IPAC2018 - List of Authors (Rivetta, C.H.)

Paper	Title	Page
TUZGBD4	Impact of a Wideband Feedback Prototype System on TMCI in the SPS	1208
	W. Höfle, H. Bartosik, E.R. Bjørsvik, G. Kotzian, T.E. Levens, K.S.B. Li CERN, Geneva, Switzerland J.E. Dusatko, J.D. Fox, C.H. Rivetta SLAC, Menlo Park, California, USA O. Turgut Stanford University, Stanford, California, USA
	The transverse mode coupling instability (TMCI) in the SPS has been identified as one of the potential performance limitations for future high intensity LHC beams that will be required for the High Luminosity (HL)-LHC era and is being addressed by the LHC Injector Upgrade Project (LIU). A potential mitigation can be provided by wideband feedback systems with a frequency reach of about 1 GHz . For this reason, the development of a prototype system has been started in a CERN collaboration within the US-LARP framework in 2008. In this report we present latest experimental results in 2017 where this prototype system was used in single and multi-bunch studies. In particular, a successful mitigation against TMCI at injection could be demonstrated in single bunch studies.
	Slides TUZGBD4 [15.116 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUZGBD4
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAL039	LCLS-II Gun/Buncher LLRF System Design	2258
	G. Huang, K.S. Campbell, L.R. Doolittle, J.A. Jones, Q. Qiang, C. Serrano LBNL, Berkeley, California, USA S. Babel, A.L. Benwell, M. Boyes, G.W. Brown, D. Cha, J.H. De Long, J.A. Diaz Cruz, B. Hong, A. McCollough, A. Ratti, C.H. Rivetta, D. Rogind, F. Zhou SLAC, Menlo Park, California, USA R. Bachimanchi, C. Hovater, D.J. Seidman JLab, Newport News, Virginia, USA B.E. Chase, E. Cullerton, J. Einstein-Curtis, D.W. Klepec Fermilab, Batavia, Illinois, USA J.A. Diaz Cruz CSU, Fort Collins, Colorado, USA
	Funding: This work was supported by the LCLS-II Project and the U.S. Department of Energy, Contract n. DE-AC02-05CH11231. For a free electron laser, the stability of injector is critical to the final electron beam parameters, e.g., beam energy, beam arrival time, and eventually it determines the photon quality. The LCLS-II project's injector contains a VHF copper cavity as the gun and a two-cell L-band copper cavity as its buncher. The cavity designs are inherited from the APEX design, but requires more field stability than demonstrated in APEX operation. The gun LLRF system design uses a connectorized RF front end and low noise digitizer, together with the same general purpose FPGA carrier board used in the LCLS-II SRF LLRF system. The buncher LLRF system directly adopts the SRF LLRF chassis design, but programs the controller to run the normal conducting cavities. In this paper, we describe the gun/buncher LLRF system design, including the hardware design, the firmware design and bench test.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAL039
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAL079	Control of Intra-Bunch Vertical Motion in the SPS with GHz Bandwidth Feedback	2365
	J.D. Fox, J.E. Dusatko, C.H. Rivetta, O. Turgut SLAC, Menlo Park, California, USA H. Bartosik, E.R. Bjørsvik, W. Höfle, G. Kotzian, K.S.B. Li, E. Métral, B. Salvant, U. Wehrle CERN, Geneva, Switzerland S. De Santis LBNL, Berkeley, California, USA
	Funding: Work supported by the U.S. Department of Energy DE-AC02-76SF00515, US LHC Accelerator Research program, CERN LHC Injector Upgrade Project and the US-Japan Cooperative Program in High Energy Physics. A GHz bandwidth vertical beam feedback system has been in development at the CERN SPS to explore control of unstable beam motion in single bunch and bunch train configurations. We present measurements and recent studies of stable and unstable motion for intensities up to 2x10¹¹ p/bunch. The system has been operated at 3.2GS/s with 16 samples across a 5 ns RF bucket (4.2 ns 3 σ bunch at injection). Experimental results confirm damping of intra-bunch instabilities in Q20, Q22 and Q26 optics configurations. Instabilities with growth times of 200 turns are well-controlled from injection, consistent with the achievable gains for the 2 installed stripline kickers with 1 kW broadband total power. Studies of the damping achieved with the diagonal FIR controllers and existing system noise floors are highlighted to evaluate benefits of MIMO feedback controllers. The work is motivated by anticipated intensity increases from the LIU and HL-LHC upgrade programs, and has included the development of a new 1 GHz bandwidth slotline kicker structure and associated amplifier system
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAL079
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Impact of a Wideband Feedback Prototype System on TMCI in the SPS

