IPAC2018 - List of Authors (Rude, V.)

Paper	Title	Page
WEPAF066	The New CLIC Main Linac Installation and Alignment Strategy	1979
	H. Mainaud Durand, J. Gayde, J. Jaros, M. Sosin, A. P. Zemanek CERN, Geneva, Switzerland V. Rude ESGT-CNAM, Le Mans, France
	A complete solution has been proposed for the pre-alignment of the CLIC main linac in 2012 for the Conceptual Design Report. Two recent studies provide new perspectives for such a pre-alignment. First in a study on Particle Accelerator Components' Metrology and Alignment to the Nanometre scale (PACMAN), new solutions to fiducialise and align different types of components within a micrometric accuracy on the same support were proposed and validated, using a stretched wire. Secondly, a 5 degree of freedom adjustment platform with plug-in motors showed a very accurate and efficient way to adjust remotely components. By combining the results of both studies, two scenarios of installation and alignment for the CLIC main linac are proposed, providing micrometric and automatized solutions of micrometric assembly, fiducialisation and alignment in metrological labs or in the tunnel. In this paper, the outcome of the two studies are presented; the two scenarios of installation and alignment are then detailed and discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAF066
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAF068	Frequency Scanning Interferometry as New Solution for on-Line Monitoring Inside a Cryostat for the HL-LHC project	1986
	H. Mainaud Durand, T. Dijoud, J. Gayde, F. Micolon, M. Sosin CERN, Geneva, Switzerland M. Duquenne, V. Rude ESGT-CNAM, Le Mans, France
	Funding: Research supported by the HL-LHC project For the HL-LHC project, the cryostats of the key components will be equipped permanently with an on-line position monitoring system based on Frequency Scanning Interferometry (FSI). Such a system, based on absolute distance measurement, will determine the position of the inner triplet cold masses w.r.t. their cryostat and the position of the crab cavities also inside their cryostat, within an uncertainty of measurement of 0.1 mm, in a harsh environment: cold temperature of 2 K and high radiation level of the order of 1 MGy. The FSI system was validated first successfully on one LHC dipole cryostat and its associated cold mass to undergo qualification tests under different conditions: warm, vacuum and cold (2K). The FSI system also equips the first crab cavities prototype cryostat. The configuration of the FIS system chosen after simulations, the conditions of tests as well as their results and analysis are presented in this paper.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAF068
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

The New CLIC Main Linac Installation and Alignment Strategy

1979

H. Mainaud Durand, J. Gayde, J. Jaros, M. Sosin, A. P. Zemanek
CERN, Geneva, Switzerland
V. Rude
ESGT-CNAM, Le Mans, France

A complete solution has been proposed for the pre-alignment of the CLIC main linac in 2012 for the Conceptual Design Report. Two recent studies provide new perspectives for such a pre-alignment. First in a study on Particle Accelerator Components' Metrology and Alignment to the Nanometre scale (PACMAN), new solutions to fiducialise and align different types of components within a micrometric accuracy on the same support were proposed and validated, using a stretched wire. Secondly, a 5 degree of freedom adjustment platform with plug-in motors showed a very accurate and efficient way to adjust remotely components. By combining the results of both studies, two scenarios of installation and alignment for the CLIC main linac are proposed, providing micrometric and automatized solutions of micrometric assembly, fiducialisation and alignment in metrological labs or in the tunnel. In this paper, the outcome of the two studies are presented; the two scenarios of installation and alignment are then detailed and discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAF066

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAF068

Frequency Scanning Interferometry as New Solution for on-Line Monitoring Inside a Cryostat for the HL-LHC project

1986

H. Mainaud Durand, T. Dijoud, J. Gayde, F. Micolon, M. Sosin
CERN, Geneva, Switzerland
M. Duquenne, V. Rude
ESGT-CNAM, Le Mans, France

Funding: Research supported by the HL-LHC project
For the HL-LHC project, the cryostats of the key components will be equipped permanently with an on-line position monitoring system based on Frequency Scanning Interferometry (FSI). Such a system, based on absolute distance measurement, will determine the position of the inner triplet cold masses w.r.t. their cryostat and the position of the crab cavities also inside their cryostat, within an uncertainty of measurement of 0.1 mm, in a harsh environment: cold temperature of 2 K and high radiation level of the order of 1 MGy. The FSI system was validated first successfully on one LHC dipole cryostat and its associated cold mass to undergo qualification tests under different conditions: warm, vacuum and cold (2K). The FSI system also equips the first crab cavities prototype cryostat. The configuration of the FIS system chosen after simulations, the conditions of tests as well as their results and analysis are presented in this paper.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAF068

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)