IPAC2018 - List of Authors (Hofer, M.)

Paper	Title	Page
MOPMF064	High-Energy LHC Design	269
	F. Zimmermann, D. Amorim, S. A. Antipov, S. Arsenyev, M. Benedikt, R. Bruce, M.P. Crouch, S.D. Fartoukh, M. Giovannozzi, B. Goddard, M. Hofer, R. Kersevan, V. Mertens, Y. Muttoni, J.A. Osborne, V. Parma, V. Raginel, S. Redaelli, T. Risselada, I. Ruehl, B. Salvant, D. Schoerling, E.N. Shaposhnikova, L.J. Tavian, E. Todesco, R. Tomás, D. Tommasini, F. Valchkova-Georgieva, V. Venturi, D. Wollmann CERN, Geneva, Switzerland J.L. Abelleira, E. Cruz Alaniz, P. Martinez Mirave, A. Seryi, L. van Riesen-Haupt JAI, Oxford, United Kingdom A. Apyan ANSL, Yerevan, Armenia J. Barranco García, L. Mether, T. Pieloni, L. Rivkin, C. Tambasco EPFL, Lausanne, Switzerland F. Burkart DESY, Hamburg, Germany Y. Cai, Y.M. Nosochkov SLAC, Menlo Park, California, USA G. Guillermo Cantón CINVESTAV, Mérida, Mexico K. Ohmi, K. Oide, D. Zhou KEK, Ibaraki, Japan
	In the frame of the FCC study we are designing a 27 TeV hadron collider in the LHC tunnel, called the High Energy LHC (HE-LHC).
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF064
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF067	Optimized Arc Optics for the HE-LHC	277
	Y.M. Nosochkov, Y. Cai SLAC, Menlo Park, California, USA M.P. Crouch, M. Giovannozzi, M. Hofer, J. Keintzel, T. Risselada, E. Todesco, R. Tomás, F. Zimmermann CERN, Geneva, Switzerland D. Zhou KEK, Ibaraki, Japan L. van Riesen-Haupt JAI, Oxford, United Kingdom
	Funding: Work supported by the European Commission under Capacities 7th Framework Programme project EuCARD-2, grant agreement 312453, and the HORIZON 2020 project EuroCirCol, grant agreement 654305. The High Energy LHC (HE-LHC) proton-proton collider is a proposed replacement of the LHC in the existing 27-km tunnel, with the goal of reaching the centre-of-mass beam energy of 27 TeV. The required higher dipole field can be realized by using 16-T dipoles being developed for the FCC-hh design. A major concern is the dynamic aperture at injection energy due to degraded field quality of the new dipole based on Nb3Sn superconductor, the potentially large energy swing between injection and collision, and the slightly reduced magnet aperture. Another issue is the field in quadrupoles and sextupoles at top energy, for which it may be cost-effective, wherever possible, to stay with Nb-Ti technology. In this study, we explore design options differed by arc lattice, for three choices of injection energy, with the goal of attaining acceptable magnet field and maximum injection dynamic aperture with dipole non-linear field errors.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF067
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMK001	Optics for RF Acceleration Section for the High Energy Large Hadron Collider	345
	L. van Riesen-Haupt, J.L. Abelleira University of Oxford, Oxford, United Kingdom J.L. Abelleira, E. Cruz Alaniz, P. Martinez Mirave, A. Seryi JAI, Oxford, United Kingdom M. Hofer, F. Zimmermann CERN, Geneva, Switzerland D. Zhou KEK, Ibaraki, Japan
	Funding: Work supported by the Horizon 2020 project EuroCirCol, grant 654305 and by the Science and Technology Facilities Council As part of the FCC study, the design of the High Energy LHC (HE-LHC) is addressed. A proposed layout for the interaction region for the containing the radio frequency (RF) cavities and various beam instrumentation will be discussed. The higher energy requires more RF cavities, which strongly restricts the space available for optics and instrumentation. Another challenge arises because the beam rigidity increases whilst the LHC geometry has to be conserved. To this end, next generation dipoles have to be used in order to achieve sufficient beam to beam separation. A design that provides enough beam stay clear (BSC) in all the magnets will be presented. The design introduces an additional quadrupole on either side of the RF region to be used for phase advance adjustments that can increase the dynamic aperture.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMK001
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAF060	Injection and Dump Systems for a 13.5 TeV Hadron Synchrotron HE-LHC	858
	W. Bartmann, M.J. Barnes, L. Ducimetière, B. Goddard, M. Hofer, T. Kramer, A. Lechner, E. Renner, A. Sanz Ull, V. Senaj, L.S. Stoel, C. Wiesner CERN, Geneva, Switzerland
	One option for a future circular collider at CERN is to build a 13.5 TeV hadron synchrotron, or High Energy LHC (HE-LHC) in the LHC tunnel. Injection and dump systems will have to be upgraded to cope with the higher beam rigidity and increased damage potential of the beam. The required modifications of the beam transfer hardware are highlighted in view of technology advancements in the field of kicker switch technology. An optimised straight section optics is shown.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAF060
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMK002	Integrated Full HE-LHC Optics and Its Performance	348
	M. Hofer TU Vienna, Wien, Austria M.P. Crouch, J. Keintzel, T. Risselada, R. Tomás, F. Zimmermann CERN, Geneva, Switzerland Y.M. Nosochkov SLAC, Menlo Park, California, USA D. Zhou KEK, Ibaraki, Japan L. van Riesen-Haupt JAI, Oxford, United Kingdom
	One possible future hadron collider design investigated in the framework of the Future Circular Collider (FCC) study is the High-Energy LHC (HE-LHC). Using the 16 T dipoles developed for the FCC-hh the center of mass energy of the LHC is set to increase to 27 TeV. To achieve this set energy goal, a new optics design is required, taking into account the constraint from the LHC tunnel geometry. In this paper, two different lattices for the HE-LHC are presented. Initial considerations take into account the physical aperture at the proposed injection energy as well as the energy reach of these lattices. The dynamic aperture at the injection energies is determined using latest evaluations of the field quality of the main dipoles.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMK002
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

