IPAC2018 - List of Authors (Dorda, U.)

Paper	Title	Page
TUPMF086	Status of the ARES RF Gun at SINBAD: From its Characterization and Installation towards Commissioning	1474
	B. Marchetti, R.W. Aßmann, S. Baark, F. Burkart, U. Dorda, K. Flöttmann, I. Hartl, J. Hauser, J. Herrmann, M. Hüning, K. Knebel, O. Krebs, G. Kube, W. Kuropka, S. Lederer, F. Lemery, F. Ludwig, D. Marx, F. Mayet, M. Pelzer, I. Peperkorn, F. Poblotzki, S. Pumpe, J. Rothenburg, H. Schlarb, M. Titberidze, G. Vashchenko, T. Vinatier, P.A. Walker, L. Winkelmann, K. Wittenburg, S. Yamin, J. Zhu DESY, Hamburg, Germany
	The SINBAD facility (Short and INnovative Bunches and Accelerators at DESY) is foreseen to host multiple experiments relating to the production of ultra-short electron bunches and novel high gradient acceleration techniques. The SINBAD-ARES linac will be a conventional S-band linear RF accelerator allowing the production of low charge (0.5 pC - tens pC) ultra-short electron bunches (FWHM length =< 1 fs - few fs) with 100 MeV energy. The installation of the linac will proceed in stages. In this paper we report on the status of the characterization of the ARES RF gun and the installations of the related infrastructure.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF086
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPML035	FELs Driven by Laser Plasma Accelerators Operated with Transverse Gradient Undulators	1615
	F. Jafarinia, R.W. Aßmann, F. Burkart, U. Dorda, C. Lechner, B. Marchetti, R. Rossmanith, P.A. Walker DESY, Hamburg, Germany A. Bernhard, R. Rossmanith KIT, Karlsruhe, Germany
	Laser Plasma Accelerators produce beams with a significantly higher energy spread (up to a few percent) compared to conventional electron sources. The high energy spread increases significantly the gain length when used for an FEL. In order to reduce the gain length of the FEL the Transverse Gradient Undulators (TGUs) instead of conventional undulators were proposed. In this paper the limits of this concept are discussed using a modified Version of the GENESIS program. Zhirong Huang et al., Phys. Rev. Lett., 109, 204801
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPML035
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPML038	Simulation of Phase-Dependent Transverse Focusing in Dielectric Laser Accelerator Based Lattices	1622
SUSPF037	use link to see paper's listing under its alternate paper code
	F. Mayet, R.W. Aßmann, U. Dorda, W. Kuropka DESY, Hamburg, Germany W. Kuropka, F. Mayet University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany
	Funding: Gordon and Betty Moore Foundation. Grant GBMF4744 The Accelerator on a CHip International Program (ACHIP) funded by the Gordon and Betty Moore Foundation aims to demonstrate a prototype of a fully integrated accelerator on a microchip based on laser-driven dielectric structures until 2021. Such an accelerator on a chip needs all components known from classical accelerators. This includes an electron source, accelerating structures and transverse focusing arrangements. Since the period of the accelerating field is connected to the drive laser wavelength of typically a few microns, not only longitudinal but also transverse effects are strongly phase-dependent even for few femtosecond long bunches. If both the accelerating and focusing elements are DLA-based, this needs to be taken into account. In this work we study in detail the implications of a phase-dependent focusing lattice on the evolution of the transverse phase space of a transported bunch.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPML038
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPML039	First Order Sensitivity Analysis of Electron Acceleration in Dual Grating Type Dielectric Laser Accelerator Structures	1626
	F. Mayet, R.W. Aßmann, U. Dorda, W. Kuropka DESY, Hamburg, Germany W. Kuropka, F. Mayet University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany
	Funding: Gordon and Betty Moore Foundation. Grant GBMF4744 Symmetrically driven dual-grating type DLA (Dielectric Laser Accelerator) linac structures allow for in-channel electric field gradients on the order of GV/m at optical wavelengths. In this work we study the sensitivity of important final beam parameters like mean energy, energy spread and transverse emittance on DLA drive laser as well as input beam parameters. To this end a fast specialized particle tracking code (DLATracker) is used to compute the so called first order sensitivity indices based on a large number of Monte Carlo simulation runs of an exemplary external injection based DLA experiment. The results of this work point out important stability constraints on the drive laser setup and the externally injected electron beam.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPML039
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPML041	Two-Stage Laser-Driven Plasma Acceleration With External Injection for EuPRAXIA	1634
	E.N. Svystun, R.W. Aßmann, U. Dorda, A. Ferran Pousa, T. Heinemann, B. Marchetti, P.A. Walker, M.K. Weikum, J. Zhu DESY, Hamburg, Germany A. Ferran Pousa, T. Heinemann, A. Martinez de la Ossa University of Hamburg, Hamburg, Germany T. Heinemann USTRAT/SUPA, Glasgow, United Kingdom
	The EuPRAXIA (European Particle Research Accelerator with eXcellence In Applications) project aims at producing a conceptual design for the worldwide plasma-based accelerator facility, capable of delivering multi-GeV electron beams with high quality. This accelerator facility will be used for various user applications such as compact X-ray sources for medical imaging and high-energy physics detector tests. EuPRAXIA explores different approaches to plasma acceleration techniques. Laser-driven plasma wakefield acceleration with external injection of an RF-generated electron beam is one of the basic research directions of EuPRAXIA. We present studies of electron beam acceleration to GeV energies by a two-stage laser wakefield acceleration with external injection from an RF accelerator. Electron beam injection, acceleration and extraction from the plasma, using particle-in-cell simulations, are investigated.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPML041
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAL068	Status of the Polarix-TDS Project	3808
	P. Craievich, M. Bopp, H.-H. Braun, R. Ganter, T. Kleeb, M. Pedrozzi, E. Prat, S. Reiche, R. Zennaro PSI, Villigen PSI, Switzerland R.W. Aßmann, F. Christie, R.T.P. D'Arcy, U. Dorda, M. Foese, P. González Caminal, M. Hoffmann, M. Hüning, R. Jonas, O. Krebs, S. Lederer, V. Libov, B. Marchetti, D. Marx, J. Osterhoff, F. Poblotzki, M. Reukauff, H. Schlarb, S. Schreiber, G. Tews, M. Vogt, A. Wagner DESY, Hamburg, Germany N. Catalán Lasheras, A. Grudiev, G. McMonagle, W. Wuensch CERN, Geneva, Switzerland
	A collaboration between DESY, PSI and CERN has been established to develop and build an advanced modular X-band transverse deflection structure (TDS) system with the new feature of providing variable polarization of the deflecting force. This innovative CERN design requires very high manufacturing precision to guarantee highest azimuthal symmetry of the structure to avoid the deterioration of the polarization of the streaking field. Therefore, the high-precision tuning-free production process developed at PSI for the C-band and X-band accelerating structures will be used for the manufacturing. We summarize in this paper the status of the production of the prototype and the waveguide networks foreseen in the different facilities.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL068
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Status of the ARES RF Gun at SINBAD: From its Characterization and Installation towards Commissioning

