IPAC2018 - List of Authors (Serpico, C.)

Paper	Title	Page
WEPMF067	A High Gradient Solution for Increasing the Energy of the FERMI Linac	2525
	C. Serpico, I. Cudin, S. Di Mitri, N. Shafqat, M. Svandrlik Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy M. Bopp, R. Zennaro PSI, Villigen PSI, Switzerland
	FERMI is the seeded Free Electron Laser (FEL) user facility at Elettra laboratory in Trieste, operating in the VUV to soft X-rays spectral range. In order to extend the FEL spectral range to shorter wavelengths, a feasibility study for increasing the Linac energy from 1.5 GeV to 1.8 GeV is actually going on. The design of new S-band accelerating structures, intended to replace the present Backward Travelling Wave sections, is presented. Such design is tailored for high gradient operation, low breakdown rates and low wakefield contribution. In this paper, we will also present the first, short prototype that has been built in collaboration with Paul Scherrer Institute (PSI).
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPMF067
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMK103	Initial Testing of Techniques for Large Scale Rf Conditioning for the Compact Linear Collider	4548
SUSPF019	use link to see paper's listing under its alternate paper code
	T.G. Lucas, M.J. Boland, P.J. Giansiracusa, R.P. Rassool, M. Volpi The University of Melbourne, Melbourne, Victoria, Australia N. Catalán Lasheras, A. Grudiev, T. Lefèvre, G. McMonagle, I. Syratchev, B.J. Woolley, W. Wuensch, V. del Pozo Romano CERN, Geneva, Switzerland J. Paszkiewicz University of Oxford, Oxford, United Kingdom C. Serpico Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy A. Vnuchenko IFIC, Valencia, Spain R. Zennaro PSI, Villigen PSI, Switzerland
	Nominal operating conditions for the Compact Linear Collider (CLIC) 380 GeV requires 72 MV/m loaded accelerating gradients for a 180 ns flat-top pulse. Achieving this requires extensive RF conditioning which past tests have demonstrated can take several months per structure, when conditioned at the nominal repetition rate of 50 Hz. At CERN there are three individual X-band test stands currently operational, testing up to 6 structures concurrently. For CLIC's 380 GeV design, 28,000 accelerating structures will make up the main linac. For a large scale conditioning programme, it is important to understand the RF conditioning process and to optimise the time taken for conditioning. In this paper, we review recent X-band testing results from CERN's test stands. With these results we investigate how to optimise the conditioning process and demonstrate the feasibility of pre-conditioning the structures at a higher repetition rate before installation into the main linac.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK103
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMK104	High Power and High Repetition Rate X-band Power Source Using Multiple Klystrons	4552
	M. Volpi, M.J. Boland, P.J. Giansiracusa, T.G. Lucas, R.P. Rassool The University of Melbourne, Melbourne, Victoria, Australia N. Catalán Lasheras, A. Grudiev, G. McMonagle, I. Syratchev, B.J. Woolley, W. Wuensch, V. del Pozo Romano CERN, Geneva, Switzerland J. Paszkiewicz University of Oxford, Oxford, United Kingdom C. Serpico Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy A. Vnuchenko IFIC, Valencia, Spain
	In July 2016, the first X-band test facility operating with two interwoven, 6 MW klystron pulses was commissioned at CERN. Outputting up to 46 MW after pulse compression, the new test stand allows testing of two structures concurrently with repetition rates up to 400 Hz in each line. RF commissioning of all four lines has been completed and testing of high gradient accelerating structures for the Compact Linear Collider has commenced. Operations have been ongoing for more than a year, where dedicated control algorithms have been developed to conditioning the structure and to keep the pulse compressors tuned. Significant progress has been made in understanding the conditioning of two structures that are sharing an interlock and vacuum system. The high repetition rate is already showing the significantly reduced time needed to condition accelerating structures.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK104
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

A High Gradient Solution for Increasing the Energy of the FERMI Linac

2525

C. Serpico, I. Cudin, S. Di Mitri, N. Shafqat, M. Svandrlik
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
M. Bopp, R. Zennaro
PSI, Villigen PSI, Switzerland

FERMI is the seeded Free Electron Laser (FEL) user facility at Elettra laboratory in Trieste, operating in the VUV to soft X-rays spectral range. In order to extend the FEL spectral range to shorter wavelengths, a feasibility study for increasing the Linac energy from 1.5 GeV to 1.8 GeV is actually going on. The design of new S-band accelerating structures, intended to replace the present Backward Travelling Wave sections, is presented. Such design is tailored for high gradient operation, low breakdown rates and low wakefield contribution. In this paper, we will also present the first, short prototype that has been built in collaboration with Paul Scherrer Institute (PSI).

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPMF067

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMK103

Initial Testing of Techniques for Large Scale Rf Conditioning for the Compact Linear Collider

4548

SUSPF019

use link to see paper's listing under its alternate paper code

T.G. Lucas, M.J. Boland, P.J. Giansiracusa, R.P. Rassool, M. Volpi
The University of Melbourne, Melbourne, Victoria, Australia
N. Catalán Lasheras, A. Grudiev, T. Lefèvre, G. McMonagle, I. Syratchev, B.J. Woolley, W. Wuensch, V. del Pozo Romano
CERN, Geneva, Switzerland
J. Paszkiewicz
University of Oxford, Oxford, United Kingdom
C. Serpico
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
A. Vnuchenko
IFIC, Valencia, Spain
R. Zennaro
PSI, Villigen PSI, Switzerland

Nominal operating conditions for the Compact Linear Collider (CLIC) 380 GeV requires 72 MV/m loaded accelerating gradients for a 180 ns flat-top pulse. Achieving this requires extensive RF conditioning which past tests have demonstrated can take several months per structure, when conditioned at the nominal repetition rate of 50 Hz. At CERN there are three individual X-band test stands currently operational, testing up to 6 structures concurrently. For CLIC's 380 GeV design, 28,000 accelerating structures will make up the main linac. For a large scale conditioning programme, it is important to understand the RF conditioning process and to optimise the time taken for conditioning. In this paper, we review recent X-band testing results from CERN's test stands. With these results we investigate how to optimise the conditioning process and demonstrate the feasibility of pre-conditioning the structures at a higher repetition rate before installation into the main linac.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK103

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMK104

High Power and High Repetition Rate X-band Power Source Using Multiple Klystrons

4552

M. Volpi, M.J. Boland, P.J. Giansiracusa, T.G. Lucas, R.P. Rassool
The University of Melbourne, Melbourne, Victoria, Australia
N. Catalán Lasheras, A. Grudiev, G. McMonagle, I. Syratchev, B.J. Woolley, W. Wuensch, V. del Pozo Romano
CERN, Geneva, Switzerland
J. Paszkiewicz
University of Oxford, Oxford, United Kingdom
C. Serpico
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
A. Vnuchenko
IFIC, Valencia, Spain

In July 2016, the first X-band test facility operating with two interwoven, 6 MW klystron pulses was commissioned at CERN. Outputting up to 46 MW after pulse compression, the new test stand allows testing of two structures concurrently with repetition rates up to 400 Hz in each line. RF commissioning of all four lines has been completed and testing of high gradient accelerating structures for the Compact Linear Collider has commenced. Operations have been ongoing for more than a year, where dedicated control algorithms have been developed to conditioning the structure and to keep the pulse compressors tuned. Significant progress has been made in understanding the conditioning of two structures that are sharing an interlock and vacuum system. The high repetition rate is already showing the significantly reduced time needed to condition accelerating structures.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK104

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)