IPAC2018 - List of Authors (Flisgen, T.)

Paper	Title	Page
WEPML048	HOM Power Levels in the BESSY VSR Cold String	2808
	A.V. Tsakanian, T. Flisgen Helmholtz-Zentrum Berlin für Materialien und Energie GmbH (HZB), Berlin, Germany H.-W. Glock, J. Knobloch, A.V. Vélez HZB, Berlin, Germany
	The BESSY VSR upgrade of the BESSY II light source represents a novel approach to simultaneously store long (ca. 15ps) and short (ca. 1.7ps) bunches in the storage ring. This challenging goal requires installation of four new SRF cavities (2x1.5 GHz and 2x1.75 GHz) in one module for installation in a single straight. These cavities are equipped with strong waveguide HOM dampers necessary for stable operation. The expected HOM power and spectrum has been analyzed for the complete cold string. The cold string is a combination of various elements such as SRF cavities, bellows with and without shielding, warm HOM beampipe absorbers and UHV pumping domes. The presented study is performed for various BESSY VSR bunch filling patterns with 300 mA beam current. The contribution of each component to the total HOM power is presented. In addition the optimization of different cavity arrangements in the module is performed in order to reach the optimal operation conditions with equally distributed power levels along the string and tolerable beam coupling impedance.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPML048
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMF030	VSR Injector Upgrade at BESSY II	4110
	T. Atkinson, P. Goslawski, J.G. Hwang, M. Ries HZB, Berlin, Germany T. Flisgen, T. Mertens Helmholtz-Zentrum Berlin für Materialien und Energie GmbH (HZB), Berlin, Germany
	BESSY VSR is a fully funded project at the Helmholtz-Zentrum in Berlin (HZB). The objective is to produce simultaneously both long and short pulses in the storage ring. The implications for the existing injector systems and the upgrade strategy are presented. Envisaged is a global upgrade which includes additional accelerating structures to reduce the bunch length in the booster, orbit measurements and implementing longitudinal feedback.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF030
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMF033	Design of the Beamline Elements in the BESSY VSR Cold String	4123
	H.-W. Glock, F. Glöckner, J. Knobloch, E. Sharples, A.V. Tsakanian, A.V. Vélez HZB, Berlin, Germany T. Flisgen Helmholtz-Zentrum Berlin für Materialien und Energie GmbH (HZB), Berlin, Germany
	Funding: Work supported by German Bundesministerium für Bildung und Forschung, Land Berlin, and grants of the Helmholtz Association The four SRF cavities in the BESSY VSR module will be linked by bellows, which will be equipped with inner coaxial shielding pipes to prevent both parasitic fundamental mode losses and beam-induced heating. The central bellow will also act as a collimator for synchrotron radiation generated in the closest upstream dipole magnet. Additional bellows at the module's ends are needed to connect with the warm BESSY beam pipe. Outside the module the beam pipe cross section transitions will be located, which will be equipped with toroidal HOM absorbing elements. In the paper the recent design considerations and specifications for all those components will be described.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF033
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAF085	Estimation of Dielectric Losses in the Bessy VSR Warm Beam Pipe Absorbers	3185
	T. Flisgen Rostock University, Faculty of Computer Science and Electrical Engineering, Rostock, Germany H.-W. Glock HZB, Berlin, Germany A.V. Tsakanian Helmholtz-Zentrum Berlin für Materialien und Energie GmbH (HZB), Berlin, Germany
	Funding: Work supported by the German Bundesministerium für Bildung und Forschung, Land Berlin and grants of Helmholtz Association. Currently Helmholtz Zentrum Berlin prepares the update of the BESSY II ring to BESSY VSR. The updated ring will be capable to simultaneously store short and long bunches to satisfy the various user demands. For this sake, a cryomodule accommodating two 1.5 GHz and two 1.75 GHz superconducting cavities will be installed into the storage ring. The cavity string will be equipped with warm dielectric absorber rings at both ends. Together with the waveguide dampers of the cavities, these rings damp electromagnetic fields excited by the beam. This contribution presents the estimation of the dielectric losses in the beam pipe absorber rings of the BESSY VSR module. The presented approach is based on determining a broad band impedance of the dielectric ring by exciting the numerical model with a single broad band Gaussian bunch. Subsequently, the power deposited into the ring is estimated in frequency domain by multiplying the impedance with the square of the beam current for all considered harmonics of the beam. Finally, these power contributions are added up. In addition to details of the scheme, the contribution presents results for the recent absorber layout of the BESSY VSR string.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAF085
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

