IPAC2018 - List of Authors (Koettig, T.)

Paper	Title	Page
WEPMG006	Experimental Setup to Characterize the Radiation Hardness of Cryogenic Bypass Diodes for the HL-LHC Inner Triplet Circuits	2620
	A. Will, G. D'Angelo, R. Denz, M.F. Favre, D. Hagedorn, G. Kirby, T. Koettig, A. Monteuuis, F. Rodriguez-Mateos, A.P. Siemko, K. Stachon, M. Valette, A.P. Verweij, D. Wollmann CERN, Geneva, Switzerland A. Bernhard, A.-S. Müller KIT, Karlsruhe, Germany L. Kistrup KEA, Copenhagen, Denmark
	Funding: Work supported by the Wolfgang Gentner Programme of the German Federal Ministry of Education and Research For the high luminosity upgrade of the Large Hadron Collider (LHC), it is planned to replace the existing triplet quadrupole magnets with Nb₃Sn quadrupole magnets, which provide a comparable integrated field gradient with a significantly increased aperture. These magnets will be powered through a novel superconducting link based on MgB₂ cables. One option for the powering layout of this triplet circuit is the use of cryogenic bypass diodes, where the diodes are located inside an extension to the magnet cryostat and operated in superfluid helium. Hence, they are exposed to radiation. For this reason the radiation hardness of existing LHC type bypass diodes and more radiation tolerant prototype diodes needs to be tested up to the radiation doses expected at their planned position during their lifetime. A first irradiation test is planned in CERN's CHARM facility starting in spring 2018. Therefore, a cryo-cooler based cryostat to irradiate and test LHC type diodes in-situ has been designed and constructed. This paper will describe the properties of the sample diodes, the experimental roadmap and the setup installed in CHARM. Finally, the first measurement results will be discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPMG006
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPML044	Operation of a Cryogenic Current Comparator with Nanoampere Resolution for Continuous Beam Intensity Measurements in the Antiproton Decelerator at CERN	4741
	M.F. Fernandes, D. Alves, T. Koettig, A. Lees, J. Tan CERN, Geneva, Switzerland M.F. Fernandes, C.P. Welsch The University of Liverpool, Liverpool, United Kingdom M. Schwickert, T. Stöhlker GSI, Darmstadt, Germany T. Stöhlker IOQ, Jena, Germany C.P. Welsch Cockcroft Institute, Warrington, Cheshire, United Kingdom
	Funding: This project has received funding from the European Union's Seventh Framework Programme, under grant agreement number 289485. Low-intensity charged particle beams are particularly challenging for non-perturbative beam diagnostics due to the small amplitude of induced electromagnetic fields. The Antiproton Decelerator (AD) and Extra Low ENergy Antiproton (ELENA) rings at CERN decelerate beams containing 10⁷ antiprotons. An absolute intensity measurement of the circulating beam is essential to monitor the operational efficiency and to provide important calibration data for the antimatter experiments. This paper reviews the design of an operational Cryogenic Current Comparator (CCC) based on Superconducting QUantum Interference Device (SQUID) for current and intensity monitoring in the AD. Such a system has been operational throughout 2017, relying on a stand-alone cryogenic infrastructure based on a pulse-tube cryocooler. System performance is presented and correlated with different working environments, confirming a resolution in the nanoampere range.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPML044
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Experimental Setup to Characterize the Radiation Hardness of Cryogenic Bypass Diodes for the HL-LHC Inner Triplet Circuits

2620

A. Will, G. D'Angelo, R. Denz, M.F. Favre, D. Hagedorn, G. Kirby, T. Koettig, A. Monteuuis, F. Rodriguez-Mateos, A.P. Siemko, K. Stachon, M. Valette, A.P. Verweij, D. Wollmann
CERN, Geneva, Switzerland
A. Bernhard, A.-S. Müller
KIT, Karlsruhe, Germany
L. Kistrup
KEA, Copenhagen, Denmark

Funding: Work supported by the Wolfgang Gentner Programme of the German Federal Ministry of Education and Research
For the high luminosity upgrade of the Large Hadron Collider (LHC), it is planned to replace the existing triplet quadrupole magnets with Nb₃Sn quadrupole magnets, which provide a comparable integrated field gradient with a significantly increased aperture. These magnets will be powered through a novel superconducting link based on MgB₂ cables. One option for the powering layout of this triplet circuit is the use of cryogenic bypass diodes, where the diodes are located inside an extension to the magnet cryostat and operated in superfluid helium. Hence, they are exposed to radiation. For this reason the radiation hardness of existing LHC type bypass diodes and more radiation tolerant prototype diodes needs to be tested up to the radiation doses expected at their planned position during their lifetime. A first irradiation test is planned in CERN's CHARM facility starting in spring 2018. Therefore, a cryo-cooler based cryostat to irradiate and test LHC type diodes in-situ has been designed and constructed. This paper will describe the properties of the sample diodes, the experimental roadmap and the setup installed in CHARM. Finally, the first measurement results will be discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPMG006

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPML044

Operation of a Cryogenic Current Comparator with Nanoampere Resolution for Continuous Beam Intensity Measurements in the Antiproton Decelerator at CERN

4741

M.F. Fernandes, D. Alves, T. Koettig, A. Lees, J. Tan
CERN, Geneva, Switzerland
M.F. Fernandes, C.P. Welsch
The University of Liverpool, Liverpool, United Kingdom
M. Schwickert, T. Stöhlker
GSI, Darmstadt, Germany
T. Stöhlker
IOQ, Jena, Germany
C.P. Welsch
Cockcroft Institute, Warrington, Cheshire, United Kingdom

Funding: This project has received funding from the European Union's Seventh Framework Programme, under grant agreement number 289485.
Low-intensity charged particle beams are particularly challenging for non-perturbative beam diagnostics due to the small amplitude of induced electromagnetic fields. The Antiproton Decelerator (AD) and Extra Low ENergy Antiproton (ELENA) rings at CERN decelerate beams containing 10⁷ antiprotons. An absolute intensity measurement of the circulating beam is essential to monitor the operational efficiency and to provide important calibration data for the antimatter experiments. This paper reviews the design of an operational Cryogenic Current Comparator (CCC) based on Superconducting QUantum Interference Device (SQUID) for current and intensity monitoring in the AD. Such a system has been operational throughout 2017, relying on a stand-alone cryogenic infrastructure based on a pulse-tube cryocooler. System performance is presented and correlated with different working environments, confirming a resolution in the nanoampere range.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPML044

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)