IPAC2018 - List of Authors (Maesaka, H.)

Paper	Title	Page
WEXGBD2	Pulse-by-Pulse Multi-XFEL Beamline Operation with Ultra-Short Laser Pulses	1740
	T. Hara, T. Inagaki, H. Maesaka, Y. Otake, H. Tanaka, K. Togawa RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan K. Fukami JASRI/SPring-8, Hyogo-ken, Japan T. Hasegawa, O. Morimoto, S. Nakazawa, M. Yoshioka SES, Hyogo-pref., Japan H. Kawaguchi, Y. Kawaguchi Nichicon (Kusatsu) Corporation, Shiga, Japan C. Kondo JASRI, Hyogo, Japan
	The parallel operation of multiple beamlines is an important issue to expand the opportunity of user experiments for linac based FELs. At SACLA, the parallel operation of three beamlines, BL1~3, has been open to user experiments since September 2017. BL1 is a soft x-ray beamline driven by a dedicated accelerator, which is a former SCSS linac, and BL2 and 3 are XFEL beamlines, which share the electron beam from the SACLA main linac. In the parallel operation, a kicker magnet with 10 ppm stability (peak-to-peak) switches the two XFEL beamlines at 60 Hz from pulse to pulse. To ensure wide spectral tunability and optimize the laser performance, the energies and lengths of the electron bunches are independently adjusted for the two beamlines according to user experiments. Since the electron bunch of SACLA has typically 10~15 fs (FWHM) in length and its peak current exceeds 10 kA, the CSR effect at a dogleg beam transport to BL2 is quite significant. In order to suppress the CSR effects, an isochronous and achromatic lattice based on two DBA structures was introduced. In this talk, the multiple XFEL beamline operation and achieved laser performance are presented.
	Slides WEXGBD2 [9.708 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEXGBD2
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Pulse-by-Pulse Multi-XFEL Beamline Operation with Ultra-Short Laser Pulses

1740

T. Hara, T. Inagaki, H. Maesaka, Y. Otake, H. Tanaka, K. Togawa
RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan
K. Fukami
JASRI/SPring-8, Hyogo-ken, Japan
T. Hasegawa, O. Morimoto, S. Nakazawa, M. Yoshioka
SES, Hyogo-pref., Japan
H. Kawaguchi, Y. Kawaguchi
Nichicon (Kusatsu) Corporation, Shiga, Japan
C. Kondo
JASRI, Hyogo, Japan

The parallel operation of multiple beamlines is an important issue to expand the opportunity of user experiments for linac based FELs. At SACLA, the parallel operation of three beamlines, BL1~3, has been open to user experiments since September 2017. BL1 is a soft x-ray beamline driven by a dedicated accelerator, which is a former SCSS linac, and BL2 and 3 are XFEL beamlines, which share the electron beam from the SACLA main linac. In the parallel operation, a kicker magnet with 10 ppm stability (peak-to-peak) switches the two XFEL beamlines at 60 Hz from pulse to pulse. To ensure wide spectral tunability and optimize the laser performance, the energies and lengths of the electron bunches are independently adjusted for the two beamlines according to user experiments. Since the electron bunch of SACLA has typically 10~15 fs (FWHM) in length and its peak current exceeds 10 kA, the CSR effect at a dogleg beam transport to BL2 is quite significant. In order to suppress the CSR effects, an isochronous and achromatic lattice based on two DBA structures was introduced. In this talk, the multiple XFEL beamline operation and achieved laser performance are presented.

Slides WEXGBD2 [9.708 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEXGBD2

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)