IPAC2018 - List of Authors (Gayde, J.)

Paper	Title	Page
WEPAF066	The New CLIC Main Linac Installation and Alignment Strategy	1979
	H. Mainaud Durand, J. Gayde, J. Jaros, M. Sosin, A. P. Zemanek CERN, Geneva, Switzerland V. Rude ESGT-CNAM, Le Mans, France
	A complete solution has been proposed for the pre-alignment of the CLIC main linac in 2012 for the Conceptual Design Report. Two recent studies provide new perspectives for such a pre-alignment. First in a study on Particle Accelerator Components' Metrology and Alignment to the Nanometre scale (PACMAN), new solutions to fiducialise and align different types of components within a micrometric accuracy on the same support were proposed and validated, using a stretched wire. Secondly, a 5 degree of freedom adjustment platform with plug-in motors showed a very accurate and efficient way to adjust remotely components. By combining the results of both studies, two scenarios of installation and alignment for the CLIC main linac are proposed, providing micrometric and automatized solutions of micrometric assembly, fiducialisation and alignment in metrological labs or in the tunnel. In this paper, the outcome of the two studies are presented; the two scenarios of installation and alignment are then detailed and discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAF066
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAF067	Alignment and Monitoring Systems for Accelerators and Experiments Based on BCAM - First Results and Benefits of Systems Developed for ATLAS, LHCb and HIE-ISOLDE	1983
	J. Gayde, B. Di Girolamo, Y. Kadi, G. Kautzmann, F. Klumb, R. Lindner, D. Mergelkuhl, L. Pontecorvo, M. Raymond, P. Sainvitu, E. Thomas CERN, Geneva, Switzerland F. Blanc, P. Stefko EPFL, Lausanne, Switzerland
	In the last few years alignment and monitoring systems based on BCAM* cameras active sensors, or their HBCAM evolution, have been developed at the request of the Technical Coordination of LHC experiments and HIE-ISOLDE facility Project Leader. ADEPO (ATLAS DEtector POsition) has been designed to speed up the precise closure - 0.3 mm - of large detector parts representing in total ~2500 tons. For LHCb a system has been studied and installed to monitor the positions of the Inner Tracker stations during the LHCb dipole magnet cycles. The MATHILDE (Monitoring and Alignment Tracking for HIE-ISOLDE) system has been developed to fulfil the alignment and monitoring needs for components of the LINAC enclosed in successive Cryo-Modules. These systems have been in each case configured and adapted to the objectives and environmental conditions: low space for integration; presence of magnetic fields; exposure to non-standard environmental conditions such as high vacuum and cryogenic temperatures. After a short description of the different systems and of the environmental constraints, this paper summarizes their first results, performances and their added value. * BCAM: Brandeis CCD Angle Monitor, http://alignment.hep.brandeis.edu/Devices/BCAM/
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAF067
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAF068	Frequency Scanning Interferometry as New Solution for on-Line Monitoring Inside a Cryostat for the HL-LHC project	1986
	H. Mainaud Durand, T. Dijoud, J. Gayde, F. Micolon, M. Sosin CERN, Geneva, Switzerland M. Duquenne, V. Rude ESGT-CNAM, Le Mans, France
	Funding: Research supported by the HL-LHC project For the HL-LHC project, the cryostats of the key components will be equipped permanently with an on-line position monitoring system based on Frequency Scanning Interferometry (FSI). Such a system, based on absolute distance measurement, will determine the position of the inner triplet cold masses w.r.t. their cryostat and the position of the crab cavities also inside their cryostat, within an uncertainty of measurement of 0.1 mm, in a harsh environment: cold temperature of 2 K and high radiation level of the order of 1 MGy. The FSI system was validated first successfully on one LHC dipole cryostat and its associated cold mass to undergo qualification tests under different conditions: warm, vacuum and cold (2K). The FSI system also equips the first crab cavities prototype cryostat. The configuration of the FIS system chosen after simulations, the conditions of tests as well as their results and analysis are presented in this paper.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAF068
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAF069	Evaluation of Frequency Scanning Interferometer Performances for Surveying, Alignment and Monitoring of Physics Instrumentation	1990
	J. Gayde, S.W. Kamugasa CERN, Geneva, Switzerland
	During the last three years, the performance of Frequency Scanning Interferometry, accurate to a few micrometres, has been evaluated at CERN in the frame of the PACMAN project. Improvements have been studied and tested to make it better suited for typical alignment and survey conditions in accelerators and experiments. The results of these developments and tests, coupled with the multi-channel capability of the system, and its compactness which eases its integration in the area to be surveyed, offer a wide scope of possible applications for in-situ large scale metrology for physics equipment and facility elements. Furthermore, the fact that the system electronics can be placed far away from the position to be measured, allows the system to be used in confined and hazardous spaces. This paper briefly describes the system and its improvements. It gives the precision obtained for distance measurements and for the 3D point reconstruction based on FSI observations in the case of CLIC component fiducialisation.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAF069
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

