IPAC2018 - List of Authors (Renner, E.)

Paper	Title	Page
MOPMF062	Upgrade of the Dilution System for HL-LHC	261
	C. Wiesner, W. Bartmann, C. Bracco, M. Calviani, E. Carlier, L. Ducimetière, M.I. Frankl, M.A. Fraser, S.S. Gilardoni, B. Goddard, T. Kramer, A. Lechner, N. Magnin, A. Perillo-Marcone, T. Polzin, E. Renner, V. Senaj CERN, Geneva, Switzerland
	The LHC Beam Dump System is one of the most critical systems for reliable and safe operation of the LHC. A dedicated dilution system is required to sweep the beam over the front face of the graphite dump core in order to reduce the deposited energy density. The High Luminosity Large Hadron Collider (HL-LHC) project foresees to increase the total beam intensity in the ring by nearly a factor of two, resulting in a correspondingly higher energy deposition in the dump core. In this paper, the beam sweep pattern and energy deposition for the case of normal dilution as well as for the relevant failure cases are presented. The implications as well as possible mitigations and upgrade measures for the dilution system, such as decreasing the pulse-generator voltage, adding two additional kickers, and implementing a retrigger system, are discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF062
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAF058	Optimization of the FCC-hh Beam Extraction System Regarding Failure Avoidance and Mitigation	850
	E. Renner, M.J. Barnes, W. Bartmann, F. Burkart, E. Carlier, L. Ducimetière, B. Goddard, T. Kramer, A. Lechner, N. Magnin, V. Senaj, J.A. Uythoven, P. Van Trappen, C. Wiesner CERN, Geneva, Switzerland
	A core part of the Future Circular Collider (FCC) study is a high energy hadron-hadron collider with a circumference of nearly 100~km and a center of mass beam energy of 100~TeV. The energy stored in one beam at top energy is 8.3~GJ, more than 20 times that of the LHC beams. Due to the large damage potential of the FCC-hh beam, the design of the beam extraction system is dominated by machine protection considerations and the requirement of avoiding any material damage in case of an asynchronous beam dump. Erratic operation of one or more extraction kickers is a main contributor to asynchronous beam dumps. The presented study shows ways to reduce the probability and mitigate the impact of erratic kicker switching. Key proposals to achieve this include layout considerations, different hardware options and alternative reaction strategies in case of erratic extraction kicker occurrence. Based on these concepts, different solutions are evaluated and an optimized design for the FCC-hh extraction system is proposed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAF058
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAF059	Design and Evaluation of FCC-hh Injection Protection Schemes	854
	E. Renner, M.J. Barnes, W. Bartmann, C. Bracco, R. Bruce, F. Burkart, B. Goddard, A. Lechner, L.S. Stoel, F.M. Velotti, C. Wiesner, D. Woog CERN, Geneva, Switzerland
	The Future Circular Collider (FCC) study considers several injector scenarios for FCC-hh, the proposed 100~TeV centre of mass hadron collider located at CERN. The investigated options include amongst others to use the LHC at 3.3~TeV or a superconducting SPS at 1.3~TeV as a High Energy Booster (HEB). Due to the high energy of the injected proton beam and the short time constant of injection failures, a thorough consideration of potential failure cases is of major importance. Further attention has to be given to the fact that the injection is - as in LHC - located upstream of the side experiments. Failure scenarios are identified for both injector options, appropriate designs of injection protection schemes are proposed and first simulations are conducted to validate the protection efficiency.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAF059
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAF060	Injection and Dump Systems for a 13.5 TeV Hadron Synchrotron HE-LHC	858
	W. Bartmann, M.J. Barnes, L. Ducimetière, B. Goddard, M. Hofer, T. Kramer, A. Lechner, E. Renner, A. Sanz Ull, V. Senaj, L.S. Stoel, C. Wiesner CERN, Geneva, Switzerland
	One option for a future circular collider at CERN is to build a 13.5 TeV hadron synchrotron, or High Energy LHC (HE-LHC) in the LHC tunnel. Injection and dump systems will have to be upgraded to cope with the higher beam rigidity and increased damage potential of the beam. The required modifications of the beam transfer hardware are highlighted in view of technology advancements in the field of kicker switch technology. An optimised straight section optics is shown.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAF060
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Upgrade of the Dilution System for HL-LHC

