IPAC2018 - List of Authors (Carwardine, J.)

Paper	Title	Page
TUZGBD3	Beam Diagnostics for the APS MBA Upgrade	1204
	N. Sereno, N.D. Arnold, R.W. Blake, A.R. Brill, H. Bui, J. Carwardine, G. Decker, L. Emery, T. Fors, P.S. Kallakuri, R.T. Keane, R.M. Lill, D.R. Paskvan, A.F. Pietryla, H. Shang, X. Sun, S. Veseli, J. Wang, S. Xu, B.X. Yang ANL, Argonne, Illinois, USA
	The Advanced Photon Source (APS) is currently in the preliminary design phase for a multi-bend acromat (MBA) lattice upgrade. Beam stability is critical where the requirements are driven from the beam size which is expected to approach 4 microns vertically at the insertion device (ID) source points. AC rms beam stability requirements are defined as 10 % the minimum source size at the ID in the band 0.01-1000 Hz. The vertical plane stability goal is the most ambitious requiring a stability of 400 nm at the ID source point. In addition, long term drift defined as motion over a seven day timescale can be no more than 1 micron. In order to achieve these demanding beam stability requirements, a suite of beam diagnostics will be required including rf BPMs, X-ray BPMs, a mechanical motion measurement system, beam size monitors and a real time orbit feedback system. In addition, a tune measurement system, transverse multi-bunch feedback system and current monitors are planned for the upgrade. We report on the beam diagnostics design and APS storage ring R&D results used to inform the design.
	Slides TUZGBD3 [16.748 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUZGBD3
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THXGBD1	The Upgrade of the Advanced Photon Source	2872
	M. Borland, M. Abliz, N.D. Arnold, T.G. Berenc, J.M. Byrd, J.R. Calvey, J.A. Carter, J. Carwardine, H. Cease, Z.A. Conway, G. Decker, J.C. Dooling, L. Emery, J.D. Fuerst, K.C. Harkay, A.K. Jain, M.S. Jaski, P.S. Kallakuri, M.P. Kelly, S.H. Kim, R.M. Lill, R.R. Lindberg, J. Liu, Z. Liu, J. Nudell, C.A. Preissner, V. Sajaev, N. Sereno, X. Sun, Y.P. Sun, S. Veseli, J. Wang, U. Wienands, A. Xiao, C. Yao ANL, Argonne, Illinois, USA A. Blednykh BNL, Upton, Long Island, New York, USA
	After decades of successful operation as a 7-GeV synchrotron radiation source, the Advanced Photon Source is pursing a major upgrade that involves replacement of the storage ring with an ultra-low emittance multi-bend achromat design. Using a seven-bend hybrid multi-bend achromat with reverse bending magnets gives a natural emittance of 42 pm operated at 6 GeV. The x-ray brightness is predicted to increase by more than two orders of magnitude. Challenges are many, but appear manageable based on thorough simulation and in light of the experience gained from world-wide operation of 3^\text{rd}-generation light sources. The upgraded ring will operate in swap-out mode, which has allowed pushing the performance beyond the limits imposed by conventional operation.
	Slides THXGBD1 [14.684 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THXGBD1
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Beam Diagnostics for the APS MBA Upgrade

1204

N. Sereno, N.D. Arnold, R.W. Blake, A.R. Brill, H. Bui, J. Carwardine, G. Decker, L. Emery, T. Fors, P.S. Kallakuri, R.T. Keane, R.M. Lill, D.R. Paskvan, A.F. Pietryla, H. Shang, X. Sun, S. Veseli, J. Wang, S. Xu, B.X. Yang
ANL, Argonne, Illinois, USA

The Advanced Photon Source (APS) is currently in the preliminary design phase for a multi-bend acromat (MBA) lattice upgrade. Beam stability is critical where the requirements are driven from the beam size which is expected to approach 4 microns vertically at the insertion device (ID) source points. AC rms beam stability requirements are defined as 10 % the minimum source size at the ID in the band 0.01-1000 Hz. The vertical plane stability goal is the most ambitious requiring a stability of 400 nm at the ID source point. In addition, long term drift defined as motion over a seven day timescale can be no more than 1 micron. In order to achieve these demanding beam stability requirements, a suite of beam diagnostics will be required including rf BPMs, X-ray BPMs, a mechanical motion measurement system, beam size monitors and a real time orbit feedback system. In addition, a tune measurement system, transverse multi-bunch feedback system and current monitors are planned for the upgrade. We report on the beam diagnostics design and APS storage ring R&D results used to inform the design.

Slides TUZGBD3 [16.748 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUZGBD3

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THXGBD1

The Upgrade of the Advanced Photon Source

2872

M. Borland, M. Abliz, N.D. Arnold, T.G. Berenc, J.M. Byrd, J.R. Calvey, J.A. Carter, J. Carwardine, H. Cease, Z.A. Conway, G. Decker, J.C. Dooling, L. Emery, J.D. Fuerst, K.C. Harkay, A.K. Jain, M.S. Jaski, P.S. Kallakuri, M.P. Kelly, S.H. Kim, R.M. Lill, R.R. Lindberg, J. Liu, Z. Liu, J. Nudell, C.A. Preissner, V. Sajaev, N. Sereno, X. Sun, Y.P. Sun, S. Veseli, J. Wang, U. Wienands, A. Xiao, C. Yao
ANL, Argonne, Illinois, USA
A. Blednykh
BNL, Upton, Long Island, New York, USA

After decades of successful operation as a 7-GeV synchrotron radiation source, the Advanced Photon Source is pursing a major upgrade that involves replacement of the storage ring with an ultra-low emittance multi-bend achromat design. Using a seven-bend hybrid multi-bend achromat with reverse bending magnets gives a natural emittance of 42 pm operated at 6 GeV. The x-ray brightness is predicted to increase by more than two orders of magnitude. Challenges are many, but appear manageable based on thorough simulation and in light of the experience gained from world-wide operation of 3^\text{rd}-generation light sources. The upgraded ring will operate in swap-out mode, which has allowed pushing the performance beyond the limits imposed by conventional operation.

Slides THXGBD1 [14.684 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THXGBD1

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)