IPAC2018 - List of Authors (Di Girolamo, B.)

Paper	Title	Page
TUZGBE3	Towards Implementation of Laser Engineered Surface Structures for Electron Cloud Mitigation	1220
	M. Sitko, V. Baglin, S. Calatroni, P. Chiggiato, B. Di Girolamo, E. Garcia-Tabares Valdivieso, M. Taborelli CERN, Geneva, Switzerland A. Abdolvand, D. Bajek, S. Wackerow University of Dundee, Nethergate, Dundee, Scotland, United Kingdom M. Colling, T.J. Jones, P.A. McIntosh STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
	The LHC operation has proven that the electron cloud could be a significant limiting factor in machine performance, in particular for future High Luminosity LHC (HL-LHC) beams. Electron clouds, generated by electron multipacting in the beam pipes, leads to beam instabilities and beam-induced heat load in cryogenic systems. Laser Engineered Surface Structures (LESS) is a novel surface treatment which changes the morphology of the internal surfaces of vacuum chambers. The surface modification results in a reduced secondary electron yield (SEY) and, consequently, in the eradication of the electron multipacting. Low SEY values of the treated surfaces and flexibility in choosing the laser parameters make LESS a promising treatment for future accelerators. LESS can be applied both in new and existing accelerators owing to the possibility of automated in-situ treatment. This approach has been developed and optimised for the LHC beam screens in which the electron cloud has to be mitigated before the HL-LHC upgrade. We will present the latest steps towards the implementation of LESS.
	Slides TUZGBE3 [1.825 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUZGBE3
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAF067	Alignment and Monitoring Systems for Accelerators and Experiments Based on BCAM - First Results and Benefits of Systems Developed for ATLAS, LHCb and HIE-ISOLDE	1983
	J. Gayde, B. Di Girolamo, Y. Kadi, G. Kautzmann, F. Klumb, R. Lindner, D. Mergelkuhl, L. Pontecorvo, M. Raymond, P. Sainvitu, E. Thomas CERN, Geneva, Switzerland F. Blanc, P. Stefko EPFL, Lausanne, Switzerland
	In the last few years alignment and monitoring systems based on BCAM* cameras active sensors, or their HBCAM evolution, have been developed at the request of the Technical Coordination of LHC experiments and HIE-ISOLDE facility Project Leader. ADEPO (ATLAS DEtector POsition) has been designed to speed up the precise closure - 0.3 mm - of large detector parts representing in total ~2500 tons. For LHCb a system has been studied and installed to monitor the positions of the Inner Tracker stations during the LHCb dipole magnet cycles. The MATHILDE (Monitoring and Alignment Tracking for HIE-ISOLDE) system has been developed to fulfil the alignment and monitoring needs for components of the LINAC enclosed in successive Cryo-Modules. These systems have been in each case configured and adapted to the objectives and environmental conditions: low space for integration; presence of magnetic fields; exposure to non-standard environmental conditions such as high vacuum and cryogenic temperatures. After a short description of the different systems and of the environmental constraints, this paper summarizes their first results, performances and their added value. * BCAM: Brandeis CCD Angle Monitor, http://alignment.hep.brandeis.edu/Devices/BCAM/
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAF067
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMG005	First Beam Test of Laser Engineered Surface Structures (LESS) at Cryogenic Temperature in CERN SPS Accelerator	2616
	R. Salemme, V. Baglin, S. Calatroni, P. Chiggiato, B. Di Girolamo, E. Garcia-Tabares Valdivieso, B. Jenninger, L. Prever-Loiri, M. Sitko CERN, Geneva, Switzerland A. Abdolvand, S. Wackerow University of Dundee, Nethergate, Dundee, Scotland, United Kingdom R. Salemme ITER Organization, St. Paul lez Durance, France
	Electron cloud mitigation is an essential requirement for accelerators of positive particles with high intensity beams to guarantee beam stability and limited heat load in cryogenic systems. Laser Engineered Surface Structures (LESS) are being considered, within the High Luminosity upgrade of the LHC collider at CERN (HL-LHC), as an option to reduce the Secondary Electron Yield (SEY) of the surfaces facing the beam, thus suppressing the elec-tron cloud phenomenon. As part of this study, a 2.2 m long Beam Screen (BS) with LESS has been tested at cryogenic temperature in the COLD bore EXperiment (COLDEX) facility in the SPS accelerator at CERN. In this paper, we describe the manufacturing procedure of the beam screen, the employed laser treatment technique and discuss our first observations in COLDEX confirming electron cloud suppression.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPMG005
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Towards Implementation of Laser Engineered Surface Structures for Electron Cloud Mitigation

