IPAC2018 - List of Authors (Safranek, J.A.)

Paper	Title	Page
WEPAF055	Time-Synchronized Beam Diagnostics at SPEAR3	1948
SUSPF102	use link to see paper's listing under its alternate paper code
	Q. Lin, Z.H. Sun Donghua University, Shanghai, People's Republic of China P. Boussina, W.J. Corbett, D.J. Martin, J.A. Safranek, K. Tian SLAC, Menlo Park, California, USA D. Teytelman Dimtel, San Jose, USA
	The SPEAR3 timing system supplies a 10Hz trigger pulse synchronous with charge injection into the main storage ring. In the past the 10Hz pulse train has been used to study injected charge transients as seen by visible-light synchrotron radiation diagnostics and turn-by-turn BPMs. More recently the 10Hz pulse has been used to synchronize the bunch-by-bunch feedback data acquisition system with other triggered diagnostic systems. The suite of measurement systems can be used to study injected beam dynamics, grow/damp instability transients and drive/damp physics.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAF055
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAL078	In-Vacuum Lambertson Septum for SPEAR3 Low Emittance Injection	3831
	M.A.G. Johansson, J. Langton, J.A. Safranek SLAC, Menlo Park, California, USA S.C. Gottschalk STI Magnetics LLC, Woodinville, USA
	Funding: Work supported by DOE Contract No. DE-AC02-76SF00515 A new in-vacuum Lambertson septum magnet is being designed for the SPEAR3 storage ring, intended to replace the existing septum to allow injection into a new lower emittance operation mode for SPEAR3. The new septum design is constrained to fit in the same length and have the same bend angle as the existing injection septum, so as to minimize changes to surrounding storage ring and transfer line components, while also meeting stringent requirements on the stored beam leakage field. This has led to a design using Vanadium Permendur alloy for the septum pole pieces, with shaping of the inner profile of the stored beam channel to minimize the leakage fields indicated in 2D and 3D magnetic simulations.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL078
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

WEPAF055

Time-Synchronized Beam Diagnostics at SPEAR3

1948

SUSPF102

use link to see paper's listing under its alternate paper code

Q. Lin, Z.H. Sun
Donghua University, Shanghai, People's Republic of China
P. Boussina, W.J. Corbett, D.J. Martin, J.A. Safranek, K. Tian
SLAC, Menlo Park, California, USA
D. Teytelman
Dimtel, San Jose, USA

The SPEAR3 timing system supplies a 10Hz trigger pulse synchronous with charge injection into the main storage ring. In the past the 10Hz pulse train has been used to study injected charge transients as seen by visible-light synchrotron radiation diagnostics and turn-by-turn BPMs. More recently the 10Hz pulse has been used to synchronize the bunch-by-bunch feedback data acquisition system with other triggered diagnostic systems. The suite of measurement systems can be used to study injected beam dynamics, grow/damp instability transients and drive/damp physics.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAF055

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAL078

In-Vacuum Lambertson Septum for SPEAR3 Low Emittance Injection

3831

M.A.G. Johansson, J. Langton, J.A. Safranek
SLAC, Menlo Park, California, USA
S.C. Gottschalk
STI Magnetics LLC, Woodinville, USA

Funding: Work supported by DOE Contract No. DE-AC02-76SF00515
A new in-vacuum Lambertson septum magnet is being designed for the SPEAR3 storage ring, intended to replace the existing septum to allow injection into a new lower emittance operation mode for SPEAR3. The new septum design is constrained to fit in the same length and have the same bend angle as the existing injection septum, so as to minimize changes to surrounding storage ring and transfer line components, while also meeting stringent requirements on the stored beam leakage field. This has led to a design using Vanadium Permendur alloy for the septum pole pieces, with shaping of the inner profile of the stored beam channel to minimize the leakage fields indicated in 2D and 3D magnetic simulations.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL078

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)