IPAC2018 - List of Authors (Sugimoto, M.)

Paper	Title	Page
TUPAF012	Commissioning of the Lipac Medium Energy Beam Transport Line	683
	I. Podadera, J. Castellanos, J.M. García, D. Gavela, A. Ibarra, D. Jiménez-Rey, A. Marqueta, L.M. Martinez Fresno, E. Molina Marinas, J. Mollá, P. Méndez, C. Oliver, D. Regidor, F. Toral, R. Varela, V. Villamayor, M. Weber, C. de la Morena CIEMAT, Madrid, Spain P. Cara, A. Marqueta, I. Moya Fusion for Energy, Garching, Germany T. Ebisawa, Y. Hirata, A. Ihara, Y. Ikeda, A. Kasugai, T. Kitano, K. Kondo, T. Narita, K. Sakamoto, T. Shinya, M. Sugimoto QST, Aomori, Japan D. Gex, A. Jokinen F4E, Germany J. Knaster IFMIF/EVEDA, Rokkasho, Japan M. Mendez Macias 7S, Peligros (Granada), Spain O. Nomen IREC, Sant Adria del Besos, Spain G. Pruneri Consorzio RFX, Associazione Euratom-ENEA sulla Fusione, Padova, Italy F. Scantamburlo INFN/LNL, Legnaro (PD), Italy
	Funding: This work has been funded by the Spanish Ministry of Economy and Competitiveness under the Agreement as published in BOE, 16/01/2013, page 1988 and the project FIS2013-40860-R. LIPAc* will be a 9 MeV, 125 mA CW deuteron accelerator which aims to validate the technology to be used as neutron source of the IFMIF facility. Those facilities are essential for future fusion reactors material research. A 175 MHz RFQ will increase the energy up to 5 MeV before a Superconducting RF (SRF) linac with eight 175 MHz Half Wave Resonators brings the particles up to the final energy of 9 MeV. Between both stages, a Medium Energy Beam Transport line (MEBT)** aims at transporting and matching the beam between the RFQ and the SRF linac. The transverse focusing of the beam is controlled by five quadrupole magnets with integrated steerers, grouped in one triplet and one doublet. Two buncher cavities handle the longitudinal dynamics. Two movable scraper systems are included to purify the beam optics coming out the RFQ and avoid losses in the SRF linac. In this contribution, checkout of the beamline and its ancillaries in Japan is reported. Tests carried out on the beamline prior to the MEBT beam commissioning are described, focusing in vacuum tests, magnets powering, buncher conditioning and scrapers movement. * P. Cara et al., IPAC16, MOPOY057 , p.985, Busan, Korea (2016) ** I. Podadera et al., LINAC2016, TUPLR041, p.554, East Lansing, USA (2016).
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAF012
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAF026	Beam Induced Fluorescence Measurements of 100 keV Deuterons in LIPAc Accelerator	1877
SUSPL052	use link to see paper's listing under its alternate paper code
	R. Varela, A. Guirao, L.M. Martínez, J. Mollá, I. Podadera CIEMAT, Madrid, Spain T. Akagi, R. Ichimiya, Y. Ikeda, M. Sugimoto QST, Aomori, Japan B. Bolzon, N. Chauvin CEA/IRFU, Gif-sur-Yvette, France P. Cara Fusion for Energy, Garching, Germany H. Dzitko F4E, Germany J. Knaster IFMIF/EVEDA, Rokkasho, Japan
	Funding: Work partially supported by the Spanish Ministry of Science and Innovation under project FIS2013-40860-R The LIPAc accelerator will be a linear CW deuteron accelerator capable of delivering a 9 MeV, 125 mA beam which aims to validate the technology that will be used in the future high power accelerator-driven neutron source, IFMIF. In summer 2017 a campaign of measurements was done during the injector commissioning, in which a Fluorescence Profile Monitor based on an Intensified CID camera (ICID) was used to measure the beam transverse profile at the extraction of the ion source. In this contribution we review the design of the ICID, its performance and discuss the measurements carried out. The performance of ICID monitors for its use in future accelerators will be assessed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAF026
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THXGBF2	Beam Commissioning of the IFMIF EVEDA Very High Power RFQ	2902
	E. Fagotti, L. Antoniazzi, L. Bellan, D. Bortolato, M. Comunian, A. Facco, M.G. Giacchini, F. Grespan, M. Montis, A. Palmieri, A. Pisent, F. Scantamburlo INFN/LNL, Legnaro (PD), Italy B. Bolzon, N. Chauvin, R. Gobin CEA/IRFU, Gif-sur-Yvette, France P. Cara IFMIF/EVEDA, Rokkasho, Japan H. Dzitko, D. Gex, A. Jokinen, G. Phillips F4E, Germany T. Ebisawa, A. Kasugai, K. Kondo, K. Sakamoto, T. Shinya, M. Sugimoto QST, Aomori, Japan R. Heidinger, A. Marqueta, I. Moya Fusion for Energy, Garching, Germany P. Mereu INFN-Torino, Torino, Italy G. Pruneri Consorzio RFX, Associazione Euratom-ENEA sulla Fusione, Padova, Italy M. Weber CIEMAT, Madrid, Spain
	IFMIF, the International Fusion Materials Irradiation Facility, is an accelerator-based neutron source that will use Li(d, xn) reactions to generate a flux of neutrons with a broad peak at 14 MeV equivalent to the conditions of the Deuterium-Tritium reactions in a fusion power plant. IFMIF is conceived for fusion materials testing. The IFMIF prototype linear accelerator (LIPAc) is jointly developed by Europe and Japan within the IFMIF EVEDA project: it is composed of an ion source, a LEBT, an RFQ, a MEBT and a SC linac, with a final energy of 9 MeV. The 4-vane Radio Frequency Quadrupole (RFQ), developed by INFN in Italy, will accelerate a 130 mA deuteron beam from 0.1 to 5 MeV in continuous wave, for a beam power of 650 kW. The 9.8 m long 175 MHz cavity is composed of 18 x 0.54 m long modules flanged together and aligned within 0.3 mm tolerance. The RFQ was completed, delivered and assembled at the Rokkasho site and is presently under extended RF tests. The second phase of beam commissioning (up to 2.5 MeV/u) was scheduled to start at the end of 2017. Several unexpected issues and incidents significantly delayed the original program, which is however proceeding step by step toward the full achievement of its goals.
	Slides THXGBF2 [5.318 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THXGBF2
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAK019	Beam Dynamics of the First Beams for IFMIF-EVEDA RFQ Commissioning	3246
	L. Bellan, C. Baltador, M. Comunian, E. Fagotti, F. Grespan, A. Pisent INFN/LNL, Legnaro (PD), Italy T. Akagi KEK, Ibaraki, Japan B. Bolzon, N. Chauvin CEA/DSM/IRFU, France H. Dzitko F4E, Germany K. Kondo, M. Sugimoto QST, Aomori, Japan I. Podadera CIEMAT, Madrid, Spain F. Scantamburlo IFMIF/EVEDA, Rokkasho, Japan
	The installation of the IFMIF-EVEDA RFQ, MEBT, LEBT, source and beam dump was completed in September 2017. The beam dynamics of the first beams for the IFMIF-EVEDA RFQ commissioning is presented. Moreover, a proposal for the CW RFQ steady state commissioning is shown, with a focus on the beam dynamics challenges of the beam transport after the RFQ.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAK019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Commissioning of the Lipac Medium Energy Beam Transport Line

