IPAC2018 - List of Authors (Perron, T.P.)

Paper	Title	Page
THXGBD3	Status of the ESRF-Extremely Brilliant Source Project	2882
	J.-L. Revol, C. Benabderrahmane, P. Berkvens, J.C. Biasci, J-F. B. Bouteille, T. Brochard, N. Carmignani, J.M. Chaize, J. Chavanne, F. Cianciosi, A. D'Elia, R.D. Dimper, M. Dubrulle, D. Einfeld, F. Ewald, L. Eybert, G. Gautier, L. Goirand, L. Hardy, J. Jacob, B. Joly, M.L. Langlois, G. Le Bec, I. Leconte, S.M. Liuzzo, C. Maccarrone, T.R. Mairs, T. Marchial, H.P. Marques, D. Martin, J.M. Mercier, A. Meunier, M. Morati, J. Pasquaud, T.P. Perron, E. Plouviez, E. Rabeuf, P. Raimondi, P. Renaud, B. Roche, K.B. Scheidt, V. Serrière, P. Van Vaerenbergh, R. Versteegen, S.M. White ESRF, Grenoble, France
	The ESRF - the European Synchrotron Radiation Facility - is a user facility in Grenoble, France, and the source of intense high-energy (6 GeV) X-rays. In 2019, the existing storage ring will be removed and a new lattice will be installed in its place, dramatically reducing the equilibrium horizontal emittance. This 'fourth-generation' synchrotron will produce an X-ray beam 100 times more brilliant and coherent than the ESRF source today. The Extremely Brilliant Source (EBS) project was launched in 2015 and is now well underway, on track for its scheduled completion in 2020. The design is completed, the procurement in full swing, the assembly has started, and critical installation activities are being prepared. The current status, three years into the project, will be revealed, along with the expected performance of the accelerator and the technical challenges involved. This paper will focus on the implementation of the project.
	Slides THXGBD3 [13.547 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THXGBD3
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMF017	Operation Improvements and Emittance Reduction of the ESRF Booster	4077
	N. Carmignani, N. Benoist, J-F. B. Bouteille, M.G. Di Vito, F. Ewald, L. Farvacque, A. Franchi, O. Goudard, J.M. Koch, S. Lagarde, S.M. Liuzzo, B. Ogier, T.P. Perron, P. Raimondi, D. Robinson, F. Taoutaou, E.T. Taurel, P.V. Verdier, R. Versteegen, P. Vidal, S.M. White ESRF, Grenoble, France
	The ESRF storage ring will be replaced by the Extremely Brilliant Source (EBS) in 2020 and the equilibrium emittance will decrease from the present 4 nmrad to 134 pmrad. The current injector system, composed by a linac and a synchrotron booster, will be used to inject into the new storage ring. To increase the injection efficiency in the new storage ring, three methods to reduce the horizontal emittance of the booster have been considered and tested. This paper presents the studies and achievements in terms of operation improvements and emittance reduction.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF017
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMF019	ESRF-EBS Lattice Model with Canted Beamlines	4081
	S.M. Liuzzo, N. Carmignani, J. Chavanne, L. Farvacque, T.P. Perron, P. Raimondi, S.M. White ESRF, Grenoble, France
	The ESRF Extremely Brilliant Source (ESRF-EBS) lattice model is updated to include three canted beamlines. The cells are modified where necessary to include 3-Pole Wiggler (3PW), 2-Pole Wiggler (2PW) and Short Bending Magnet (SBM) sources. Several lattices are obtained for the different stages that will bring from commissioning to operation with users. A scheme for tune modification keeping key optics knobs unchanged is proposed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMF021	ESRF Operation Status	4088
	J.-L. Revol, J.C. Biasci, N. Carmignani, A. D'Elia, A. Franchi, L. Hardy, J. Jacob, I. Leconte, S.M. Liuzzo, H.P. Marques, T.P. Perron, E. Plouviez, P. Raimondi, B. Roche, K.B. Scheidt, L. Torino, S.M. White ESRF, Grenoble, France
	The European Synchrotron Radiation Facility (ESRF) is undergoing the second phase (2015-2022) of an Up-grade which concerns its infrastructure, beamlines and X-ray source. This paper reports on the present operational source performance, highlighting the most recent developments, and the preparation of the Extremely Brilliant Source project. The renovation of the injector and the recent operation in top-up mode are also detailed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Status of the ESRF-Extremely Brilliant Source Project

