Author: Marx, D.
Paper Title Page
TUPMF086 Status of the ARES RF Gun at SINBAD: From its Characterization and Installation towards Commissioning 1474
 
  • B. Marchetti, R.W. Aßmann, S. Baark, F. Burkart, U. Dorda, K. Flöttmann, I. Hartl, J. Hauser, J. Herrmann, M. Hüning, K. Knebel, O. Krebs, G. Kube, W. Kuropka, S. Lederer, F. Lemery, F. Ludwig, D. Marx, F. Mayet, M. Pelzer, I. Peperkorn, F. Poblotzki, S. Pumpe, J. Rothenburg, H. Schlarb, M. Titberidze, G. Vashchenko, T. Vinatier, P.A. Walker, L. Winkelmann, K. Wittenburg, S. Yamin, J. Zhu
    DESY, Hamburg, Germany
  
  The SINBAD facility (Short and INnovative Bunches and Accelerators at DESY) is foreseen to host multiple experiments relating to the production of ultra-short electron bunches and novel high gradient acceleration techniques. The SINBAD-ARES linac will be a conventional S-band linear RF accelerator allowing the production of low charge (0.5 pC - tens pC) ultra-short electron bunches (FWHM length =< 1 fs - few fs) with 100 MeV energy. The installation of the linac will proceed in stages. In this paper we report on the status of the characterization of the ARES RF gun and the installations of the related infrastructure.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF086  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPAF050 Simulations of 3D Charge Density Measurements for Commissioning of the PolariX-TDS 1930
SUSPF104   use link to see paper's listing under its alternate paper code  
 
  • D. Marx, R.W. Aßmann, R.T.P. D'Arcy, B. Marchetti
    DESY, Hamburg, Germany
  
  The prototype of a novel X-band transverse deflection structure, the Polarizable X-band (PolariX) TDS*, is currently being prepared for installation in the FLASHForward beamline** at DESY in early 2019. This structure will have the novel feature of variable polarization of the deflecting mode, allowing bunches to be streaked at any transverse angle, rather than at just one angle as in a conventional cavity. By combining screen profiles from several streaking angles using tomographic reconstruction techniques, the full 3D charge density of a bunch can be obtained***. It is planned to perform this measurement for the first time during commissioning of the structure. In this paper, simulations of this measurement are presented and the effects of jitter are discussed.
*P Craievich et al. paper THPAL068, this conference
**A Aschikhin et al. Nucl. Instr. Meth. Phys. Res. A., vol.806, pp.175-183, 2018
***D Marx et al. J. Phys.: Conf. Ser., vol.874, p.012077, 2017 		 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAF050  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPAL068 Status of the Polarix-TDS Project 3808
 
  • P. Craievich, M. Bopp, H.-H. Braun, R. Ganter, T. Kleeb, M. Pedrozzi, E. Prat, S. Reiche, R. Zennaro
    PSI, Villigen PSI, Switzerland
  • R.W. Aßmann, F. Christie, R.T.P. D'Arcy, U. Dorda, M. Foese, P. González Caminal, M. Hoffmann, M. Hüning, R. Jonas, O. Krebs, S. Lederer, V. Libov, B. Marchetti, D. Marx, J. Osterhoff, F. Poblotzki, M. Reukauff, H. Schlarb, S. Schreiber, G. Tews, M. Vogt, A. Wagner
    DESY, Hamburg, Germany
  • N. Catalán Lasheras, A. Grudiev, G. McMonagle, W. Wuensch
    CERN, Geneva, Switzerland
  
  A collaboration between DESY, PSI and CERN has been established to develop and build an advanced modular X-band transverse deflection structure (TDS) system with the new feature of providing variable polarization of the deflecting force. This innovative CERN design requires very high manufacturing precision to guarantee highest azimuthal symmetry of the structure to avoid the deterioration of the polarization of the streaking field. Therefore, the high-precision tuning-free production process developed at PSI for the C-band and X-band accelerating structures will be used for the manufacturing. We summarize in this paper the status of the production of the prototype and the waveguide networks foreseen in the different facilities.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL068  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPML106 Electron Microscopy Inspired Setup for Single-Shot 4-D Trace Space Reconstruction of Bright Electron Beams 4909
 
  • J. Giner Navarro, D.B. Cesar, P. Musumeci
    UCLA, Los Angeles, California, USA
  • R.W. Aßmann, B. Marchetti, D. Marx
    DESY, Hamburg, Germany
  
  Funding: This work has been partially supported by the National Science Foundation under Grant No. 1549132 and Department of Energy under award No. DE-SC0009914.
In the development of low charge, single-shot diagnostics for high brightness electron beams, Transmission Electron Microscopy (TEM) grids present certain advantages compared to pepper pot masks due to higher beam transmission. In this paper, we developed a set of criteria to optimize the resolution of a point projection image. However, this configuration of the beam with respect to the grid and detector positions implies the measurement of a strongly correlated phase space which entails a large sensitivity to small measurement errors in retrieving the projected emittance. We discuss the possibility of an alternative scheme by inserting a magnetic focusing system in between the grid and the detector, similar to an electron microscope design, to reconstruct the phase space when the beam is focused on the grid. 		 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPML106  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)