IPAC2018 - List of Authors (Boscolo, M.)

Paper	Title	Page
MOPMF085	Beam-gas Background Characterization in the FCC-ee IR	322
	M. Boscolo, O.R. Blanco-García INFN/LNF, Frascati (Roma), Italy H. Burkhardt, R. Kersevan, M. Lueckhof CERN, Geneva, Switzerland F. Collamati INFN-Roma1, Rome, Italy
	The MDISim toolkit is used to evaluate and characterize the beam-gas induced background in the FCC-ee Interaction Region. MDISim allows a full characterization of this beam background source with the locations where the beam-gas scattering occurs as well as the loss points, as a function of different vacuum conditions and composition, for the nominal optics and parameters. Detailed pressure distribution profiles have been obtained running coupled synchrotron radiation and molecular flow montecarlo codes, as an input to the GEANT4 calculations. The particles hitting the pipe in the IR can be tracked in the detectors with a full Geant-4 simulation. Semi-analytic estimates for the expected rates and lifetime are also performed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF085
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF086	Proposal of an Experimental Test at DAΦNE for the Low Emittance Muon Beam Production From Positrons on Target	326
	M. Boscolo, M. Antonelli, O.R. Blanco-García, S. Guiducci, A. Stella INFN/LNF, Frascati (Roma), Italy F. Collamati INFN-Roma1, Rome, Italy R. Li Voti Sapienza University of Rome, Rome, Italy S.M. Liuzzo, P. Raimondi ESRF, Grenoble, France
	We present in this paper the proposal of an experimental test at DAΦNE of the positron-ring-plus-target scheme foreseen in the Low EMittance Muon Accelerator. This test would be a validation of the on-going studies for LEMMA and it would be synergic with other proposals at DAΦNE after the SIDDHARTA run. We discuss the beam dynamics studies for different targets inserted in a proper location through the ring, i.e. where the beam is focused and dispersion-free. Optimization of beam parameters, thickness and material of target and optics of the target insertion are shown as well. The development of the existent diagnostic needed to test the behavior of the circulating beam is described together with the turn-by-turn measurement systems of charge, lifetime and transverse size. Measurements on the temperature and thermo-mechanical stress on the target are also under study.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF086
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF087	Muon Accumulator Ring Requirements for a Low Emittance Muon Collider from Positrons on Target	330
	M. Boscolo, M. Antonelli, O.R. Blanco-García, S. Guiducci INFN/LNF, Frascati (Roma), Italy F. Collamati INFN-Roma1, Rome, Italy L. Keller SLAC, Menlo Park, California, USA S.M. Liuzzo, P. Raimondi ESRF, Grenoble, France D. Schulte CERN, Geneva, Switzerland
	Very low emittance muon beams can be produced by direct annihilation of about 45~GeV positrons on atomic electrons in a thin target. With such a muon beam source, a mu+mu- collider can be designed in the multi-TeV range at very high luminosities. In this scheme two muon accumulator rings are foreseen to recollect the muon bunches that will be injected in the collider. We present in this paper the first consideration of the muon accumulator rings. Realistic muon beam emittance and energy spread coming from the muon target are described. Constraints on the accumulator ring requirements are derived.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF087
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF088	Preparation Activity for the Siddharta-2 Run at DAΦNE	334
	C. Milardi, D. Alesini, S. Bini, O.R. Blanco-García, M. Boscolo, B. Buonomo, S. Cantarella, S. Caschera, A. D'Uffizi, A. De Santis, G.O. Delle Monache, D.G.C. Di Giulio, G. Di Pirro, A. Drago, L.G. Foggetta, A. Gallo, R. Gargana, A. Ghigo, S. Guiducci, S. Incremona, F. Iungo, C. Ligi, M. Maestri, A. Michelotti, L. Pellegrino, R. Ricci, U. Rotundo, L. Sabbatini, C. Sanelli, G. Sensolini, A. Stecchi, A. Stella, A. Vannozzi, M. Zobov INFN/LNF, Frascati (Roma), Italy G. Castorina INFN-Roma1, Rome, Italy J. Chavanne, G. Le Bec, P. Raimondi ESRF, Grenoble, France
	DAΦNE, the Frascati lepton collider working at the c.m. energy of the F resonance, continues to be a very suitable infrastructure to realize experiments aimed at studying elementary particles and nuclear physics. The motivations of this long lasting interest are related to the DAΦNE ability of increasing its performances in terms of luminosity thanks to the innovative Crab-Waist collision scheme. In this framework, a new run for the SIDDHARTA-2 experiment has been planned in the year 2019. The detector presently installed in the interaction region, KLOE-2, will be removed and a new low-beta session, equipped with new permanent magnets quadrupoles, will be installed. Diagnostics tools will be improved especially the ones used to keep under control the beam-beam interaction. The horizontal feedback in the positron ring will be potentiated in order to achieve a higher positron current. The design and development work done in view of the SIDDHARTA-2 run is presented and discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF088
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUYGBD2	A Review of DAΦNE Performances During the KLOE-2 Run	624
	C. Milardi, D. Alesini, S. Bini, O.R. Blanco-García, M. Boscolo, B. Buonomo, S. Cantarella, S. Caschera, A. D'Uffizi, A. De Santis, G.O. Delle Monache, D.G.C. Di Giulio, G. Di Pirro, A. Drago, L.G. Foggetta, A. Gallo, R. Gargana, A. Ghigo, S. Guiducci, C. Ligi, M. Maestri, A. Michelotti, L. Pellegrino, R. Ricci, U. Rotundo, A. Stecchi, A. Stella, M. Zobov INFN/LNF, Frascati (Roma), Italy
	DAΦNE, the Frascati electron-positron accelerator complex, has almost completed the last and more chanlleging period of operation for the KLOE-2 detector. In this context the performances of the collider, based on the Crab-Waist collision scheme, are reviewed and the limiting factors discussed.
	Slides TUYGBD2 [9.928 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUYGBD2
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAK023	Proposal for Using DAΦNE as Pulse Stretcher for the Linac Positron Beam	3258
	S. Guiducci, D. Alesini, M.E. Biagini, S. Bilanishvili, O.R. Blanco-García, M. Boscolo, B. Buonomo, S. Cantarella, D.G.C. Di Giulio, L.G. Foggetta, A. Gallo, A. Ghigo, L. Kankadze, C. Milardi, R. Ricci, U. Rotundo, L. Sabbatini, M. Serio, A. Stella INFN/LNF, Frascati (Roma), Italy P. Valente INFN-Roma, Roma, Italy
	The PADME experiment* proposes a search for the dark photon (A') in the e⁺e⁻ -> gamma A' process in a positron-on-target experiment, exploiting the positron beam of the DAΦNE linac at the Frascati National Laboratory. The linac could provide a number of positrons as high as 10⁹/pulse in a 200 ns pulse but the number of positrons for PADME is limited below 10⁵/pulse in order to keep the pile-up probability in the calorimeter low enough. The PADME experiment is indeed limited by the low duty factor (10e-5=200ns/20ms). An alternative proposal to use the DAΦNE positron ring as a linac pulse stretcher, by injecting each pulse into the ring and extracting it by a slow resonant extraction using the m/3 resonance, is described in this paper. This allows to distribute the positrons of a linac pulse in a much longer pulse (0.2 - 0.5 ms) increasing the duty factor up to ~ 2%. The required modifications of the DAΦNE positron transfer line and main ring are presented. A dedicate lattice for the ring has been designed and tracking of the positrons in the ring has been performed to optimize extraction parameters and give a preliminary estimate of the extracted beam characteristics. * M. Raggi et al., EPJ Web Conf. 96 (2015) 01025
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAK023
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Beam-gas Background Characterization in the FCC-ee IR