The New CLIC Main Linac Installation and Alignment Strategy

1979

H. Mainaud Durand, J. Gayde, J. Jaros, M. Sosin, A. P. Zemanek
CERN, Geneva, Switzerland
V. Rude
ESGT-CNAM, Le Mans, France

A complete solution has been proposed for the pre-alignment of the CLIC main linac in 2012 for the Conceptual Design Report. Two recent studies provide new perspectives for such a pre-alignment. First in a study on Particle Accelerator Components' Metrology and Alignment to the Nanometre scale (PACMAN), new solutions to fiducialise and align different types of components within a micrometric accuracy on the same support were proposed and validated, using a stretched wire. Secondly, a 5 degree of freedom adjustment platform with plug-in motors showed a very accurate and efficient way to adjust remotely components. By combining the results of both studies, two scenarios of installation and alignment for the CLIC main linac are proposed, providing micrometric and automatized solutions of micrometric assembly, fiducialisation and alignment in metrological labs or in the tunnel. In this paper, the outcome of the two studies are presented; the two scenarios of installation and alignment are then detailed and discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAF066

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAF067

Alignment and Monitoring Systems for Accelerators and Experiments Based on BCAM - First Results and Benefits of Systems Developed for ATLAS, LHCb and HIE-ISOLDE

1983

J. Gayde, B. Di Girolamo, Y. Kadi, G. Kautzmann, F. Klumb, R. Lindner, D. Mergelkuhl, L. Pontecorvo, M. Raymond, P. Sainvitu, E. Thomas
CERN, Geneva, Switzerland
F. Blanc, P. Stefko
EPFL, Lausanne, Switzerland

In the last few years alignment and monitoring systems based on BCAM* cameras active sensors, or their HBCAM evolution, have been developed at the request of the Technical Coordination of LHC experiments and HIE-ISOLDE facility Project Leader. ADEPO (ATLAS DEtector POsition) has been designed to speed up the precise closure - 0.3 mm - of large detector parts representing in total ~2500 tons. For LHCb a system has been studied and installed to monitor the positions of the Inner Tracker stations during the LHCb dipole magnet cycles. The MATHILDE (Monitoring and Alignment Tracking for HIE-ISOLDE) system has been developed to fulfil the alignment and monitoring needs for components of the LINAC enclosed in successive Cryo-Modules. These systems have been in each case configured and adapted to the objectives and environmental conditions: low space for integration; presence of magnetic fields; exposure to non-standard environmental conditions such as high vacuum and cryogenic temperatures. After a short description of the different systems and of the environmental constraints, this paper summarizes their first results, performances and their added value.
* BCAM: Brandeis CCD Angle Monitor, http://alignment.hep.brandeis.edu/Devices/BCAM/

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAF067

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAF068

Frequency Scanning Interferometry as New Solution for on-Line Monitoring Inside a Cryostat for the HL-LHC project

1986

H. Mainaud Durand, T. Dijoud, J. Gayde, F. Micolon, M. Sosin
CERN, Geneva, Switzerland
M. Duquenne, V. Rude
ESGT-CNAM, Le Mans, France

Funding: Research supported by the HL-LHC project
For the HL-LHC project, the cryostats of the key components will be equipped permanently with an on-line position monitoring system based on Frequency Scanning Interferometry (FSI). Such a system, based on absolute distance measurement, will determine the position of the inner triplet cold masses w.r.t. their cryostat and the position of the crab cavities also inside their cryostat, within an uncertainty of measurement of 0.1 mm, in a harsh environment: cold temperature of 2 K and high radiation level of the order of 1 MGy. The FSI system was validated first successfully on one LHC dipole cryostat and its associated cold mass to undergo qualification tests under different conditions: warm, vacuum and cold (2K). The FSI system also equips the first crab cavities prototype cryostat. The configuration of the FIS system chosen after simulations, the conditions of tests as well as their results and analysis are presented in this paper.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAF068

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAF069

Evaluation of Frequency Scanning Interferometer Performances for Surveying, Alignment and Monitoring of Physics Instrumentation

1990

J. Gayde, S.W. Kamugasa
CERN, Geneva, Switzerland

During the last three years, the performance of Frequency Scanning Interferometry, accurate to a few micrometres, has been evaluated at CERN in the frame of the PACMAN project. Improvements have been studied and tested to make it better suited for typical alignment and survey conditions in accelerators and experiments. The results of these developments and tests, coupled with the multi-channel capability of the system, and its compactness which eases its integration in the area to be surveyed, offer a wide scope of possible applications for in-situ large scale metrology for physics equipment and facility elements. Furthermore, the fact that the system electronics can be placed far away from the position to be measured, allows the system to be used in confined and hazardous spaces. This paper briefly describes the system and its improvements. It gives the precision obtained for distance measurements and for the 3D point reconstruction based on FSI observations in the case of CLIC component fiducialisation.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAF069

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)