683

I. Podadera, J. Castellanos, J.M. García, D. Gavela, A. Ibarra, D. Jiménez-Rey, A. Marqueta, L.M. Martinez Fresno, E. Molina Marinas, J. Mollá, P. Méndez, C. Oliver, D. Regidor, F. Toral, R. Varela, V. Villamayor, M. Weber, C. de la Morena
CIEMAT, Madrid, Spain
P. Cara, A. Marqueta, I. Moya
Fusion for Energy, Garching, Germany
T. Ebisawa, Y. Hirata, A. Ihara, Y. Ikeda, A. Kasugai, T. Kitano, K. Kondo, T. Narita, K. Sakamoto, T. Shinya, M. Sugimoto
QST, Aomori, Japan
D. Gex, A. Jokinen
F4E, Germany
J. Knaster
IFMIF/EVEDA, Rokkasho, Japan
M. Mendez Macias
7S, Peligros (Granada), Spain
O. Nomen
IREC, Sant Adria del Besos, Spain
G. Pruneri
Consorzio RFX, Associazione Euratom-ENEA sulla Fusione, Padova, Italy
F. Scantamburlo
INFN/LNL, Legnaro (PD), Italy

Funding: This work has been funded by the Spanish Ministry of Economy and Competitiveness under the Agreement as published in BOE, 16/01/2013, page 1988 and the project FIS2013-40860-R.
LIPAc* will be a 9 MeV, 125 mA CW deuteron accelerator which aims to validate the technology to be used as neutron source of the IFMIF facility. Those facilities are essential for future fusion reactors material research. A 175 MHz RFQ will increase the energy up to 5 MeV before a Superconducting RF (SRF) linac with eight 175 MHz Half Wave Resonators brings the particles up to the final energy of 9 MeV. Between both stages, a Medium Energy Beam Transport line (MEBT)** aims at transporting and matching the beam between the RFQ and the SRF linac. The transverse focusing of the beam is controlled by five quadrupole magnets with integrated steerers, grouped in one triplet and one doublet. Two buncher cavities handle the longitudinal dynamics. Two movable scraper systems are included to purify the beam optics coming out the RFQ and avoid losses in the SRF linac. In this contribution, checkout of the beamline and its ancillaries in Japan is reported. Tests carried out on the beamline prior to the MEBT beam commissioning are described, focusing in vacuum tests, magnets powering, buncher conditioning and scrapers movement.
* P. Cara et al., IPAC16, MOPOY057 , p.985, Busan, Korea (2016)
** I. Podadera et al., LINAC2016, TUPLR041, p.554, East Lansing, USA (2016).

