IPAC2018 - List of Authors (Pretelli, M.P.)

Paper	Title	Page
WEPML034	Design and Commissioning of the RF System of the Collector Ring at FAIR	2765
	U. Laier, R. Balß, A. Dolinskyy, P. Hülsmann, H. Klingbeil, T. Winnefeld GSI, Darmstadt, Germany G. Blokesch, F. Wieschenberg Ampegon PPT GmbH, Dortmund, Germany K. Dunkel, M. Eisengruber, J.H. Hottenbacher RI Research Instruments GmbH, Bergisch Gladbach, Germany C. Morri, M.P. Pretelli, G.T. Taddia OCEM, Valsamoggia, Italy
	The Collector Ring (CR), a storage ring intended to perform efficient cooling of secondary beams, is under construction at GSI in the scope of the FAIR project. The RF system of the CR has to provide a frequency range from 1.1 to 1.5 MHz and pulsed gap voltages of up to 200 kVp (0.2 to 1 Hz, max. 10^-3 duty cycle) and up to 10 kVp in CW operation. Five identical RF stations will be built. Each RF station consists of an inductively loaded cavity, a tetrode based power amplifier, a semiconductor driver amplifier, a switch mode power supply and two digital feedback loops. The main components of the RF station are designed, built and commissioned in close collaboration between GSI and three companies: RI Research Instruments GmbH, Ampegon PPT GmbH and OCEM Energy Technology SRL. In 2016, the first of five RF stations has been integrated at GSI. In 2017 the system was successfully commissioned to demonstrate that all envisaged parameters have been achieved. This contribution will present the requirements imposed the system, the principal design of the overall system as well as of its key components, and the results of the commissioning of the first RF station.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPML034
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAL062	The New 20 kA 80 V Power Supply for the 520 MeV H⁻ Cyclotron at TRIUMF	3792
	S. Carrozza, L. Bondesan, A. Morato, M.P. Pretelli, G.T. Taddia OCEM, Valsamoggia, Italy M.C. Bastos, J.-P. Burnet, G. Hudson, Q. King, G. Le Godec, O. Michels CERN, Geneva, Switzerland Y. Bylinskii, A.C.M. Leung, W. L. Louie, F. Mammarella, R.B. Nussbaumer, C. Valencia TRIUMF, Vancouver, Canada
	The new 20 kA, 80 V power supply for the main magnet of the 520 MeV H⁻ Cyclotron at TRIUMF was awarded to OCEM. It has replaced the original system (commissioned in 1976) based on a series pass regulator. The final acceptance tests have demonstrated the com-pliance with the project specifications, especially for the high current stability required for the Cyclotron operation. The current stability is ±5 ppm, including current ripple, for a period of more than 8 hours of continuous operation. In addition, the magnetic field can be further stabilized us-ing feedback of a flux loop signal. OCEM designed the power supply to use the third gen-eration of Function Generator/Controller (FGC3) control electronics from CERN. This was chosen to obtain the high current stability required by TRIUMF. This collaboration was facilitated through a Knowledge Transfer agreement between CERN and OCEM. The power supply commis-sioning has been performed as a collaboration between OCEM, TRIUMF and CERN. This paper describes the topology of the power supply, the control electronics, the high-precision current measure-ment system and the associated software as well as the commissioning results carried out with the magnet.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL062
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Design and Commissioning of the RF System of the Collector Ring at FAIR

2765

U. Laier, R. Balß, A. Dolinskyy, P. Hülsmann, H. Klingbeil, T. Winnefeld
GSI, Darmstadt, Germany
G. Blokesch, F. Wieschenberg
Ampegon PPT GmbH, Dortmund, Germany
K. Dunkel, M. Eisengruber, J.H. Hottenbacher
RI Research Instruments GmbH, Bergisch Gladbach, Germany
C. Morri, M.P. Pretelli, G.T. Taddia
OCEM, Valsamoggia, Italy

The Collector Ring (CR), a storage ring intended to perform efficient cooling of secondary beams, is under construction at GSI in the scope of the FAIR project. The RF system of the CR has to provide a frequency range from 1.1 to 1.5 MHz and pulsed gap voltages of up to 200 kVp (0.2 to 1 Hz, max. 10^-3 duty cycle) and up to 10 kVp in CW operation. Five identical RF stations will be built. Each RF station consists of an inductively loaded cavity, a tetrode based power amplifier, a semiconductor driver amplifier, a switch mode power supply and two digital feedback loops. The main components of the RF station are designed, built and commissioned in close collaboration between GSI and three companies: RI Research Instruments GmbH, Ampegon PPT GmbH and OCEM Energy Technology SRL. In 2016, the first of five RF stations has been integrated at GSI. In 2017 the system was successfully commissioned to demonstrate that all envisaged parameters have been achieved. This contribution will present the requirements imposed the system, the principal design of the overall system as well as of its key components, and the results of the commissioning of the first RF station.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPML034

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAL062

The New 20 kA 80 V Power Supply for the 520 MeV H⁻ Cyclotron at TRIUMF

3792

S. Carrozza, L. Bondesan, A. Morato, M.P. Pretelli, G.T. Taddia
OCEM, Valsamoggia, Italy
M.C. Bastos, J.-P. Burnet, G. Hudson, Q. King, G. Le Godec, O. Michels
CERN, Geneva, Switzerland
Y. Bylinskii, A.C.M. Leung, W. L. Louie, F. Mammarella, R.B. Nussbaumer, C. Valencia
TRIUMF, Vancouver, Canada

The new 20 kA, 80 V power supply for the main magnet of the 520 MeV H⁻ Cyclotron at TRIUMF was awarded to OCEM. It has replaced the original system (commissioned in 1976) based on a series pass regulator. The final acceptance tests have demonstrated the com-pliance with the project specifications, especially for the high current stability required for the Cyclotron operation. The current stability is ±5 ppm, including current ripple, for a period of more than 8 hours of continuous operation. In addition, the magnetic field can be further stabilized us-ing feedback of a flux loop signal. OCEM designed the power supply to use the third gen-eration of Function Generator/Controller (FGC3) control electronics from CERN. This was chosen to obtain the high current stability required by TRIUMF. This collaboration was facilitated through a Knowledge Transfer agreement between CERN and OCEM. The power supply commis-sioning has been performed as a collaboration between OCEM, TRIUMF and CERN. This paper describes the topology of the power supply, the control electronics, the high-precision current measure-ment system and the associated software as well as the commissioning results carried out with the magnet.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL062

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)