HOM Power Levels in the BESSY VSR Cold String

2808

A.V. Tsakanian, T. Flisgen
Helmholtz-Zentrum Berlin für Materialien und Energie GmbH (HZB), Berlin, Germany
H.-W. Glock, J. Knobloch, A.V. Vélez
HZB, Berlin, Germany

The BESSY VSR upgrade of the BESSY II light source represents a novel approach to simultaneously store long (ca. 15ps) and short (ca. 1.7ps) bunches in the storage ring. This challenging goal requires installation of four new SRF cavities (2x1.5 GHz and 2x1.75 GHz) in one module for installation in a single straight. These cavities are equipped with strong waveguide HOM dampers necessary for stable operation. The expected HOM power and spectrum has been analyzed for the complete cold string. The cold string is a combination of various elements such as SRF cavities, bellows with and without shielding, warm HOM beampipe absorbers and UHV pumping domes. The presented study is performed for various BESSY VSR bunch filling patterns with 300 mA beam current. The contribution of each component to the total HOM power is presented. In addition the optimization of different cavity arrangements in the module is performed in order to reach the optimal operation conditions with equally distributed power levels along the string and tolerable beam coupling impedance.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPML048

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMF030

VSR Injector Upgrade at BESSY II

4110

T. Atkinson, P. Goslawski, J.G. Hwang, M. Ries
HZB, Berlin, Germany
T. Flisgen, T. Mertens
Helmholtz-Zentrum Berlin für Materialien und Energie GmbH (HZB), Berlin, Germany

BESSY VSR is a fully funded project at the Helmholtz-Zentrum in Berlin (HZB). The objective is to produce simultaneously both long and short pulses in the storage ring. The implications for the existing injector systems and the upgrade strategy are presented. Envisaged is a global upgrade which includes additional accelerating structures to reduce the bunch length in the booster, orbit measurements and implementing longitudinal feedback.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF030

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMF033

Design of the Beamline Elements in the BESSY VSR Cold String

4123

H.-W. Glock, F. Glöckner, J. Knobloch, E. Sharples, A.V. Tsakanian, A.V. Vélez
HZB, Berlin, Germany
T. Flisgen
Helmholtz-Zentrum Berlin für Materialien und Energie GmbH (HZB), Berlin, Germany

Funding: Work supported by German Bundesministerium für Bildung und Forschung, Land Berlin, and grants of the Helmholtz Association
The four SRF cavities in the BESSY VSR module will be linked by bellows, which will be equipped with inner coaxial shielding pipes to prevent both parasitic fundamental mode losses and beam-induced heating. The central bellow will also act as a collimator for synchrotron radiation generated in the closest upstream dipole magnet. Additional bellows at the module's ends are needed to connect with the warm BESSY beam pipe. Outside the module the beam pipe cross section transitions will be located, which will be equipped with toroidal HOM absorbing elements. In the paper the recent design considerations and specifications for all those components will be described.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF033

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAF085

Estimation of Dielectric Losses in the Bessy VSR Warm Beam Pipe Absorbers

3185

T. Flisgen
Rostock University, Faculty of Computer Science and Electrical Engineering, Rostock, Germany
H.-W. Glock
HZB, Berlin, Germany
A.V. Tsakanian
Helmholtz-Zentrum Berlin für Materialien und Energie GmbH (HZB), Berlin, Germany

Funding: Work supported by the German Bundesministerium für Bildung und Forschung, Land Berlin and grants of Helmholtz Association.
Currently Helmholtz Zentrum Berlin prepares the update of the BESSY II ring to BESSY VSR. The updated ring will be capable to simultaneously store short and long bunches to satisfy the various user demands. For this sake, a cryomodule accommodating two 1.5 GHz and two 1.75 GHz superconducting cavities will be installed into the storage ring. The cavity string will be equipped with warm dielectric absorber rings at both ends. Together with the waveguide dampers of the cavities, these rings damp electromagnetic fields excited by the beam. This contribution presents the estimation of the dielectric losses in the beam pipe absorber rings of the BESSY VSR module. The presented approach is based on determining a broad band impedance of the dielectric ring by exciting the numerical model with a single broad band Gaussian bunch. Subsequently, the power deposited into the ring is estimated in frequency domain by multiplying the impedance with the square of the beam current for all considered harmonics of the beam. Finally, these power contributions are added up. In addition to details of the scheme, the contribution presents results for the recent absorber layout of the BESSY VSR string.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAF085

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)