IPAC2018 - List of Authors (Rogind, D.)

Paper	Title	Page
WEPAL039	LCLS-II Gun/Buncher LLRF System Design	2258
	G. Huang, K.S. Campbell, L.R. Doolittle, J.A. Jones, Q. Qiang, C. Serrano LBNL, Berkeley, California, USA S. Babel, A.L. Benwell, M. Boyes, G.W. Brown, D. Cha, J.H. De Long, J.A. Diaz Cruz, B. Hong, A. McCollough, A. Ratti, C.H. Rivetta, D. Rogind, F. Zhou SLAC, Menlo Park, California, USA R. Bachimanchi, C. Hovater, D.J. Seidman JLab, Newport News, Virginia, USA B.E. Chase, E. Cullerton, J. Einstein-Curtis, D.W. Klepec Fermilab, Batavia, Illinois, USA J.A. Diaz Cruz CSU, Fort Collins, Colorado, USA
	Funding: This work was supported by the LCLS-II Project and the U.S. Department of Energy, Contract n. DE-AC02-05CH11231. For a free electron laser, the stability of injector is critical to the final electron beam parameters, e.g., beam energy, beam arrival time, and eventually it determines the photon quality. The LCLS-II project's injector contains a VHF copper cavity as the gun and a two-cell L-band copper cavity as its buncher. The cavity designs are inherited from the APEX design, but requires more field stability than demonstrated in APEX operation. The gun LLRF system design uses a connectorized RF front end and low noise digitizer, together with the same general purpose FPGA carrier board used in the LCLS-II SRF LLRF system. The buncher LLRF system directly adopts the SRF LLRF chassis design, but programs the controller to run the normal conducting cavities. In this paper, we describe the gun/buncher LLRF system design, including the hardware design, the firmware design and bench test.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAL039
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

LCLS-II Gun/Buncher LLRF System Design

2258

G. Huang, K.S. Campbell, L.R. Doolittle, J.A. Jones, Q. Qiang, C. Serrano
LBNL, Berkeley, California, USA
S. Babel, A.L. Benwell, M. Boyes, G.W. Brown, D. Cha, J.H. De Long, J.A. Diaz Cruz, B. Hong, A. McCollough, A. Ratti, C.H. Rivetta, D. Rogind, F. Zhou
SLAC, Menlo Park, California, USA
R. Bachimanchi, C. Hovater, D.J. Seidman
JLab, Newport News, Virginia, USA
B.E. Chase, E. Cullerton, J. Einstein-Curtis, D.W. Klepec
Fermilab, Batavia, Illinois, USA
J.A. Diaz Cruz
CSU, Fort Collins, Colorado, USA

Funding: This work was supported by the LCLS-II Project and the U.S. Department of Energy, Contract n. DE-AC02-05CH11231.
For a free electron laser, the stability of injector is critical to the final electron beam parameters, e.g., beam energy, beam arrival time, and eventually it determines the photon quality. The LCLS-II project's injector contains a VHF copper cavity as the gun and a two-cell L-band copper cavity as its buncher. The cavity designs are inherited from the APEX design, but requires more field stability than demonstrated in APEX operation. The gun LLRF system design uses a connectorized RF front end and low noise digitizer, together with the same general purpose FPGA carrier board used in the LCLS-II SRF LLRF system. The buncher LLRF system directly adopts the SRF LLRF chassis design, but programs the controller to run the normal conducting cavities. In this paper, we describe the gun/buncher LLRF system design, including the hardware design, the firmware design and bench test.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAL039

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)