| Paper | Title | Page |
|---|---|---|
| MOPMF034 | Layout and Performance of the FCC-ee Pre-Injector Chain | 169 |
|
||
| The Future Circular e+e− Collider pre-injector chain consists of a 6 GeV S-Band linac, a damping ring at 1.54 GeV and pre-booster ring to reach 20 GeV for injection to the main booster. The electron and positron beams use the same accelerator chain alternatively. The e+ beam is generated from a novel low level RF-gun providing 6.5 nC charge at 11 MeV with 0.5 micron geometric emittance. The e+ beam is produced by the impact of a 4.46 GeV e- beam onto a hybrid target, accelerated in the linac up to 1.54 GeV, and injected to the damping ring for emittance cooling. Simulations on the performance of the DR are presented for reaching the required equilibrium emittances at the required damping time. As an alternative option, a 20 GeV linac is considered utilising C-Band cavities and simulations studies have been undertaken regarding the beam transport and transmission efficiency up to that energy. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF034 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| MOPMF073 | Rejuvenation of 7-Gev SuperKEKB Injector Linac | 300 |
|
||
| KEK injector linac has delivered electrons and positrons for particle physics and photon science experiments for more than 30 years. It was upgraded for the SuperKEKB project, which aims at a 40-fold increase in luminosity over the previous project KEKB, in order to increase our understanding of flavor physics beyond the standard model of elementary particle physics. SuperKEKB energy-asymmetric electron-positron collider with its extremely high luminosity requires a high current, low emittance and low energy spread injection beam from the injector. The electron beam is generated by a new type of RF gun, that provides a much higher beam current to correspond to a large stored beam current and a short lifetime in the ring. The positron source is another major challenge that enhances the positron bunch intensity from 1 to 4 nC by increasing the positron capture efficiency, and the positron beam emittance is reduced from 2000 μm to 10 μm in the vertical plane by introducing a damping ring, followed by the bunch compressor and energy compressor. The summary of the rejuvenation is reported. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF073 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| TUPML060 | Three-Dimentional Spiral Beam Injection for a Compact Storage Ring | 1673 |
|
||
|
Funding: This work is supported by JSPS KAKENHI Grant Numbers JP26287055 and JP 23740216. A newly developed three-dimensional spiral injection scheme for beam insertion into a compact (medical MRI size) solenoidal storage ring is introduced. This is a one of key R&D items for a new planned muon g-2/EDM experiment at J-PARC, which aims to measure g-2 to a factor 5 better statistical precision and a factor of 100 better sensitivity for the electric dipole moment measurement (EDM) compared to the previous experiments. The new scheme provides a smooth injection utilizing a radial solenoidal fringe field, without causing any error field in the storage volume. Magnetic pulsed kicker will guide and set the beam in the storage field volume. The strongest point of this new scheme is that any source of the electric field is removed in this scheme to perform ideal EDM measurement. We have performed a test bench experimental work to demonstrate a feasibility of this new injection scheme. Instead of the muon beam, we inject electron beam, from an electron-gun, into the solenoid magnet, and detect three-dimensional spiral beam trajectory inside of the storage chamber by CCD camera. We will discuss outline of a new injection scheme and the latest results from the test bench works. *H. Iinuma et al.,Nuclear Instruments and Methods in Physics Research A, 832, 51-62 (2016) |
||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPML060 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| WEPAK014 | A New Pulse Magnet Control System in the KEK Electron Positron LINAC | 2121 |
|
||
| In 2017, sixty-four pules magnets were installed in the KEK e+/e− LINAC for simultaneous injection to four different rings. Since each ring requires different injection energy, magnetic field in the LINAC has to be changed shot by shot (every 20 ms) according to the destination of the beam. To realize such operation, a PXI express based new control system was installed. Each unit, which consists of an event receiver board, a DAC board, and a ADC board, can set and monitor output current up to 8 pulsed power supply in 16 bit resolution. The timing and control system are integrated in that of the LINAC by using Micro-Research Finland's PXI event receiver board. In terms of software, Windows 8.1 and LabVIEW 2016 were mainly adopted to control the hardware. EPICS channel access (CA) protocol was used to communicate with operator's interface panels. In addition to real-time monitoring by EPICS CA and logging by CSS archiver every 10 s, data are logged every shot (every 20 ms) in the text file together with timestamp, shot ID and destination. At present, thirteen units are stably in operation to control 64 magnets. Further installation of the system is planned in 2018. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAK014 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |