| Paper | Title | Page |
|---|---|---|
| MOPMF039 | First Xenon-Xenon Collisions in the LHC | 180 |
|
||
| In 2017, the CERN accelerator complex once again demonstrated its flexibility by producing beams of a new ion species, xenon, that were successfully injected into LHC. On 12 October, collisions of fully stripped xenon nuclei were recorded for the first time in the LHC at a centre-of-mass energy per colliding nucleon pair of 5.44 TeV. Physics data taking started 9.5 h after the first injection of xenon beams and lasted a total of 6 h. The integrated luminosity delivered to the four LHC experiments was sufficient that new physics results can be expected soon. We provide a general overview of this Xe-Xe pilot run before focussing on beam data at injection energy and at flat-top. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF039 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| MOPMF062 | Upgrade of the Dilution System for HL-LHC | 261 |
|
||
| The LHC Beam Dump System is one of the most critical systems for reliable and safe operation of the LHC. A dedicated dilution system is required to sweep the beam over the front face of the graphite dump core in order to reduce the deposited energy density. The High Luminosity Large Hadron Collider (HL-LHC) project foresees to increase the total beam intensity in the ring by nearly a factor of two, resulting in a correspondingly higher energy deposition in the dump core. In this paper, the beam sweep pattern and energy deposition for the case of normal dilution as well as for the relevant failure cases are presented. The implications as well as possible mitigations and upgrade measures for the dilution system, such as decreasing the pulse-generator voltage, adding two additional kickers, and implementing a retrigger system, are discussed. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF062 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| MOPMF063 | Asynchronous Beam Dump Tests at LHC | 265 |
|
||
| The detailed understanding of the beam-loss pattern in case of an asynchronous beam dump is essential for the safe operation of the future High Luminosity LHC (HL-LHC) with nearly twice the nominal LHC beam intensity, leading to correspondingly higher energy deposition on the protection elements. An asynchronous beam dump is provoked when the rise time of the extraction kickers is not synchronized to the 3 us long particle-free abort gap. Thus, particles that are not absorbed by dedicated protection elements can be lost on the machine aperture. Since asynchronous beam dumps are among the most critical failure cases of the LHC, experimental tests at low intensity are performed routinely. This paper reviews recent asynchronous beam dump tests performed in the LHC. It describes the test conditions, discusses the beam-loss behaviour and presents simulation and measurement results. In particular, it examines a test event from May 2016, which led to the quench of four superconducting magnets in the extraction region and which was studied by a dedicated beam experiment in December 2017. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF063 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| TUPAF028 | Energy Deposition Studies and Analysis of the Quench Behavior in the Case of Asynchronous Dumps During 6.5 TeV LHC Proton Beam Operation | 736 |
|
||
| The CERN LHC beam dumping system comprises a series of septa and fast-pulsed kicker magnets for extracting the stored proton beams to the external beam dumps. Different absorbers in the extraction region protect superconducting magnets and other machine elements in case of abnormal beam aborts, where bunches are swept across the machine aperture. During Run 2 of the LHC, controlled beam loss experiments were carried out at 6.5 TeV probing the particle leakage from protection devices under realistic operation conditions. This paper presents particle shower simulations analyzing the energy deposition in superconducting coils and assessing if the observed magnet quenches are compatible with the presently known quench limits. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAF028 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| TUPAF059 | Design and Evaluation of FCC-hh Injection Protection Schemes | 854 |
|
||
| The Future Circular Collider (FCC) study considers several injector scenarios for FCC-hh, the proposed 100~TeV centre of mass hadron collider located at CERN. The investigated options include amongst others to use the LHC at 3.3~TeV or a superconducting SPS at 1.3~TeV as a High Energy Booster (HEB). Due to the high energy of the injected proton beam and the short time constant of injection failures, a thorough consideration of potential failure cases is of major importance. Further attention has to be given to the fact that the injection is - as in LHC - located upstream of the side experiments. Failure scenarios are identified for both injector options, appropriate designs of injection protection schemes are proposed and first simulations are conducted to validate the protection efficiency. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAF059 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| WEPAF070 | Commissioning of Beam Instrumentation at the CERN AWAKE Facility After Integration of the Electron Beam Line | 1993 |
|
||
|
The Advanced Proton Driven Plasma Wakefield Acceleration Experiment (AWAKE) is a project at CERN aiming to accelerate an electron bunch in a plasma wakefield driven by a proton bunch*. The plasma is induced in a 10 m long Rubidium vapour cell using a pulsed Ti:Sapphire laser, with the wakefield formed by a proton bunch from the CERN SPS. A 16 MeV electron bunch is simultaneously injected into the plasma cell to be accelerated by the wakefield to energies in GeV range over this short distance. After successful runs with the proton and laser beams, the electron beam line was installed and commissioned at the end of 2017 to produce and inject a suitable electron bunch into the plasma cell. To achieve the goals of the experiment, it is important to have reliable beam instrumentation measuring the various parameters of the proton, electron and laser beams such as transverse position, transverse profile as well as temporal synchronization. This contribution presents the status of the beam instrumentation in AWAKE, including the new instruments incorporated into the system for measurements with the electron beam line, and reports on the performance achieved during the AWAKE runs in 2017.
* Gschwendtner E., et al. "AWAKE, the Advanced Proton Driven Plasma Wakefield Experiment at CERN", NIM A 829 (2016)76-82 |
||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAF070 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| WEPMK003 | An Upgraded LHC Injection Kicker Magnet | 2632 |
|
||
|
Funding: Work supported by the HL-LHC project. An upgrade of the LHC injection kickers is necessary for HL-LHC to avoid excessive beam induced heating of these magnets: the intensity of the HL-LHC beam will be twice that of LHC. In addition, in the event that it is necessary to exchange an injection kicker magnet, the newly installed kicker magnet would limit HL-LHC operation for a few hundred hours due to dynamic vacuum activity. Extensive studies have been carried out to identify practical solutions to these problems: these include redistributing a significant portion of the beam induced power deposition to ferrite parts of the kicker magnet which are not at pulsed high voltage and water cooling of these parts. Furthermore a surface coating, to mitigate dynamic vacuum activity, has been selected. The results of these studies, except for water cooling, have been implemented on an upgraded LHC injection kicker magnet: this magnet was installed in the LHC during the 2017-18 Year End Technical Stop. This paper presents the upgrades, including some test and measurement results. |
||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPMK003 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |