Paper |
Title |
Page |
THPAL050 |
Beam Dynamics of the First Beams for the IFMIF-EVEDA RFQ Commissioning |
3754 |
|
- C.S. Chen, W.S. Chan, Y.Y. Cheng, Y.-C. Chung, C.Y. Liu, Y.-H. Liu, Z.-D. Tsai
NSRRC, Hsinchu, Taiwan
|
|
|
Since December 31th 2014, the first synchrotron light from Taiwan Photon Source (TPS) was stored in the storage ring, the challenge to operate both Taiwan Light Source (TLS) and TPS smoothly and reliably became a significant issue for all members in NSRRC. On the one hand, the beam quality of former TLS must not been impaired due to the occupied resources by TPS, on the other hand, the most efforts were devoted to achieving steady operation of TPS. In order to operate both ring stably, some mutual backup structures were designed in the compressed air system and the chilled water system between TLS and TPS. The primary advantage of these mutual backup systems is minimizing the risk of beam-trip while any one of the utility system fails. Secondly, the mutual backup structures provide more flexible usage to accomplish energy conservation. From both risk-reduction and energy conservation points of view, the backup systems will do a great deal of good in the future.
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL050
|
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
THPAL056 |
Vibration Measurements in the TPS Vacuum System |
3772 |
|
- Y.C. Yang, C.K. Chan, C.-C. Chang, C.S. Chen, J. -Y. Chuang, Y.M. Hsiao, C.C. Liang, Y.Z. Lin
NSRRC, Hsinchu, Taiwan
|
|
|
The Taiwan Photon Source (TPS) is currently operated in top-up mode for users. In order to improve the stability of the synchrotron light source, vibrations related to the vacuum system have been investigated and improved by turning off pumping systems and reducing the flow rate in chamber cooling water circuits. In this paper, vibrations in different vacuum chambers with normal cooling water condition were investigated, their sources were recorded and clarified and properties of different materials for water tubes were also compared.
|
|
DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-IPAC2018-THPAL056
|
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|