261

C. Wiesner, W. Bartmann, C. Bracco, M. Calviani, E. Carlier, L. Ducimetière, M.I. Frankl, M.A. Fraser, S.S. Gilardoni, B. Goddard, T. Kramer, A. Lechner, N. Magnin, A. Perillo-Marcone, T. Polzin, E. Renner, V. Senaj
CERN, Geneva, Switzerland

The LHC Beam Dump System is one of the most critical systems for reliable and safe operation of the LHC. A dedicated dilution system is required to sweep the beam over the front face of the graphite dump core in order to reduce the deposited energy density. The High Luminosity Large Hadron Collider (HL-LHC) project foresees to increase the total beam intensity in the ring by nearly a factor of two, resulting in a correspondingly higher energy deposition in the dump core. In this paper, the beam sweep pattern and energy deposition for the case of normal dilution as well as for the relevant failure cases are presented. The implications as well as possible mitigations and upgrade measures for the dilution system, such as decreasing the pulse-generator voltage, adding two additional kickers, and implementing a retrigger system, are discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF062

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAF058

Optimization of the FCC-hh Beam Extraction System Regarding Failure Avoidance and Mitigation

850

E. Renner, M.J. Barnes, W. Bartmann, F. Burkart, E. Carlier, L. Ducimetière, B. Goddard, T. Kramer, A. Lechner, N. Magnin, V. Senaj, J.A. Uythoven, P. Van Trappen, C. Wiesner
CERN, Geneva, Switzerland

A core part of the Future Circular Collider (FCC) study is a high energy hadron-hadron collider with a circumference of nearly 100~km and a center of mass beam energy of 100~TeV. The energy stored in one beam at top energy is 8.3~GJ, more than 20 times that of the LHC beams. Due to the large damage potential of the FCC-hh beam, the design of the beam extraction system is dominated by machine protection considerations and the requirement of avoiding any material damage in case of an asynchronous beam dump. Erratic operation of one or more extraction kickers is a main contributor to asynchronous beam dumps. The presented study shows ways to reduce the probability and mitigate the impact of erratic kicker switching. Key proposals to achieve this include layout considerations, different hardware options and alternative reaction strategies in case of erratic extraction kicker occurrence. Based on these concepts, different solutions are evaluated and an optimized design for the FCC-hh extraction system is proposed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAF058

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAF059

Design and Evaluation of FCC-hh Injection Protection Schemes

854

E. Renner, M.J. Barnes, W. Bartmann, C. Bracco, R. Bruce, F. Burkart, B. Goddard, A. Lechner, L.S. Stoel, F.M. Velotti, C. Wiesner, D. Woog
CERN, Geneva, Switzerland

The Future Circular Collider (FCC) study considers several injector scenarios for FCC-hh, the proposed 100~TeV centre of mass hadron collider located at CERN. The investigated options include amongst others to use the LHC at 3.3~TeV or a superconducting SPS at 1.3~TeV as a High Energy Booster (HEB). Due to the high energy of the injected proton beam and the short time constant of injection failures, a thorough consideration of potential failure cases is of major importance. Further attention has to be given to the fact that the injection is - as in LHC - located upstream of the side experiments. Failure scenarios are identified for both injector options, appropriate designs of injection protection schemes are proposed and first simulations are conducted to validate the protection efficiency.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAF059

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAF060

Injection and Dump Systems for a 13.5 TeV Hadron Synchrotron HE-LHC

858

W. Bartmann, M.J. Barnes, L. Ducimetière, B. Goddard, M. Hofer, T. Kramer, A. Lechner, E. Renner, A. Sanz Ull, V. Senaj, L.S. Stoel, C. Wiesner
CERN, Geneva, Switzerland

One option for a future circular collider at CERN is to build a 13.5 TeV hadron synchrotron, or High Energy LHC (HE-LHC) in the LHC tunnel. Injection and dump systems will have to be upgraded to cope with the higher beam rigidity and increased damage potential of the beam. The required modifications of the beam transfer hardware are highlighted in view of technology advancements in the field of kicker switch technology. An optimised straight section optics is shown.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAF060

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)