IPAC2018 - List of Authors (Shinozaki, S.)

Paper	Title	Page
WEPAL017	Adaptive Feedforward Control Design Based on Simulink for the J-PARC LINAC LLRF System	2187
	S. Li J-PARC, KEK & JAEA, Ibaraki-ken, Japan Z. Fang, Y. Fukui, K. Futatsukawa, F. Qiu KEK, Ibaraki, Japan S. Mizobata, Y. Sato, S. Shinozaki JAEA/J-PARC, Tokai-mura, Japan
	In j-parc linac, for dealing with high beam loading effect, an adaptive feedforward control method which based on iterative learning control was put forward. At the same time, in order to verify its effectiveness before it is officially put into use, an llrf system simulation model was built in simulink, matlab. In this paper, the architecture of llrf system simulation model will be introduced. The result of iterative learning control (ILC) is summarized.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAL017
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPML051	Improvement of the Chopper System for rf Deflector at the J-PARC Linac	2816
	K. Futatsukawa, Z. Fang, Y. Fukui KEK, Ibaraki, Japan Y. Sato Nippon Advanced Technology Co., Ltd., Tokai, Japan S. Shinozaki JAEA/J-PARC, Tokai-mura, Japan
	In the J-PARC linac, the RF deflector has been operated to kick the wasted beam and to shape the intermediate-pulse like the comb structure. Then about 50% of the beam current is removed by leading the scraper and the rest beam current is injected to the downstream synchrotron ring RCS. The fast rising time and falling time, the cavity with low loading Q value in the chopper system are required to decrease the incomplete kicked beam. However, there was the ringing of the RF field on the chopper cavity, and it influenced the beam rising time. The chopper controllers, which has the fast RF -switch to make the particular RF according to the intermediate-pulses, were improved for the RF falling time by outputting short pulses with inverting phase. The beam study for the new system was successfully done. In this paper, I would like to introduce this system and to show the results of the beam study.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPML051
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Adaptive Feedforward Control Design Based on Simulink for the J-PARC LINAC LLRF System

2187

S. Li
J-PARC, KEK & JAEA, Ibaraki-ken, Japan
Z. Fang, Y. Fukui, K. Futatsukawa, F. Qiu
KEK, Ibaraki, Japan
S. Mizobata, Y. Sato, S. Shinozaki
JAEA/J-PARC, Tokai-mura, Japan

In j-parc linac, for dealing with high beam loading effect, an adaptive feedforward control method which based on iterative learning control was put forward. At the same time, in order to verify its effectiveness before it is officially put into use, an llrf system simulation model was built in simulink, matlab. In this paper, the architecture of llrf system simulation model will be introduced. The result of iterative learning control (ILC) is summarized.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAL017

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPML051

Improvement of the Chopper System for rf Deflector at the J-PARC Linac

2816

K. Futatsukawa, Z. Fang, Y. Fukui
KEK, Ibaraki, Japan
Y. Sato
Nippon Advanced Technology Co., Ltd., Tokai, Japan
S. Shinozaki
JAEA/J-PARC, Tokai-mura, Japan

In the J-PARC linac, the RF deflector has been operated to kick the wasted beam and to shape the intermediate-pulse like the comb structure. Then about 50% of the beam current is removed by leading the scraper and the rest beam current is injected to the downstream synchrotron ring RCS. The fast rising time and falling time, the cavity with low loading Q value in the chopper system are required to decrease the incomplete kicked beam. However, there was the ringing of the RF field on the chopper cavity, and it influenced the beam rising time. The chopper controllers, which has the fast RF -switch to make the particular RF according to the intermediate-pulses, were improved for the RF falling time by outputting short pulses with inverting phase. The beam study for the new system was successfully done. In this paper, I would like to introduce this system and to show the results of the beam study.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPML051

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)