1474

B. Marchetti, R.W. Aßmann, S. Baark, F. Burkart, U. Dorda, K. Flöttmann, I. Hartl, J. Hauser, J. Herrmann, M. Hüning, K. Knebel, O. Krebs, G. Kube, W. Kuropka, S. Lederer, F. Lemery, F. Ludwig, D. Marx, F. Mayet, M. Pelzer, I. Peperkorn, F. Poblotzki, S. Pumpe, J. Rothenburg, H. Schlarb, M. Titberidze, G. Vashchenko, T. Vinatier, P.A. Walker, L. Winkelmann, K. Wittenburg, S. Yamin, J. Zhu
DESY, Hamburg, Germany

The SINBAD facility (Short and INnovative Bunches and Accelerators at DESY) is foreseen to host multiple experiments relating to the production of ultra-short electron bunches and novel high gradient acceleration techniques. The SINBAD-ARES linac will be a conventional S-band linear RF accelerator allowing the production of low charge (0.5 pC - tens pC) ultra-short electron bunches (FWHM length =< 1 fs - few fs) with 100 MeV energy. The installation of the linac will proceed in stages. In this paper we report on the status of the characterization of the ARES RF gun and the installations of the related infrastructure.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF086

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPML035

FELs Driven by Laser Plasma Accelerators Operated with Transverse Gradient Undulators

1615

F. Jafarinia, R.W. Aßmann, F. Burkart, U. Dorda, C. Lechner, B. Marchetti, R. Rossmanith, P.A. Walker
DESY, Hamburg, Germany
A. Bernhard, R. Rossmanith
KIT, Karlsruhe, Germany

Laser Plasma Accelerators produce beams with a significantly higher energy spread (up to a few percent) compared to conventional electron sources. The high energy spread increases significantly the gain length when used for an FEL. In order to reduce the gain length of the FEL the Transverse Gradient Undulators (TGUs) instead of conventional undulators were proposed. In this paper the limits of this concept are discussed using a modified Version of the GENESIS program*.
*Zhirong Huang et al., Phys. Rev. Lett., 109, 204801

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPML035

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPML038

Simulation of Phase-Dependent Transverse Focusing in Dielectric Laser Accelerator Based Lattices

1622

SUSPF037

use link to see paper's listing under its alternate paper code

F. Mayet, R.W. Aßmann, U. Dorda, W. Kuropka
DESY, Hamburg, Germany
W. Kuropka, F. Mayet
University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany

Funding: Gordon and Betty Moore Foundation. Grant GBMF4744
The Accelerator on a CHip International Program (ACHIP) funded by the Gordon and Betty Moore Foundation aims to demonstrate a prototype of a fully integrated accelerator on a microchip based on laser-driven dielectric structures until 2021. Such an accelerator on a chip needs all components known from classical accelerators. This includes an electron source, accelerating structures and transverse focusing arrangements. Since the period of the accelerating field is connected to the drive laser wavelength of typically a few microns, not only longitudinal but also transverse effects are strongly phase-dependent even for few femtosecond long bunches. If both the accelerating and focusing elements are DLA-based, this needs to be taken into account. In this work we study in detail the implications of a phase-dependent focusing lattice on the evolution of the transverse phase space of a transported bunch.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPML038

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPML039

First Order Sensitivity Analysis of Electron Acceleration in Dual Grating Type Dielectric Laser Accelerator Structures

1626

F. Mayet, R.W. Aßmann, U. Dorda, W. Kuropka
DESY, Hamburg, Germany
W. Kuropka, F. Mayet
University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany

Funding: Gordon and Betty Moore Foundation. Grant GBMF4744
Symmetrically driven dual-grating type DLA (Dielectric Laser Accelerator) linac structures allow for in-channel electric field gradients on the order of GV/m at optical wavelengths. In this work we study the sensitivity of important final beam parameters like mean energy, energy spread and transverse emittance on DLA drive laser as well as input beam parameters. To this end a fast specialized particle tracking code (DLATracker) is used to compute the so called first order sensitivity indices based on a large number of Monte Carlo simulation runs of an exemplary external injection based DLA experiment. The results of this work point out important stability constraints on the drive laser setup and the externally injected electron beam.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPML039

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPML041

Two-Stage Laser-Driven Plasma Acceleration With External Injection for EuPRAXIA

1634

E.N. Svystun, R.W. Aßmann, U. Dorda, A. Ferran Pousa, T. Heinemann, B. Marchetti, P.A. Walker, M.K. Weikum, J. Zhu
DESY, Hamburg, Germany
A. Ferran Pousa, T. Heinemann, A. Martinez de la Ossa
University of Hamburg, Hamburg, Germany
T. Heinemann
USTRAT/SUPA, Glasgow, United Kingdom

The EuPRAXIA (European Particle Research Accelerator with eXcellence In Applications) project aims at producing a conceptual design for the worldwide plasma-based accelerator facility, capable of delivering multi-GeV electron beams with high quality. This accelerator facility will be used for various user applications such as compact X-ray sources for medical imaging and high-energy physics detector tests. EuPRAXIA explores different approaches to plasma acceleration techniques. Laser-driven plasma wakefield acceleration with external injection of an RF-generated electron beam is one of the basic research directions of EuPRAXIA. We present studies of electron beam acceleration to GeV energies by a two-stage laser wakefield acceleration with external injection from an RF accelerator. Electron beam injection, acceleration and extraction from the plasma, using particle-in-cell simulations, are investigated.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPML041

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAL068

Status of the Polarix-TDS Project

3808

P. Craievich, M. Bopp, H.-H. Braun, R. Ganter, T. Kleeb, M. Pedrozzi, E. Prat, S. Reiche, R. Zennaro
PSI, Villigen PSI, Switzerland
R.W. Aßmann, F. Christie, R.T.P. D'Arcy, U. Dorda, M. Foese, P. González Caminal, M. Hoffmann, M. Hüning, R. Jonas, O. Krebs, S. Lederer, V. Libov, B. Marchetti, D. Marx, J. Osterhoff, F. Poblotzki, M. Reukauff, H. Schlarb, S. Schreiber, G. Tews, M. Vogt, A. Wagner
DESY, Hamburg, Germany
N. Catalán Lasheras, A. Grudiev, G. McMonagle, W. Wuensch
CERN, Geneva, Switzerland

A collaboration between DESY, PSI and CERN has been established to develop and build an advanced modular X-band transverse deflection structure (TDS) system with the new feature of providing variable polarization of the deflecting force. This innovative CERN design requires very high manufacturing precision to guarantee highest azimuthal symmetry of the structure to avoid the deterioration of the polarization of the streaking field. Therefore, the high-precision tuning-free production process developed at PSI for the C-band and X-band accelerating structures will be used for the manufacturing. We summarize in this paper the status of the production of the prototype and the waveguide networks foreseen in the different facilities.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL068

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)