High-Energy LHC Design

269

F. Zimmermann, D. Amorim, S. A. Antipov, S. Arsenyev, M. Benedikt, R. Bruce, M.P. Crouch, S.D. Fartoukh, M. Giovannozzi, B. Goddard, M. Hofer, R. Kersevan, V. Mertens, Y. Muttoni, J.A. Osborne, V. Parma, V. Raginel, S. Redaelli, T. Risselada, I. Ruehl, B. Salvant, D. Schoerling, E.N. Shaposhnikova, L.J. Tavian, E. Todesco, R. Tomás, D. Tommasini, F. Valchkova-Georgieva, V. Venturi, D. Wollmann
CERN, Geneva, Switzerland
J.L. Abelleira, E. Cruz Alaniz, P. Martinez Mirave, A. Seryi, L. van Riesen-Haupt
JAI, Oxford, United Kingdom
A. Apyan
ANSL, Yerevan, Armenia
J. Barranco García, L. Mether, T. Pieloni, L. Rivkin, C. Tambasco
EPFL, Lausanne, Switzerland
F. Burkart
DESY, Hamburg, Germany
Y. Cai, Y.M. Nosochkov
SLAC, Menlo Park, California, USA
G. Guillermo Cantón
CINVESTAV, Mérida, Mexico
K. Ohmi, K. Oide, D. Zhou
KEK, Ibaraki, Japan

In the frame of the FCC study we are designing a 27 TeV hadron collider in the LHC tunnel, called the High Energy LHC (HE-LHC).

