IPAC2018 - List of Authors (Holzer, E.B.)

Paper	Title	Page
MOPMF053	Observations, Analysis and Mitigation of Recurrent LHC Beam Dumps Caused by Fast Losses in Arc Half-Cell 16L2	228
	J.M. Jimenez, D. Amorim, S. A. Antipov, G. Arduini, A. Bertarelli, N. Biancacci, B. Bradu, E. Bravin, G. Bregliozzi, K. Brodzinski, R. Bruce, X. Buffat, L.R. Carver, P. Chiggiato, S.D. Claudet, P. Collier, R. Garcia Alia, M. Giovannozzi, L. K. Grob, E.B. Holzer, W. Höfle, G. Iadarola, G. Kotzian, A. Lechner, T.E. Levens, B. Lindstrom, T. Medvedeva, A. Milanese, D. Mirarchi, E. Métral, D. Perini, S. Redaelli, G. Rumolo, B. Salvant, R. Schmidt, M. Valette, D. Valuch, J. Wenninger, D. Wollmann, C. Yin Vallgren, C. Zamantzas, M. Zerlauth CERN, Geneva, Switzerland D. Amorim Université Grenoble Alpes, Grenoble, France A.A. Gorzawski University of Manchester, Manchester, United Kingdom L. Mether EPFL, Lausanne, Switzerland
	Recurrent beam dumps significantly perturbed the operation of the CERN LHC in the summer months of 2017, especially in August. These unexpected beam dumps were triggered by fast beam losses that built up in the cryogenic beam vacuum at the half-cell 16 left of LHC-IP2 and were detected either at that location but mainly in the collimation insertions. This contribution details the experimental observables (beam losses, coherent instabilities, heat load to cryogenic system, vacuum signals), the extent of the understanding of the beam loss and instability mechanisms and the mitigation steps and new settings that allowed recovering the luminosity performance of the LHC for the rest of the Run.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF053
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAF040	Beam Loss Measurements for Recurring Fast Loss Events During 2017 LHC Operation Possibly Caused by Macroparticles	780
	A. Lechner, B. Auchmann, E. Bravin, A.A. Gorzawski, L. K. Grob, E.B. Holzer, B. Lindstrom, T. Medvedeva, D. Mirarchi, R. Schmidt, M. Valette, D. Wollmann CERN, Geneva, Switzerland
	The availability of the LHC machine was adversely affected in 2017 by tens of beam aborts provoked by frequent loss events in one standard arc cell (16L2). In most of the cases, the dumps were triggered by concurrently developing fast beam instabilities leading to particle losses in the betatron cleaning insertion. Many of the events started with a distinct sub-millisecond loss peak comparable to regular dust particle events, which have been observed along all the LHC since the start-up. In contrast to regular dust events, persistent losses developed in cell 16L2 after the initial peaks which can possibly be explained by a phase transition of macroparticles to the gas phase. In this paper, we summarize the observed loss characteristics such as spatial loss pattern and time profiles measured by Beam Loss Monitors (ionization chambers). Based on the measurements, we estimate the energy deposition in macroparticles and reconstruct proton loss rates as well as the gas densities after the phase transition. Differences between regular dust events and events in 16L2 are highlighted and the ability to induce magnet quenches is discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAF040
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAF049	Analysis of Loss Signatures of Unidentified Falling Objects in the LHC	814
	L. K. Grob, M. Dziadosz, E.B. Holzer, A. Lechner, B. Lindstrom, R. Schmidt, D. Wollmann, C. Zamantzas CERN, Geneva, Switzerland
	Particulates in the LHC beam pipes can interact with the proton beams and cause significant beam losses. The "UFOs" (unidentified falling objects) hypothesis describes a particle falling into the beam, creating particle showers, being ionized and repelled. Though the signals of the beam loss monitors support this, many aspects remain unknown. Neither the source of the dust nor the release mechanism from the beam pipe are understood. The same holds for the forces involved in the interaction and the observed UFO rate reduction over the years. These open questions are approached from different angles. Firstly, a new data analysis tool was established featuring advanced raw data selection and statistical analysis. Results of this analysis will be presented. Secondly, dust samples were extracted from LHC components and analyzed to gain insight into the size distribution and material composition of the contamination. The performed observations and analysis lead to a better modelling of the UFO events and helped to understand the physics involved. The validated UFO models will be crucial in view of the high luminosity upgrade of the LHC (HL-LHC) and the Future Circular Collider (FCC).
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAF049
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THYGBD2	Results of UFO Dynamics Studies with Beam in the LHC	2914
	B. Lindstrom, A. Apollonio, P. Bélanger, M. Dziadosz, A.A. Gorzawski, L. K. Grob, E.B. Holzer, A. Lechner, R. Schmidt, M. Valette, D. Valuch, D. Wollmann CERN, Geneva, Switzerland
	Micrometer sized particles entering the LHC beam (the so-called Unidentified Falling Objects or UFOs) are a known cause of localized beam losses since the beginning of high intensity beam operation, however the origin of these particles is not fully known. Their effect limits LHC availability by causing premature dumps due to excessive beam losses and occasionally even magnet quenches. This could become an important limitation for future accelerators such as the High Luminosity upgrade of the LHC (HL-LHC) and the Future Circular Collider (FCC). The dynamics of these UFOs was investigated in two dedicated experiments. In the first experiment, it was shown that the transverse movements of these particles can be studied by observing bunch-by-bunch losses from bunches with different horizontal and vertical emittances. In the second experiment, UFO-like events around the 16L2 interconnect in the LHC, which has seen intense UFO activity in 2017, were studied with the above method. This paper summarizes the results of both experiments.
	Slides THYGBD2 [1.357 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THYGBD2
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPML090	Optical Beam Loss Monitors Based on Fibres for the CLARA Phase 1 Beam-Line	4869
	A.S. Alexandrova, L.J. Devlin, V. Tzoganis, C.P. Welsch The University of Liverpool, Liverpool, United Kingdom A.D. Brynes, F. Jackson STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom A.D. Brynes, F. Jackson, V. Tzoganis, C.P. Welsch Cockcroft Institute, Warrington, Cheshire, United Kingdom E. Effinger, E.B. Holzer CERN, Geneva, Switzerland
	Funding: Work supported by STFC Cockcroft Institute core Grant No. ST/G008248/1 Fibre based Optical Beam Loss Monitors (oBLMs) are on-line devices used in-situ to measure losses along a beam-line. The technology is based on the detection of Cherenkov radiation, produced inside quartz fibres placed alongside the beampipe, from the interaction of secondary showers generated from losses hitting the vacuum pipe. This contribution presents ongoing developments of an oBLM system installed along the Compact Linear Accelerator for Research and Applications (CLARA). The oBLM system consists of 4 channels which allows for sub-metre loss resolution with two dimensional coverage along the entirety of the beam line, as opposed to conventional localised BLM systems. The system was first commissioned to measure dark current from the injector. The ability of the system to locate longitudinal positions of known beam loss locations has also been measured and has shown excellent agreement. We present measurements acquired from the detector during regular operation and during dedicated beam tests. We also discuss the incorporation of the monitor into the accelerator diagnostics system and its use in assisting accelerator characterisation and performance.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPML090
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Observations, Analysis and Mitigation of Recurrent LHC Beam Dumps Caused by Fast Losses in Arc Half-Cell 16L2

