Author: Middleman, K.J.
Paper Title Page
THPMK059 Commissioning of Front End of CLARA Facility at Daresbury Laboratory 4426
 
  • D. Angal-Kalinin, A.D. Brynes, R.K. Buckley, S.R. Buckley, J.A. Clarke, L.S. Cowie, K.D. Dumbell, D.J. Dunning, B.D. Fell, P. Goudket, A.R. Goulden, S.A. Griffiths, F. Jackson, S.P. Jamison, J.K. Jones, P.A. McIntosh, J.W. McKenzie, K.J. Middleman, B.L. Militsyn, A.J. Moss, B.D. Muratori, T.C.Q. Noakes, T.J. Price, M.D. Roper, Y.M. Saveliev, D.J. Scott, B.J.A. Shepherd, R.J. Smith, E.W. Snedden, N. Thompson, C. Tollervey, R. Valizadeh, D.A. Walsh, T.M. Weston, A.E. Wheelhouse, P.H. Williams
    STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
  • A.D. Brynes, J.A. Clarke, L.S. Cowie, K.D. Dumbell, D.J. Dunning, P. Goudket, F. Jackson, S.P. Jamison, J.K. Jones, P.A. McIntosh, J.W. McKenzie, K.J. Middleman, B.L. Militsyn, A.J. Moss, B.D. Muratori, Y.M. Saveliev, D.J. Scott, B.J.A. Shepherd, N. Thompson, R. Valizadeh, A.E. Wheelhouse, P.H. Williams
    Cockcroft Institute, Warrington, Cheshire, United Kingdom
  • R.J. Cash, R.F. Clarke, G. Cox, G.P. Diakun, A. Gallagher, K.D. Gleave, M.D. Hancock, J.P. Hindley, C. Hodgkinson, A. Oates, J.T.G. Wilson
    STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
  
  CLARA (Compact Linear Accelerator for Research and Applications) is a Free Electron Laser (FEL) test facility being developed at STFC Daresbury Laboratory. The principal aim of CLARA is to test advanced FEL schemes which can later be implemented on existing and future short wavelength FELs. The installation of the Front End (FE) section of CLARA, a S-bend merging with existing VELA (Versatile Electron Linear Accelerator) beam line and installation of a high repetition rate RF gun on VELA was completed in 2017. First beam commissioning results and high level software developments are presented in this paper.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK059  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPMK063 Photocathode Preparation and Characteristics of the Electron Source for the VELA/CLARA Facility 4442
 
  • T.C.Q. Noakes, D. Angal-Kalinin, L.S. Cowie, F. Jackson, J.W. McKenzie, K.J. Middleman, B.L. Militsyn, M.D. Roper, E.W. Snedden, R. Valizadeh, D.A. Walsh
    STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
  • D. Angal-Kalinin, L.S. Cowie, F. Jackson, J.W. McKenzie, K.J. Middleman, B.L. Militsyn, R. Valizadeh
    Cockcroft Institute, Warrington, Cheshire, United Kingdom
  
  The VELA and CLARA front end accelerators at Daresbury are test facilities with a focus on FEL research and industrial applications of electron beams. Recently the CLARA injector has been commissioned with acceleration of beam to 50 MeV. For several years a normal conducting 2.5 cell S-band cavity RF gun operated at up to 80 MV/m has been used as the electron source for both VELA and CLARA. For further beam acceleration an S-band travelling wave 2m long cavity has been used. The gun has used several different copper cathodes throughout its operational life, employing different preparation techniques. Oxygen plasma treatment is a well-known procedure for removing hydrocarbon contamination from surfaces whereas Argon plasma treatment also removes contaminants and typically leaves a thinner oxide at the surface. In this study we compare dark current (from field emission), as measured directly after the gun, for these alternate surface preparations and also present results from post-use electron microscopy analysis of the photocathodes. Electromagnetic simulations are used to help explain the results.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK063  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)