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF064

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF067

Optimized Arc Optics for the HE-LHC

277

Y.M. Nosochkov, Y. Cai
SLAC, Menlo Park, California, USA
M.P. Crouch, M. Giovannozzi, M. Hofer, J. Keintzel, T. Risselada, E. Todesco, R. Tomás, F. Zimmermann
CERN, Geneva, Switzerland
D. Zhou
KEK, Ibaraki, Japan
L. van Riesen-Haupt
JAI, Oxford, United Kingdom

Funding: Work supported by the European Commission under Capacities 7th Framework Programme project EuCARD-2, grant agreement 312453, and the HORIZON 2020 project EuroCirCol, grant agreement 654305.
The High Energy LHC (HE-LHC) proton-proton collider is a proposed replacement of the LHC in the existing 27-km tunnel, with the goal of reaching the centre-of-mass beam energy of 27 TeV. The required higher dipole field can be realized by using 16-T dipoles being developed for the FCC-hh design. A major concern is the dynamic aperture at injection energy due to degraded field quality of the new dipole based on Nb3Sn superconductor, the potentially large energy swing between injection and collision, and the slightly reduced magnet aperture. Another issue is the field in quadrupoles and sextupoles at top energy, for which it may be cost-effective, wherever possible, to stay with Nb-Ti technology. In this study, we explore design options differed by arc lattice, for three choices of injection energy, with the goal of attaining acceptable magnet field and maximum injection dynamic aperture with dipole non-linear field errors.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF067

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMK001

Optics for RF Acceleration Section for the High Energy Large Hadron Collider

345

L. van Riesen-Haupt, J.L. Abelleira
University of Oxford, Oxford, United Kingdom
J.L. Abelleira, E. Cruz Alaniz, P. Martinez Mirave, A. Seryi
JAI, Oxford, United Kingdom
M. Hofer, F. Zimmermann
CERN, Geneva, Switzerland
D. Zhou
KEK, Ibaraki, Japan

Funding: Work supported by the Horizon 2020 project EuroCirCol, grant 654305 and by the Science and Technology Facilities Council
As part of the FCC study, the design of the High Energy LHC (HE-LHC) is addressed. A proposed layout for the interaction region for the containing the radio frequency (RF) cavities and various beam instrumentation will be discussed. The higher energy requires more RF cavities, which strongly restricts the space available for optics and instrumentation. Another challenge arises because the beam rigidity increases whilst the LHC geometry has to be conserved. To this end, next generation dipoles have to be used in order to achieve sufficient beam to beam separation. A design that provides enough beam stay clear (BSC) in all the magnets will be presented. The design introduces an additional quadrupole on either side of the RF region to be used for phase advance adjustments that can increase the dynamic aperture.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMK001

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAF060

Injection and Dump Systems for a 13.5 TeV Hadron Synchrotron HE-LHC

858

W. Bartmann, M.J. Barnes, L. Ducimetière, B. Goddard, M. Hofer, T. Kramer, A. Lechner, E. Renner, A. Sanz Ull, V. Senaj, L.S. Stoel, C. Wiesner
CERN, Geneva, Switzerland

One option for a future circular collider at CERN is to build a 13.5 TeV hadron synchrotron, or High Energy LHC (HE-LHC) in the LHC tunnel. Injection and dump systems will have to be upgraded to cope with the higher beam rigidity and increased damage potential of the beam. The required modifications of the beam transfer hardware are highlighted in view of technology advancements in the field of kicker switch technology. An optimised straight section optics is shown.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAF060

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMK002

Integrated Full HE-LHC Optics and Its Performance

348

M. Hofer
TU Vienna, Wien, Austria
M.P. Crouch, J. Keintzel, T. Risselada, R. Tomás, F. Zimmermann
CERN, Geneva, Switzerland
Y.M. Nosochkov
SLAC, Menlo Park, California, USA
D. Zhou
KEK, Ibaraki, Japan
L. van Riesen-Haupt
JAI, Oxford, United Kingdom

One possible future hadron collider design investigated in the framework of the Future Circular Collider (FCC) study is the High-Energy LHC (HE-LHC). Using the 16 T dipoles developed for the FCC-hh the center of mass energy of the LHC is set to increase to 27 TeV. To achieve this set energy goal, a new optics design is required, taking into account the constraint from the LHC tunnel geometry. In this paper, two different lattices for the HE-LHC are presented. Initial considerations take into account the physical aperture at the proposed injection energy as well as the energy reach of these lattices. The dynamic aperture at the injection energies is determined using latest evaluations of the field quality of the main dipoles.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMK002

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)