228

J.M. Jimenez, D. Amorim, S. A. Antipov, G. Arduini, A. Bertarelli, N. Biancacci, B. Bradu, E. Bravin, G. Bregliozzi, K. Brodzinski, R. Bruce, X. Buffat, L.R. Carver, P. Chiggiato, S.D. Claudet, P. Collier, R. Garcia Alia, M. Giovannozzi, L. K. Grob, E.B. Holzer, W. Höfle, G. Iadarola, G. Kotzian, A. Lechner, T.E. Levens, B. Lindstrom, T. Medvedeva, A. Milanese, D. Mirarchi, E. Métral, D. Perini, S. Redaelli, G. Rumolo, B. Salvant, R. Schmidt, M. Valette, D. Valuch, J. Wenninger, D. Wollmann, C. Yin Vallgren, C. Zamantzas, M. Zerlauth
CERN, Geneva, Switzerland
D. Amorim
Université Grenoble Alpes, Grenoble, France
A.A. Gorzawski
University of Manchester, Manchester, United Kingdom
L. Mether
EPFL, Lausanne, Switzerland

Recurrent beam dumps significantly perturbed the operation of the CERN LHC in the summer months of 2017, especially in August. These unexpected beam dumps were triggered by fast beam losses that built up in the cryogenic beam vacuum at the half-cell 16 left of LHC-IP2 and were detected either at that location but mainly in the collimation insertions. This contribution details the experimental observables (beam losses, coherent instabilities, heat load to cryogenic system, vacuum signals), the extent of the understanding of the beam loss and instability mechanisms and the mitigation steps and new settings that allowed recovering the luminosity performance of the LHC for the rest of the Run.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF053

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAF040

Beam Loss Measurements for Recurring Fast Loss Events During 2017 LHC Operation Possibly Caused by Macroparticles

780

A. Lechner, B. Auchmann, E. Bravin, A.A. Gorzawski, L. K. Grob, E.B. Holzer, B. Lindstrom, T. Medvedeva, D. Mirarchi, R. Schmidt, M. Valette, D. Wollmann
CERN, Geneva, Switzerland

