IPAC2018 - List of Authors (Blaskiewicz, M.)

Paper	Title	Page
MOPMF011	Beam-Beam Issues With Two Interaction Points in eRHIC	102
	Y. Luo, M. Blaskiewicz, A. He, C. Montag, V. Ptitsyn BNL, Upton, Long Island, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. In this article, we study the beam-beam interaction related issues with two interaction points in the current eRHIC ring-ring design. We carried out strong-strong beam-beam simulation in a 2-d bunch intensity scan. We observed coherent beam-beam instability and emittance blowup with 2 collisions per turn at lower bunch intensities than the case with only 1 collision per turn. To deliver collisions to the two experiments simultaneously, we proposed a new bunch filling pattern to avoid 2 collisions per turn for any electron or proton bunch. We proved that the parasitic beam-beam effect with the new bunch filling pattern is negligible.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF011
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF012	Study of Crabbed Collision in eRHIC With a Combination of Strong-Strong and Weak-Strong Simulations	105
	Y. Luo, G. Bassi, M. Blaskiewicz, W. Fischer, Y. Hao, C. Montag, V. Ptitsyn, V.V. Smaluk, F.J. Willeke BNL, Upton, Long Island, New York, USA J. Qiang LBNL, Berkeley, California, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. In the present design of the future electron-ion collider eRHIC at the Brookhaven National Laboratory, a crossing angle of 22~mrad between the electron and proton orbits at the interaction region is adopted. To compensate the geometric luminosity loss, a local compensation scheme with two sets of crab cavities for each beam is considered. In this article, we first carry out strong-strong beam-beam simulation to study possible coherent beam-beam instability. Under the assumption of no coherent beam-beam motion, we then carry out a weak-strong beam-beam simulation to determine the long-term stability of the proton beam with the equilibrium electron beam sizes extracted from the strong-strong beam-beam simulation.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF012
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF016	Progress on RCS eRHIC Injector Design	115
	V.H. Ranjbar, M. Blaskiewicz, J.M. Brennan, S.J. Brooks, D.M. Gassner, H.-C. Hseuh, I. Marneris, F. Méot, M.G. Minty, C. Montag, V. Ptitsyn, K.S. Smith, S. Tepikian, F.J. Willeke, H. Witte, B. P. Xiao, A. Zaltsman BNL, Upton, Long Island, New York, USA I.V. Pogorelov Tech-X, Boulder, Colorado, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. We have refined the design for the Rapid Cycling Synchrotron (RCS) polarized electron injector for eRHIC. The newer design includes bypasses for the eRHIC detectors and definition of the lattice layout in the existing RHIC tunnel. Additionally, we provide more details on the RF, alignment and orbit control, and magnet specifications.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF016
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUYGBD3	eRHIC Design Status	628
	V. Ptitsyn, G. Bassi, J. Beebe-Wang, J.S. Berg, M. Blaskiewicz, A. Blednykh, J.M. Brennan, S.J. Brooks, K.A. Brown, K.A. Drees, A.V. Fedotov, W. Fischer, D.M. Gassner, W. Guo, Y. Hao, A. Hershcovitch, H. Huang, W.A. Jackson, J. Kewisch, C. Liu, H. Lovelace III, Y. Luo, F. Méot, M.G. Minty, C. Montag, R.B. Palmer, B. Parker, S. Peggs, V.H. Ranjbar, G. Robert-Demolaize, S. Seletskiy, V.V. Smaluk, K.S. Smith, S. Tepikian, P. Thieberger, D. Trbojevic, N. Tsoupas, W.-T. Weng, F.J. Willeke, H. Witte, Q. Wu, W. Xu, A. Zaltsman, W. Zhang BNL, Upton, Long Island, New York, USA E. Gianfelice-Wendt Fermilab, Batavia, Illinois, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. The electron-ion collider eRHIC aims at a luminosity around 10³⁴cm^-2sec^-1, using strong cooling of the hadron beam. Since the required cooling techniques are not yet readily available, an initial version with a peak luminosity of 3*10³³cm^-2sec^-1 is being developed that can later be outfitted with strong hadron cooling. We will report on the current design status and the envisioned path towards 10³⁴cm^-2sec^-1 luminosity.
	Slides TUYGBD3 [11.790 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUYGBD3
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMF027	Impedance Modeling for eRHIC	1309
	A. Blednykh, G. Bassi, M. Blaskiewicz, C. Hetzel, V. Ptitsyn, V.V. Smaluk, F.J. Willeke BNL, Upton, Long Island, New York, USA
	Funding: Work supported by the US DOE under contract number DE-SC0012704 The impedance budget for the eRHIC project is discussed at its earlier stage of development. As a first step, with the eRHIC lattice and beam parameters , we use the geometric impedances of the vacuum chamber components simulated for the NSLS-II project. The impedance budged will be updated next with more impedance data simulated for the optimized eRHIC vacuum components. It will allows us to keep track on the collective effects changes with more realistic components added to the ring.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF027
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMF032	RF Conceptual Design of Normal Conducting Cavity for an eRHIC Rapid Cycling Synchrotron	1316
	B. P. Xiao, M. Blaskiewicz, J.M. Brennan, D. Holmes, K.S. Smith, T. Xin, A. Zaltsman BNL, Upton, Long Island, New York, USA
	Funding: Work is supported by Brookhaven Science Associates, LLC under contract No. DE-AC02-98CH10886 with the US DOE. The Rapid Cycling Synchrotron (RCS) for the eRHIC Ring-Ring design will provide on energy injection (up to 18 GeV) of high charge, polarized electron bunches to the eRHIC electron storage ring. The RF system comprises a large number of 563MHz fundamental cavities, providing up to 45MV per turn. The cavities will operate in pulsed mode with <20% duty factor, at a repetition rate of 1 Hz. In this paper we report the conceptual RF design of the cavity.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF032
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMF020	Pulsed Systems for eRHIC Beam Injection and Extraction	2410
	W. Zhang, M. Blaskiewicz, A. Hershcovitch, C.J. Liaw, H. Lovelace III, M. Mapes, G.T. McIntyre, J.-L. Mi, C. Montag, C. Pai, V. Ptitsyn, J. Sandberg, N. Tsoupas, J.E. Tuozzolo, G.M. Wang, W.-T. Weng, F.J. Willeke, H. Witte, Q. Wu BNL, Upton, Long Island, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. The electron-ion collider eRHIC requires a variety of kickers and septa for injection and extraction of beams throughout the entire collider complex. We plan to use pulsed systems for beam injection and extraction in Electron RCS, Electron Storage Ring, and Hadron ring. In this paper, we describe the pulsed systems required for beam transfer in the eRHIC Ring-Ring Pre-conceptual Design. We will outline the parameter ranges, technology choices, and opportunities for research and development in pulsed power technology.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPMF020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Beam-Beam Issues With Two Interaction Points in eRHIC

