Author: Di Mitri, S.
Paper Title Page
WEPMF067 A High Gradient Solution for Increasing the Energy of the FERMI Linac 2525
 
  • C. Serpico, I. Cudin, S. Di Mitri, N. Shafqat, M. Svandrlik
    Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
  • M. Bopp, R. Zennaro
    PSI, Villigen PSI, Switzerland
  
  FERMI is the seeded Free Electron Laser (FEL) user facility at Elettra laboratory in Trieste, operating in the VUV to soft X-rays spectral range. In order to extend the FEL spectral range to shorter wavelengths, a feasibility study for increasing the Linac energy from 1.5 GeV to 1.8 GeV is actually going on. The design of new S-band accelerating structures, intended to replace the present Backward Travelling Wave sections, is presented. Such design is tailored for high gradient operation, low breakdown rates and low wakefield contribution. In this paper, we will also present the first, short prototype that has been built in collaboration with Paul Scherrer Institute (PSI).  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPMF067  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPMF058 The MariX source (Multidisciplinary Advanced Research Infrastructure with X-rays) 4199
 
  • V. Petrillo, N. Piovella
    Universita' degli Studi di Milano, Milano, Italy
  • A. Bacci, F. Castelli, S. Cialdi, C. Curatolo, I. Drebot, D. Giannotti, D. Giove, C. Meroni, A.R. Rossi, L. Serafini, M. Statera, V. Torri
    Istituto Nazionale di Fisica Nucleare, Milano, Italy
  • A. Bosotti, F. Broggi, F. Groppi, P. Michelato, L. Monaco, R. Paparella, D. Sertore
    INFN/LASA, Segrate (MI), Italy
  • R. Calandrino, A. Delvecchio
    HSP, Milan, Italy
  • F. Camera, S. Coelli, G. Onida, B. Paroli, L. Perini, F. Prelz, M. Rossetti Conti, F. Tomasi
    Universita' degli Studi di Milano & INFN, Milano, Italy
  • P. Cardarelli, M. Gambaccini, G. Paternò, A. Taibi
    INFN-Ferrara, Ferrara, Italy
  • A. Castoldi, G. Ghiringhelli, C. Guazzoni, M. Moretti, E. Pinotti
    Polytechnic of Milan, Milano, Italy
  • S. Di Mitri
    Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
  • A. Esposito, A. Gallo, C. Vaccarezza
    INFN/LNF, Frascati (Roma), Italy
  • L. Faillace
    RadiaBeam, Santa Monica, California, USA
  • G. Galzerano, E. Puppin, A. Tagliaferri
    Politecnico/Milano, Milano, Italy
  • G. Mettivier, P. Russo
    UniNa, Napoli, Italy
  • M. Placidi
    LBNL, Berkeley, California, USA
  • G. Rossi
    Università degli Studi di Milano, Milano, Italy
  • R.I. Saban
    CERN, Geneva, Switzerland
  • A. Sarno
    INFN-Napoli, Napoli, Italy
  • F. Stellato
    INFN - Roma Tor Vergata, Roma, Italy
  • G. Turchetti
    Bologna University, Bologna, Italy
  
  MariX (Multidisciplinary advanced research infra-structure with X-rays) is a joint project of INFN and University of Milan, aiming at developing a twin X-ray Source of advanced characteristics for the future Sci-entific Campus of the University of Milan. Presently in its design study phase, it will be built in the post Expo area located in north-west Milan district. The first component of the X-source MariX is BriXS (Bright and compact X-ray Source), a Compton X-ray source based on superconducting cavities technology for the electron beam with energy recirculation and on a laser system in Fabry-Pérot cavity at a repetition rate of 100 MHz, producing 20-180 keV radiation for medical applications. The BriXS accelerator is also serving as injector of a 3.8 GeV superconductive linac, driving a X-ray FEL at 1 MHz, for providing coherent, moderate flux radiation at 0.3-10 KeV at 1 MHz. Scientific case, layout and typical parameters of MariX will be discussed.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMF058  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)