IPAC2018 - List of Authors (Iida, N.)

Paper	Title	Page
MOPMF034	Layout and Performance of the FCC-ee Pre-Injector Chain	169
	S. Ogur, T.K. Charles, K. Oide, Y. Papaphilippou, L. Rinolfi, F. Zimmermann CERN, Geneva, Switzerland A.M. Barnyakov, A.E. Levichev, P.V. Martyshkin, D.A. Nikiforov BINP SB RAS, Novosibirsk, Russia I. Chaikovska, R. Chehab LAL, Orsay, France K. Furukawa, N. Iida, T. Kamitani, F. Miyahara KEK, Ibaraki, Japan E.V. Ozcan Bogazici University, Bebek / Istanbul, Turkey S.M. Polozov MEPhI, Moscow, Russia
	The Future Circular e⁺e⁻ Collider pre-injector chain consists of a 6 GeV S-Band linac, a damping ring at 1.54 GeV and pre-booster ring to reach 20 GeV for injection to the main booster. The electron and positron beams use the same accelerator chain alternatively. The e⁺ beam is generated from a novel low level RF-gun providing 6.5 nC charge at 11 MeV with 0.5 micron geometric emittance. The e⁺ beam is produced by the impact of a 4.46 GeV e^- beam onto a hybrid target, accelerated in the linac up to 1.54 GeV, and injected to the damping ring for emittance cooling. Simulations on the performance of the DR are presented for reaching the required equilibrium emittances at the required damping time. As an alternative option, a 20 GeV linac is considered utilising C-Band cavities and simulations studies have been undertaken regarding the beam transport and transmission efficiency up to that energy.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF034
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF073	Rejuvenation of 7-Gev SuperKEKB Injector Linac	300
	K. Furukawa, M. Akemoto, D.A. Arakawa, Y. Arakida, H. Ego, A. Enomoto, Y. Enomoto, T. Higo, H. Honma, N. Iida, M. Ikeda, H. Kaji, K. Kakihara, T. Kamitani, H. Katagiri, M. Kawamura, M. Kurashina, S. Matsumoto, T. Matsumoto, H. Matsushita, S. Michizono, K. Mikawa, T. Miura, F. Miyahara, H. Nakajima, K. Nakao, T. Natsui, M. Nishida, Y. Ogawa, Y. Ohnishi, S. Ohsawa, F. Qiu, I. Satake, M. Satoh, Y. Seimiya, A. Shirakawa, H. Sugimura, T. Suwada, T. Takenaka, M. Tanaka, N. Toge, Y. Yano, K. Yokoyama, M. Yoshida, R. Zhang, X. Zhou KEK, Ibaraki, Japan
	KEK injector linac has delivered electrons and positrons for particle physics and photon science experiments for more than 30 years. It was upgraded for the SuperKEKB project, which aims at a 40-fold increase in luminosity over the previous project KEKB, in order to increase our understanding of flavor physics beyond the standard model of elementary particle physics. SuperKEKB energy-asymmetric electron-positron collider with its extremely high luminosity requires a high current, low emittance and low energy spread injection beam from the injector. The electron beam is generated by a new type of RF gun, that provides a much higher beam current to correspond to a large stored beam current and a short lifetime in the ring. The positron source is another major challenge that enhances the positron bunch intensity from 1 to 4 nC by increasing the positron capture efficiency, and the positron beam emittance is reduced from 2000 μm to 10 μm in the vertical plane by introducing a damping ring, followed by the bunch compressor and energy compressor. The summary of the rejuvenation is reported.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF073
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF074	Beam Phase Space Jitter and Effective Emittance for SuperKEKB Injector Linac	304
	Y. Seimiya, N. Iida, T. Kamitani, M. Satoh KEK, Ibaraki, Japan
	In SuperKEKB linac, stable high charged low emittance beam is necessary. Transported beam to SuperKEKB Main Ring (MR) must be stable to the extent that the beam can be injected inside MR acceptance. SuperKEKB requirement must be satisfied for emittance including beam phase space jitter, called as effective emittance. Large amplitude beam position jitter has been measured at linac end. We evaluated that the effect of the beam position jitter on effective emittance and investigated the source of the beam phase space jitter.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF074
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Layout and Performance of the FCC-ee Pre-Injector Chain

169

S. Ogur, T.K. Charles, K. Oide, Y. Papaphilippou, L. Rinolfi, F. Zimmermann
CERN, Geneva, Switzerland
A.M. Barnyakov, A.E. Levichev, P.V. Martyshkin, D.A. Nikiforov
BINP SB RAS, Novosibirsk, Russia
I. Chaikovska, R. Chehab
LAL, Orsay, France
K. Furukawa, N. Iida, T. Kamitani, F. Miyahara
KEK, Ibaraki, Japan
E.V. Ozcan
Bogazici University, Bebek / Istanbul, Turkey
S.M. Polozov
MEPhI, Moscow, Russia

The Future Circular e⁺e⁻ Collider pre-injector chain consists of a 6 GeV S-Band linac, a damping ring at 1.54 GeV and pre-booster ring to reach 20 GeV for injection to the main booster. The electron and positron beams use the same accelerator chain alternatively. The e⁺ beam is generated from a novel low level RF-gun providing 6.5 nC charge at 11 MeV with 0.5 micron geometric emittance. The e⁺ beam is produced by the impact of a 4.46 GeV e^- beam onto a hybrid target, accelerated in the linac up to 1.54 GeV, and injected to the damping ring for emittance cooling. Simulations on the performance of the DR are presented for reaching the required equilibrium emittances at the required damping time. As an alternative option, a 20 GeV linac is considered utilising C-Band cavities and simulations studies have been undertaken regarding the beam transport and transmission efficiency up to that energy.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF034

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF073

Rejuvenation of 7-Gev SuperKEKB Injector Linac

300

K. Furukawa, M. Akemoto, D.A. Arakawa, Y. Arakida, H. Ego, A. Enomoto, Y. Enomoto, T. Higo, H. Honma, N. Iida, M. Ikeda, H. Kaji, K. Kakihara, T. Kamitani, H. Katagiri, M. Kawamura, M. Kurashina, S. Matsumoto, T. Matsumoto, H. Matsushita, S. Michizono, K. Mikawa, T. Miura, F. Miyahara, H. Nakajima, K. Nakao, T. Natsui, M. Nishida, Y. Ogawa, Y. Ohnishi, S. Ohsawa, F. Qiu, I. Satake, M. Satoh, Y. Seimiya, A. Shirakawa, H. Sugimura, T. Suwada, T. Takenaka, M. Tanaka, N. Toge, Y. Yano, K. Yokoyama, M. Yoshida, R. Zhang, X. Zhou
KEK, Ibaraki, Japan

KEK injector linac has delivered electrons and positrons for particle physics and photon science experiments for more than 30 years. It was upgraded for the SuperKEKB project, which aims at a 40-fold increase in luminosity over the previous project KEKB, in order to increase our understanding of flavor physics beyond the standard model of elementary particle physics. SuperKEKB energy-asymmetric electron-positron collider with its extremely high luminosity requires a high current, low emittance and low energy spread injection beam from the injector. The electron beam is generated by a new type of RF gun, that provides a much higher beam current to correspond to a large stored beam current and a short lifetime in the ring. The positron source is another major challenge that enhances the positron bunch intensity from 1 to 4 nC by increasing the positron capture efficiency, and the positron beam emittance is reduced from 2000 μm to 10 μm in the vertical plane by introducing a damping ring, followed by the bunch compressor and energy compressor. The summary of the rejuvenation is reported.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF073

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF074

Beam Phase Space Jitter and Effective Emittance for SuperKEKB Injector Linac

304

Y. Seimiya, N. Iida, T. Kamitani, M. Satoh
KEK, Ibaraki, Japan

In SuperKEKB linac, stable high charged low emittance beam is necessary. Transported beam to SuperKEKB Main Ring (MR) must be stable to the extent that the beam can be injected inside MR acceptance. SuperKEKB requirement must be satisfied for emittance including beam phase space jitter, called as effective emittance. Large amplitude beam position jitter has been measured at linac end. We evaluated that the effect of the beam position jitter on effective emittance and investigated the source of the beam phase space jitter.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF074

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)