322

M. Boscolo, O.R. Blanco-García
INFN/LNF, Frascati (Roma), Italy
H. Burkhardt, R. Kersevan, M. Lueckhof
CERN, Geneva, Switzerland
F. Collamati
INFN-Roma1, Rome, Italy

The MDISim toolkit is used to evaluate and characterize the beam-gas induced background in the FCC-ee Interaction Region. MDISim allows a full characterization of this beam background source with the locations where the beam-gas scattering occurs as well as the loss points, as a function of different vacuum conditions and composition, for the nominal optics and parameters. Detailed pressure distribution profiles have been obtained running coupled synchrotron radiation and molecular flow montecarlo codes, as an input to the GEANT4 calculations. The particles hitting the pipe in the IR can be tracked in the detectors with a full Geant-4 simulation. Semi-analytic estimates for the expected rates and lifetime are also performed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF085

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF086

Proposal of an Experimental Test at DAΦNE for the Low Emittance Muon Beam Production From Positrons on Target

326

M. Boscolo, M. Antonelli, O.R. Blanco-García, S. Guiducci, A. Stella
INFN/LNF, Frascati (Roma), Italy
F. Collamati
INFN-Roma1, Rome, Italy
R. Li Voti
Sapienza University of Rome, Rome, Italy
S.M. Liuzzo, P. Raimondi
ESRF, Grenoble, France

We present in this paper the proposal of an experimental test at DAΦNE of the positron-ring-plus-target scheme foreseen in the Low EMittance Muon Accelerator. This test would be a validation of the on-going studies for LEMMA and it would be synergic with other proposals at DAΦNE after the SIDDHARTA run. We discuss the beam dynamics studies for different targets inserted in a proper location through the ring, i.e. where the beam is focused and dispersion-free. Optimization of beam parameters, thickness and material of target and optics of the target insertion are shown as well. The development of the existent diagnostic needed to test the behavior of the circulating beam is described together with the turn-by-turn measurement systems of charge, lifetime and transverse size. Measurements on the temperature and thermo-mechanical stress on the target are also under study.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF086

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF087

Muon Accumulator Ring Requirements for a Low Emittance Muon Collider from Positrons on Target

330

M. Boscolo, M. Antonelli, O.R. Blanco-García, S. Guiducci
INFN/LNF, Frascati (Roma), Italy
F. Collamati
INFN-Roma1, Rome, Italy
L. Keller
SLAC, Menlo Park, California, USA
S.M. Liuzzo, P. Raimondi
ESRF, Grenoble, France
D. Schulte
CERN, Geneva, Switzerland

