Author: Ledda, W.
Paper Title Page
TUPAF064 Preparation Towards the Ess Linac Ion Source and Lebt Beam Commissioning on Ess Site 874
 
  • R. Miyamoto, M. Eshraqi, A. Jansson, E. Laface, Y. Levinsen, Ø. Midttun, N. Milas, M. Muñoz, D.C. Plostinar, A. Ponton, E. Sargsyan, L. Tchelidze
    ESS, Lund, Sweden
  • L. Celona, L. Neri
    INFN/LNS, Catania, Italy
  • W. Ledda
    Vitrociset s.p.a, Roma, Italy
  
  Beam commissioning of the proton linac of the European Spallation Source begin in summer, 2018, from the ion source (IS) and low energy beam transport (LEBT), and continues in stages until 2022, when the first beam is sent to its spallation target. This paper presents the plan, status, and highlights of preparation works for the upcoming IS and LEBT beam commissioning.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAF064  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPAF068 Functional Integration of the RFQ in the ESS Systems 890
 
  • J.S. Schmidt, E. Bargalló, T. Fay, G. Hulla, B. Lagoguez, R. Montaño, E. Sargsyan, S. Scolari, H. Spoelstra
    ESS, Lund, Sweden
  • A.C. Chauveau, M. Desmons, O. Piquet
    CEA/IRFU, Gif-sur-Yvette, France
  • A.J. Johansson
    Lund University, Lund, Sweden
  • W. Ledda
    Vitrociset s.p.a, Roma, Italy
  
  The 352 MHz Radio Frequency Quadrupole (RFQ) for the European Spallation Source ERIC (ESS) will be delivered during 2018. After delivery, installation and tuning of the cavity, the high power RF conditioning will be performed. At this point all the different systems that are needed to condition and operate the RFQ have to be in place and operational. This paper will give an overview of the system analysis that has been performed for the RFQ. The RFQ requirements for the RF system, including the RF distribution system (RFDS), the Low Level RF (LLRF) and the local RF protection system (RFLPS) will be presented. In addition, the paper covers the system integration of the structure in the ESS control and vacuum systems as well as the outcome of a machine protection analysis.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAF068  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPAF087 The First Experience and Results of Beam Diagnostics Deployment at the ESS Accelerator 2054
 
  • V. Grishin, E.C. Bergman, B. Cheymol, C.S. Derrez, T.J. Grandsaert, H. Hassanzadegan, A. Jansson, H. Kocevar, Ø. Midttun, S. Molloy, J. Norin, T.J. Shea, C.A. Thomas
    ESS, Lund, Sweden
  • W. Ledda
    Vitrociset s.p.a, Roma, Italy
  • F. Senée, O. Tuske
    CEA/IRFU, Gif-sur-Yvette, France
  
  The European Spallation Source (ESS) will produce neutrons for science by subjecting a tungsten target to the high-intensity proton beam from a superconducting linear accelerator. A complete suite of beam diagnostics will enable tuning, monitoring and protection of the accelerator during commissioning, studies and operation. As an initial step toward neutron production, the Ion Source and the 75 keV Low Energy Transport Line is installed on the ESS site in Lund, Sweden. To support the commissioning and characterization of this first beam-producing system, a subset of the full diagnostics suite is deployed. This includes the following equipment: a faraday cup, current transformers, an emittance measurement unit, beam-induced fluorescence monitors, and a doppler-shift spectroscopy system. All aspects of the deployment experience, from acceptance testing through installation, verification, and commissioning will be presented.
*Beam Instrumentation 		 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAF087  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)