1208

W. Höfle, H. Bartosik, E.R. Bjørsvik, G. Kotzian, T.E. Levens, K.S.B. Li
CERN, Geneva, Switzerland
J.E. Dusatko, J.D. Fox, C.H. Rivetta
SLAC, Menlo Park, California, USA
O. Turgut
Stanford University, Stanford, California, USA

The transverse mode coupling instability (TMCI) in the SPS has been identified as one of the potential performance limitations for future high intensity LHC beams that will be required for the High Luminosity (HL)-LHC era and is being addressed by the LHC Injector Upgrade Project (LIU). A potential mitigation can be provided by wideband feedback systems with a frequency reach of about 1 GHz . For this reason, the development of a prototype system has been started in a CERN collaboration within the US-LARP framework in 2008. In this report we present latest experimental results in 2017 where this prototype system was used in single and multi-bunch studies. In particular, a successful mitigation against TMCI at injection could be demonstrated in single bunch studies.

Slides TUZGBD4 [15.116 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUZGBD4

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAL039

LCLS-II Gun/Buncher LLRF System Design

2258

G. Huang, K.S. Campbell, L.R. Doolittle, J.A. Jones, Q. Qiang, C. Serrano
LBNL, Berkeley, California, USA
S. Babel, A.L. Benwell, M. Boyes, G.W. Brown, D. Cha, J.H. De Long, J.A. Diaz Cruz, B. Hong, A. McCollough, A. Ratti, C.H. Rivetta, D. Rogind, F. Zhou
SLAC, Menlo Park, California, USA
R. Bachimanchi, C. Hovater, D.J. Seidman
JLab, Newport News, Virginia, USA
B.E. Chase, E. Cullerton, J. Einstein-Curtis, D.W. Klepec
Fermilab, Batavia, Illinois, USA
J.A. Diaz Cruz
CSU, Fort Collins, Colorado, USA

Funding: This work was supported by the LCLS-II Project and the U.S. Department of Energy, Contract n. DE-AC02-05CH11231.
For a free electron laser, the stability of injector is critical to the final electron beam parameters, e.g., beam energy, beam arrival time, and eventually it determines the photon quality. The LCLS-II project's injector contains a VHF copper cavity as the gun and a two-cell L-band copper cavity as its buncher. The cavity designs are inherited from the APEX design, but requires more field stability than demonstrated in APEX operation. The gun LLRF system design uses a connectorized RF front end and low noise digitizer, together with the same general purpose FPGA carrier board used in the LCLS-II SRF LLRF system. The buncher LLRF system directly adopts the SRF LLRF chassis design, but programs the controller to run the normal conducting cavities. In this paper, we describe the gun/buncher LLRF system design, including the hardware design, the firmware design and bench test.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAL039

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAL079

Control of Intra-Bunch Vertical Motion in the SPS with GHz Bandwidth Feedback

2365

J.D. Fox, J.E. Dusatko, C.H. Rivetta, O. Turgut
SLAC, Menlo Park, California, USA
H. Bartosik, E.R. Bjørsvik, W. Höfle, G. Kotzian, K.S.B. Li, E. Métral, B. Salvant, U. Wehrle
CERN, Geneva, Switzerland
S. De Santis
LBNL, Berkeley, California, USA

Funding: Work supported by the U.S. Department of Energy DE-AC02-76SF00515, US LHC Accelerator Research program, CERN LHC Injector Upgrade Project and the US-Japan Cooperative Program in High Energy Physics.
A GHz bandwidth vertical beam feedback system has been in development at the CERN SPS to explore control of unstable beam motion in single bunch and bunch train configurations. We present measurements and recent studies of stable and unstable motion for intensities up to 2x10¹¹ p/bunch. The system has been operated at 3.2GS/s with 16 samples across a 5 ns RF bucket (4.2 ns 3 σ bunch at injection). Experimental results confirm damping of intra-bunch instabilities in Q20, Q22 and Q26 optics configurations. Instabilities with growth times of 200 turns are well-controlled from injection, consistent with the achievable gains for the 2 installed stripline kickers with 1 kW broadband total power. Studies of the damping achieved with the diagonal FIR controllers and existing system noise floors are highlighted to evaluate benefits of MIMO feedback controllers. The work is motivated by anticipated intensity increases from the LIU and HL-LHC upgrade programs, and has included the development of a new 1 GHz bandwidth slotline kicker structure and associated amplifier system

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAL079

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)