| Paper |
Title |
Page |
| TUPMF086 |
Status of the ARES RF Gun at SINBAD: From its Characterization and Installation towards Commissioning |
1474 |
| |
- B. Marchetti, R.W. Aßmann, S. Baark, F. Burkart, U. Dorda, K. Flöttmann, I. Hartl, J. Hauser, J. Herrmann, M. Hüning, K. Knebel, O. Krebs, G. Kube, W. Kuropka, S. Lederer, F. Lemery, F. Ludwig, D. Marx, F. Mayet, M. Pelzer, I. Peperkorn, F. Poblotzki, S. Pumpe, J. Rothenburg, H. Schlarb, M. Titberidze, G. Vashchenko, T. Vinatier, P.A. Walker, L. Winkelmann, K. Wittenburg, S. Yamin, J. Zhu
DESY, Hamburg, Germany
|
|
| |
The SINBAD facility (Short and INnovative Bunches and Accelerators at DESY) is foreseen to host multiple experiments relating to the production of ultra-short electron bunches and novel high gradient acceleration techniques. The SINBAD-ARES linac will be a conventional S-band linear RF accelerator allowing the production of low charge (0.5 pC - tens pC) ultra-short electron bunches (FWHM length =< 1 fs - few fs) with 100 MeV energy. The installation of the linac will proceed in stages. In this paper we report on the status of the characterization of the ARES RF gun and the installations of the related infrastructure.
|
|
| DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF086
|
|
| Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
| |
| WEPMF055 |
The REGAE Accelerator Vacuum System |
2493 |
| |
- S. Lederer, K. Flöttmann, L. Lilje, N. Plambeck
DESY, Hamburg, Germany
|
|
| |
Since 2011 the Relativistic Electron Gun for Atomic Exploration (REGAE) is operated at DESY in Hamburg. The accelerator consists mainly of a high gradient S-band RF-gun, which generates ultra-low emittance electron bunches, and an S-band RF-buncher cavity for bunch compression. In this contribution we describe the vacuum system of the REGAE accelerator. We will cover design aspects, applied cleaning and installation procedures as well as operation experience over the last years.
|
|
| DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IPAC2018-WEPMF055
|
|
| Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
| |
| THPML054 |
Design Studies of an S-Band Multipacting Electron Gun |
4759 |
| SUSPF051 |
|
| |
- C. Henkel, W. Hillert, V. Miltchev
University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany
- K. Flöttmann
DESY, Hamburg, Germany
|
|
| |
A multipacting electron gun (MEG) is a micro-pulse electron source based on secondary electron emission in a resonant microwave cavity structure for the generation of low emittance electron bunches with high repetition rate. By theoretical simulations a suitable radio-frequency gun design at 3 GHz is established, simultaneously meeting the demands of bunch production and amplification process as well as including the effects of space charge and beam loading for the evolution of a stable beam. In this contribution we show detailed simulation studies of the impact of important design parameters like mechanical dimensions and choice of material on the average output current, which is in the order of several mA. For the experimental investigation a test setup is under construction, which may demonstrate the application of MEG's as a serious alternative or addition to commonly used electron sources like thermionic and photocathodes.
|
|
| DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IPAC2018-THPML054
|
|
| Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
| |