1220

M. Sitko, V. Baglin, S. Calatroni, P. Chiggiato, B. Di Girolamo, E. Garcia-Tabares Valdivieso, M. Taborelli
CERN, Geneva, Switzerland
A. Abdolvand, D. Bajek, S. Wackerow
University of Dundee, Nethergate, Dundee, Scotland, United Kingdom
M. Colling, T.J. Jones, P.A. McIntosh
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom

The LHC operation has proven that the electron cloud could be a significant limiting factor in machine performance, in particular for future High Luminosity LHC (HL-LHC) beams. Electron clouds, generated by electron multipacting in the beam pipes, leads to beam instabilities and beam-induced heat load in cryogenic systems. Laser Engineered Surface Structures (LESS) is a novel surface treatment which changes the morphology of the internal surfaces of vacuum chambers. The surface modification results in a reduced secondary electron yield (SEY) and, consequently, in the eradication of the electron multipacting. Low SEY values of the treated surfaces and flexibility in choosing the laser parameters make LESS a promising treatment for future accelerators. LESS can be applied both in new and existing accelerators owing to the possibility of automated in-situ treatment. This approach has been developed and optimised for the LHC beam screens in which the electron cloud has to be mitigated before the HL-LHC upgrade. We will present the latest steps towards the implementation of LESS.

Slides TUZGBE3 [1.825 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUZGBE3

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAF067

Alignment and Monitoring Systems for Accelerators and Experiments Based on BCAM - First Results and Benefits of Systems Developed for ATLAS, LHCb and HIE-ISOLDE

1983

J. Gayde, B. Di Girolamo, Y. Kadi, G. Kautzmann, F. Klumb, R. Lindner, D. Mergelkuhl, L. Pontecorvo, M. Raymond, P. Sainvitu, E. Thomas
CERN, Geneva, Switzerland
F. Blanc, P. Stefko
EPFL, Lausanne, Switzerland

In the last few years alignment and monitoring systems based on BCAM* cameras active sensors, or their HBCAM evolution, have been developed at the request of the Technical Coordination of LHC experiments and HIE-ISOLDE facility Project Leader. ADEPO (ATLAS DEtector POsition) has been designed to speed up the precise closure - 0.3 mm - of large detector parts representing in total ~2500 tons. For LHCb a system has been studied and installed to monitor the positions of the Inner Tracker stations during the LHCb dipole magnet cycles. The MATHILDE (Monitoring and Alignment Tracking for HIE-ISOLDE) system has been developed to fulfil the alignment and monitoring needs for components of the LINAC enclosed in successive Cryo-Modules. These systems have been in each case configured and adapted to the objectives and environmental conditions: low space for integration; presence of magnetic fields; exposure to non-standard environmental conditions such as high vacuum and cryogenic temperatures. After a short description of the different systems and of the environmental constraints, this paper summarizes their first results, performances and their added value.
* BCAM: Brandeis CCD Angle Monitor, http://alignment.hep.brandeis.edu/Devices/BCAM/

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAF067

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMG005

First Beam Test of Laser Engineered Surface Structures (LESS) at Cryogenic Temperature in CERN SPS Accelerator

2616

R. Salemme, V. Baglin, S. Calatroni, P. Chiggiato, B. Di Girolamo, E. Garcia-Tabares Valdivieso, B. Jenninger, L. Prever-Loiri, M. Sitko
CERN, Geneva, Switzerland
A. Abdolvand, S. Wackerow
University of Dundee, Nethergate, Dundee, Scotland, United Kingdom
R. Salemme
ITER Organization, St. Paul lez Durance, France

Electron cloud mitigation is an essential requirement for accelerators of positive particles with high intensity beams to guarantee beam stability and limited heat load in cryogenic systems. Laser Engineered Surface Structures (LESS) are being considered, within the High Luminosity upgrade of the LHC collider at CERN (HL-LHC), as an option to reduce the Secondary Electron Yield (SEY) of the surfaces facing the beam, thus suppressing the elec-tron cloud phenomenon. As part of this study, a 2.2 m long Beam Screen (BS) with LESS has been tested at cryogenic temperature in the COLD bore EXperiment (COLDEX) facility in the SPS accelerator at CERN. In this paper, we describe the manufacturing procedure of the beam screen, the employed laser treatment technique and discuss our first observations in COLDEX confirming electron cloud suppression.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPMG005

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)