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAF012

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAF026

Beam Induced Fluorescence Measurements of 100 keV Deuterons in LIPAc Accelerator

1877

SUSPL052

use link to see paper's listing under its alternate paper code

R. Varela, A. Guirao, L.M. Martínez, J. Mollá, I. Podadera
CIEMAT, Madrid, Spain
T. Akagi, R. Ichimiya, Y. Ikeda, M. Sugimoto
QST, Aomori, Japan
B. Bolzon, N. Chauvin
CEA/IRFU, Gif-sur-Yvette, France
P. Cara
Fusion for Energy, Garching, Germany
H. Dzitko
F4E, Germany
J. Knaster
IFMIF/EVEDA, Rokkasho, Japan

Funding: Work partially supported by the Spanish Ministry of Science and Innovation under project FIS2013-40860-R
The LIPAc accelerator will be a linear CW deuteron accelerator capable of delivering a 9 MeV, 125 mA beam which aims to validate the technology that will be used in the future high power accelerator-driven neutron source, IFMIF. In summer 2017 a campaign of measurements was done during the injector commissioning, in which a Fluorescence Profile Monitor based on an Intensified CID camera (ICID) was used to measure the beam transverse profile at the extraction of the ion source. In this contribution we review the design of the ICID, its performance and discuss the measurements carried out. The performance of ICID monitors for its use in future accelerators will be assessed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAF026

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THXGBF2

Beam Commissioning of the IFMIF EVEDA Very High Power RFQ

2902

E. Fagotti, L. Antoniazzi, L. Bellan, D. Bortolato, M. Comunian, A. Facco, M.G. Giacchini, F. Grespan, M. Montis, A. Palmieri, A. Pisent, F. Scantamburlo
INFN/LNL, Legnaro (PD), Italy
B. Bolzon, N. Chauvin, R. Gobin
CEA/IRFU, Gif-sur-Yvette, France
P. Cara
IFMIF/EVEDA, Rokkasho, Japan
H. Dzitko, D. Gex, A. Jokinen, G. Phillips
F4E, Germany
T. Ebisawa, A. Kasugai, K. Kondo, K. Sakamoto, T. Shinya, M. Sugimoto
QST, Aomori, Japan
R. Heidinger, A. Marqueta, I. Moya
Fusion for Energy, Garching, Germany
P. Mereu
INFN-Torino, Torino, Italy
G. Pruneri
Consorzio RFX, Associazione Euratom-ENEA sulla Fusione, Padova, Italy
M. Weber
CIEMAT, Madrid, Spain

IFMIF, the International Fusion Materials Irradiation Facility, is an accelerator-based neutron source that will use Li(d, xn) reactions to generate a flux of neutrons with a broad peak at 14 MeV equivalent to the conditions of the Deuterium-Tritium reactions in a fusion power plant. IFMIF is conceived for fusion materials testing. The IFMIF prototype linear accelerator (LIPAc) is jointly developed by Europe and Japan within the IFMIF EVEDA project: it is composed of an ion source, a LEBT, an RFQ, a MEBT and a SC linac, with a final energy of 9 MeV. The 4-vane Radio Frequency Quadrupole (RFQ), developed by INFN in Italy, will accelerate a 130 mA deuteron beam from 0.1 to 5 MeV in continuous wave, for a beam power of 650 kW. The 9.8 m long 175 MHz cavity is composed of 18 x 0.54 m long modules flanged together and aligned within 0.3 mm tolerance. The RFQ was completed, delivered and assembled at the Rokkasho site and is presently under extended RF tests. The second phase of beam commissioning (up to 2.5 MeV/u) was scheduled to start at the end of 2017. Several unexpected issues and incidents significantly delayed the original program, which is however proceeding step by step toward the full achievement of its goals.

Slides THXGBF2 [5.318 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THXGBF2

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAK019

Beam Dynamics of the First Beams for IFMIF-EVEDA RFQ Commissioning

3246

L. Bellan, C. Baltador, M. Comunian, E. Fagotti, F. Grespan, A. Pisent
INFN/LNL, Legnaro (PD), Italy
T. Akagi
KEK, Ibaraki, Japan
B. Bolzon, N. Chauvin
CEA/DSM/IRFU, France
H. Dzitko
F4E, Germany
K. Kondo, M. Sugimoto
QST, Aomori, Japan
I. Podadera
CIEMAT, Madrid, Spain
F. Scantamburlo
IFMIF/EVEDA, Rokkasho, Japan

The installation of the IFMIF-EVEDA RFQ, MEBT, LEBT, source and beam dump was completed in September 2017. The beam dynamics of the first beams for the IFMIF-EVEDA RFQ commissioning is presented. Moreover, a proposal for the CW RFQ steady state commissioning is shown, with a focus on the beam dynamics challenges of the beam transport after the RFQ.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAK019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)