2882

J.-L. Revol, C. Benabderrahmane, P. Berkvens, J.C. Biasci, J-F. B. Bouteille, T. Brochard, N. Carmignani, J.M. Chaize, J. Chavanne, F. Cianciosi, A. D'Elia, R.D. Dimper, M. Dubrulle, D. Einfeld, F. Ewald, L. Eybert, G. Gautier, L. Goirand, L. Hardy, J. Jacob, B. Joly, M.L. Langlois, G. Le Bec, I. Leconte, S.M. Liuzzo, C. Maccarrone, T.R. Mairs, T. Marchial, H.P. Marques, D. Martin, J.M. Mercier, A. Meunier, M. Morati, J. Pasquaud, T.P. Perron, E. Plouviez, E. Rabeuf, P. Raimondi, P. Renaud, B. Roche, K.B. Scheidt, V. Serrière, P. Van Vaerenbergh, R. Versteegen, S.M. White
ESRF, Grenoble, France

The ESRF - the European Synchrotron Radiation Facility - is a user facility in Grenoble, France, and the source of intense high-energy (6 GeV) X-rays. In 2019, the existing storage ring will be removed and a new lattice will be installed in its place, dramatically reducing the equilibrium horizontal emittance. This 'fourth-generation' synchrotron will produce an X-ray beam 100 times more brilliant and coherent than the ESRF source today. The Extremely Brilliant Source (EBS) project was launched in 2015 and is now well underway, on track for its scheduled completion in 2020. The design is completed, the procurement in full swing, the assembly has started, and critical installation activities are being prepared. The current status, three years into the project, will be revealed, along with the expected performance of the accelerator and the technical challenges involved. This paper will focus on the implementation of the project.

Slides THXGBD3 [13.547 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THXGBD3

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMF017

Operation Improvements and Emittance Reduction of the ESRF Booster

4077

N. Carmignani, N. Benoist, J-F. B. Bouteille, M.G. Di Vito, F. Ewald, L. Farvacque, A. Franchi, O. Goudard, J.M. Koch, S. Lagarde, S.M. Liuzzo, B. Ogier, T.P. Perron, P. Raimondi, D. Robinson, F. Taoutaou, E.T. Taurel, P.V. Verdier, R. Versteegen, P. Vidal, S.M. White
ESRF, Grenoble, France

The ESRF storage ring will be replaced by the Extremely Brilliant Source (EBS) in 2020 and the equilibrium emittance will decrease from the present 4 nmrad to 134 pmrad. The current injector system, composed by a linac and a synchrotron booster, will be used to inject into the new storage ring. To increase the injection efficiency in the new storage ring, three methods to reduce the horizontal emittance of the booster have been considered and tested. This paper presents the studies and achievements in terms of operation improvements and emittance reduction.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF017

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMF019

ESRF-EBS Lattice Model with Canted Beamlines

4081

S.M. Liuzzo, N. Carmignani, J. Chavanne, L. Farvacque, T.P. Perron, P. Raimondi, S.M. White
ESRF, Grenoble, France

The ESRF Extremely Brilliant Source (ESRF-EBS) lattice model is updated to include three canted beamlines. The cells are modified where necessary to include 3-Pole Wiggler (3PW), 2-Pole Wiggler (2PW) and Short Bending Magnet (SBM) sources. Several lattices are obtained for the different stages that will bring from commissioning to operation with users. A scheme for tune modification keeping key optics knobs unchanged is proposed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMF021

ESRF Operation Status

4088

J.-L. Revol, J.C. Biasci, N. Carmignani, A. D'Elia, A. Franchi, L. Hardy, J. Jacob, I. Leconte, S.M. Liuzzo, H.P. Marques, T.P. Perron, E. Plouviez, P. Raimondi, B. Roche, K.B. Scheidt, L. Torino, S.M. White
ESRF, Grenoble, France

The European Synchrotron Radiation Facility (ESRF) is undergoing the second phase (2015-2022) of an Up-grade which concerns its infrastructure, beamlines and X-ray source. This paper reports on the present operational source performance, highlighting the most recent developments, and the preparation of the Extremely Brilliant Source project. The renovation of the injector and the recent operation in top-up mode are also detailed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)