Very low emittance muon beams can be produced by direct annihilation of about 45~GeV positrons on atomic electrons in a thin target. With such a muon beam source, a mu+mu- collider can be designed in the multi-TeV range at very high luminosities. In this scheme two muon accumulator rings are foreseen to recollect the muon bunches that will be injected in the collider. We present in this paper the first consideration of the muon accumulator rings. Realistic muon beam emittance and energy spread coming from the muon target are described. Constraints on the accumulator ring requirements are derived.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF087

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF088

Preparation Activity for the Siddharta-2 Run at DAΦNE

334

C. Milardi, D. Alesini, S. Bini, O.R. Blanco-García, M. Boscolo, B. Buonomo, S. Cantarella, S. Caschera, A. D'Uffizi, A. De Santis, G.O. Delle Monache, D.G.C. Di Giulio, G. Di Pirro, A. Drago, L.G. Foggetta, A. Gallo, R. Gargana, A. Ghigo, S. Guiducci, S. Incremona, F. Iungo, C. Ligi, M. Maestri, A. Michelotti, L. Pellegrino, R. Ricci, U. Rotundo, L. Sabbatini, C. Sanelli, G. Sensolini, A. Stecchi, A. Stella, A. Vannozzi, M. Zobov
INFN/LNF, Frascati (Roma), Italy
G. Castorina
INFN-Roma1, Rome, Italy
J. Chavanne, G. Le Bec, P. Raimondi
ESRF, Grenoble, France

DAΦNE, the Frascati lepton collider working at the c.m. energy of the F resonance, continues to be a very suitable infrastructure to realize experiments aimed at studying elementary particles and nuclear physics. The motivations of this long lasting interest are related to the DAΦNE ability of increasing its performances in terms of luminosity thanks to the innovative Crab-Waist collision scheme. In this framework, a new run for the SIDDHARTA-2 experiment has been planned in the year 2019. The detector presently installed in the interaction region, KLOE-2, will be removed and a new low-beta session, equipped with new permanent magnets quadrupoles, will be installed. Diagnostics tools will be improved especially the ones used to keep under control the beam-beam interaction. The horizontal feedback in the positron ring will be potentiated in order to achieve a higher positron current. The design and development work done in view of the SIDDHARTA-2 run is presented and discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF088

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUYGBD2

A Review of DAΦNE Performances During the KLOE-2 Run

624

C. Milardi, D. Alesini, S. Bini, O.R. Blanco-García, M. Boscolo, B. Buonomo, S. Cantarella, S. Caschera, A. D'Uffizi, A. De Santis, G.O. Delle Monache, D.G.C. Di Giulio, G. Di Pirro, A. Drago, L.G. Foggetta, A. Gallo, R. Gargana, A. Ghigo, S. Guiducci, C. Ligi, M. Maestri, A. Michelotti, L. Pellegrino, R. Ricci, U. Rotundo, A. Stecchi, A. Stella, M. Zobov
INFN/LNF, Frascati (Roma), Italy

DAΦNE, the Frascati electron-positron accelerator complex, has almost completed the last and more chanlleging period of operation for the KLOE-2 detector. In this context the performances of the collider, based on the Crab-Waist collision scheme, are reviewed and the limiting factors discussed.

Slides TUYGBD2 [9.928 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUYGBD2

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAK023

Proposal for Using DAΦNE as Pulse Stretcher for the Linac Positron Beam

3258

S. Guiducci, D. Alesini, M.E. Biagini, S. Bilanishvili, O.R. Blanco-García, M. Boscolo, B. Buonomo, S. Cantarella, D.G.C. Di Giulio, L.G. Foggetta, A. Gallo, A. Ghigo, L. Kankadze, C. Milardi, R. Ricci, U. Rotundo, L. Sabbatini, M. Serio, A. Stella
INFN/LNF, Frascati (Roma), Italy
P. Valente
INFN-Roma, Roma, Italy

The PADME experiment* proposes a search for the dark photon (A') in the e⁺e⁻ -> gamma A' process in a positron-on-target experiment, exploiting the positron beam of the DAΦNE linac at the Frascati National Laboratory. The linac could provide a number of positrons as high as 10⁹/pulse in a 200 ns pulse but the number of positrons for PADME is limited below 10⁵/pulse in order to keep the pile-up probability in the calorimeter low enough. The PADME experiment is indeed limited by the low duty factor (10e-5=200ns/20ms). An alternative proposal to use the DAΦNE positron ring as a linac pulse stretcher, by injecting each pulse into the ring and extracting it by a slow resonant extraction using the m/3 resonance, is described in this paper. This allows to distribute the positrons of a linac pulse in a much longer pulse (0.2 - 0.5 ms) increasing the duty factor up to ~ 2%. The required modifications of the DAΦNE positron transfer line and main ring are presented. A dedicate lattice for the ring has been designed and tracking of the positrons in the ring has been performed to optimize extraction parameters and give a preliminary estimate of the extracted beam characteristics.
* M. Raggi et al., EPJ Web Conf. 96 (2015) 01025

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAK023

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)