The availability of the LHC machine was adversely affected in 2017 by tens of beam aborts provoked by frequent loss events in one standard arc cell (16L2). In most of the cases, the dumps were triggered by concurrently developing fast beam instabilities leading to particle losses in the betatron cleaning insertion. Many of the events started with a distinct sub-millisecond loss peak comparable to regular dust particle events, which have been observed along all the LHC since the start-up. In contrast to regular dust events, persistent losses developed in cell 16L2 after the initial peaks which can possibly be explained by a phase transition of macroparticles to the gas phase. In this paper, we summarize the observed loss characteristics such as spatial loss pattern and time profiles measured by Beam Loss Monitors (ionization chambers). Based on the measurements, we estimate the energy deposition in macroparticles and reconstruct proton loss rates as well as the gas densities after the phase transition. Differences between regular dust events and events in 16L2 are highlighted and the ability to induce magnet quenches is discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAF040

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAF049

Analysis of Loss Signatures of Unidentified Falling Objects in the LHC

814

L. K. Grob, M. Dziadosz, E.B. Holzer, A. Lechner, B. Lindstrom, R. Schmidt, D. Wollmann, C. Zamantzas
CERN, Geneva, Switzerland

Particulates in the LHC beam pipes can interact with the proton beams and cause significant beam losses. The "UFOs" (unidentified falling objects) hypothesis describes a particle falling into the beam, creating particle showers, being ionized and repelled. Though the signals of the beam loss monitors support this, many aspects remain unknown. Neither the source of the dust nor the release mechanism from the beam pipe are understood. The same holds for the forces involved in the interaction and the observed UFO rate reduction over the years. These open questions are approached from different angles. Firstly, a new data analysis tool was established featuring advanced raw data selection and statistical analysis. Results of this analysis will be presented. Secondly, dust samples were extracted from LHC components and analyzed to gain insight into the size distribution and material composition of the contamination. The performed observations and analysis lead to a better modelling of the UFO events and helped to understand the physics involved. The validated UFO models will be crucial in view of the high luminosity upgrade of the LHC (HL-LHC) and the Future Circular Collider (FCC).

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAF049

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THYGBD2

Results of UFO Dynamics Studies with Beam in the LHC

2914

B. Lindstrom, A. Apollonio, P. Bélanger, M. Dziadosz, A.A. Gorzawski, L. K. Grob, E.B. Holzer, A. Lechner, R. Schmidt, M. Valette, D. Valuch, D. Wollmann
CERN, Geneva, Switzerland

Micrometer sized particles entering the LHC beam (the so-called Unidentified Falling Objects or UFOs) are a known cause of localized beam losses since the beginning of high intensity beam operation, however the origin of these particles is not fully known. Their effect limits LHC availability by causing premature dumps due to excessive beam losses and occasionally even magnet quenches. This could become an important limitation for future accelerators such as the High Luminosity upgrade of the LHC (HL-LHC) and the Future Circular Collider (FCC). The dynamics of these UFOs was investigated in two dedicated experiments. In the first experiment, it was shown that the transverse movements of these particles can be studied by observing bunch-by-bunch losses from bunches with different horizontal and vertical emittances. In the second experiment, UFO-like events around the 16L2 interconnect in the LHC, which has seen intense UFO activity in 2017, were studied with the above method. This paper summarizes the results of both experiments.

Slides THYGBD2 [1.357 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THYGBD2

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPML090

Optical Beam Loss Monitors Based on Fibres for the CLARA Phase 1 Beam-Line

4869

A.S. Alexandrova, L.J. Devlin, V. Tzoganis, C.P. Welsch
The University of Liverpool, Liverpool, United Kingdom
A.D. Brynes, F. Jackson
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
A.D. Brynes, F. Jackson, V. Tzoganis, C.P. Welsch
Cockcroft Institute, Warrington, Cheshire, United Kingdom
E. Effinger, E.B. Holzer
CERN, Geneva, Switzerland

Funding: Work supported by STFC Cockcroft Institute core Grant No. ST/G008248/1
Fibre based Optical Beam Loss Monitors (oBLMs) are on-line devices used in-situ to measure losses along a beam-line. The technology is based on the detection of Cherenkov radiation, produced inside quartz fibres placed alongside the beampipe, from the interaction of secondary showers generated from losses hitting the vacuum pipe. This contribution presents ongoing developments of an oBLM system installed along the Compact Linear Accelerator for Research and Applications (CLARA). The oBLM system consists of 4 channels which allows for sub-metre loss resolution with two dimensional coverage along the entirety of the beam line, as opposed to conventional localised BLM systems. The system was first commissioned to measure dark current from the injector. The ability of the system to locate longitudinal positions of known beam loss locations has also been measured and has shown excellent agreement. We present measurements acquired from the detector during regular operation and during dedicated beam tests. We also discuss the incorporation of the monitor into the accelerator diagnostics system and its use in assisting accelerator characterisation and performance.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPML090

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)