A. Kikuchi
    NIMS, Tsukuba, Ibaraki, Japan
  
  High gradient superconducting cavities (SRF) will be needed for future accelerators. The higher gradient can achieve the high energy with fewer cavities. However the accelerating field of niobium cavities is limited by the peak magnetic field on the cavity surface. Cavities coated with Nb3Sn have a significantly larger Hc2 allowing the cavity to achieve a larger gradient. Measurements of Nb3Sn coated cavities have achieved about half the theoretical predicted gradient. It is possible to improve Nb3Sn plated cavity performance.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL036  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)