102

Y. Luo, M. Blaskiewicz, A. He, C. Montag, V. Ptitsyn
BNL, Upton, Long Island, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
In this article, we study the beam-beam interaction related issues with two interaction points in the current eRHIC ring-ring design. We carried out strong-strong beam-beam simulation in a 2-d bunch intensity scan. We observed coherent beam-beam instability and emittance blowup with 2 collisions per turn at lower bunch intensities than the case with only 1 collision per turn. To deliver collisions to the two experiments simultaneously, we proposed a new bunch filling pattern to avoid 2 collisions per turn for any electron or proton bunch. We proved that the parasitic beam-beam effect with the new bunch filling pattern is negligible.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF011

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF012

Study of Crabbed Collision in eRHIC With a Combination of Strong-Strong and Weak-Strong Simulations

105

Y. Luo, G. Bassi, M. Blaskiewicz, W. Fischer, Y. Hao, C. Montag, V. Ptitsyn, V.V. Smaluk, F.J. Willeke
BNL, Upton, Long Island, New York, USA
J. Qiang
LBNL, Berkeley, California, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
In the present design of the future electron-ion collider eRHIC at the Brookhaven National Laboratory, a crossing angle of 22~mrad between the electron and proton orbits at the interaction region is adopted. To compensate the geometric luminosity loss, a local compensation scheme with two sets of crab cavities for each beam is considered. In this article, we first carry out strong-strong beam-beam simulation to study possible coherent beam-beam instability. Under the assumption of no coherent beam-beam motion, we then carry out a weak-strong beam-beam simulation to determine the long-term stability of the proton beam with the equilibrium electron beam sizes extracted from the strong-strong beam-beam simulation.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF012

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF016

Progress on RCS eRHIC Injector Design

115

V.H. Ranjbar, M. Blaskiewicz, J.M. Brennan, S.J. Brooks, D.M. Gassner, H.-C. Hseuh, I. Marneris, F. Méot, M.G. Minty, C. Montag, V. Ptitsyn, K.S. Smith, S. Tepikian, F.J. Willeke, H. Witte, B. P. Xiao, A. Zaltsman
BNL, Upton, Long Island, New York, USA
I.V. Pogorelov
Tech-X, Boulder, Colorado, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
We have refined the design for the Rapid Cycling Synchrotron (RCS) polarized electron injector for eRHIC. The newer design includes bypasses for the eRHIC detectors and definition of the lattice layout in the existing RHIC tunnel. Additionally, we provide more details on the RF, alignment and orbit control, and magnet specifications.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF016

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUYGBD3

eRHIC Design Status

628

V. Ptitsyn, G. Bassi, J. Beebe-Wang, J.S. Berg, M. Blaskiewicz, A. Blednykh, J.M. Brennan, S.J. Brooks, K.A. Brown, K.A. Drees, A.V. Fedotov, W. Fischer, D.M. Gassner, W. Guo, Y. Hao, A. Hershcovitch, H. Huang, W.A. Jackson, J. Kewisch, C. Liu, H. Lovelace III, Y. Luo, F. Méot, M.G. Minty, C. Montag, R.B. Palmer, B. Parker, S. Peggs, V.H. Ranjbar, G. Robert-Demolaize, S. Seletskiy, V.V. Smaluk, K.S. Smith, S. Tepikian, P. Thieberger, D. Trbojevic, N. Tsoupas, W.-T. Weng, F.J. Willeke, H. Witte, Q. Wu, W. Xu, A. Zaltsman, W. Zhang
BNL, Upton, Long Island, New York, USA
E. Gianfelice-Wendt
Fermilab, Batavia, Illinois, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
The electron-ion collider eRHIC aims at a luminosity around 10³⁴cm^-2sec^-1, using strong cooling of the hadron beam. Since the required cooling techniques are not yet readily available, an initial version with a peak luminosity of 3*10³³cm^-2sec^-1 is being developed that can later be outfitted with strong hadron cooling. We will report on the current design status and the envisioned path towards 10³⁴cm^-2sec^-1 luminosity.

Slides TUYGBD3 [11.790 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUYGBD3

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMF027

Impedance Modeling for eRHIC

1309

A. Blednykh, G. Bassi, M. Blaskiewicz, C. Hetzel, V. Ptitsyn, V.V. Smaluk, F.J. Willeke
BNL, Upton, Long Island, New York, USA

Funding: Work supported by the US DOE under contract number DE-SC0012704
The impedance budget for the eRHIC project is discussed at its earlier stage of development. As a first step, with the eRHIC lattice and beam parameters , we use the geometric impedances of the vacuum chamber components simulated for the NSLS-II project. The impedance budged will be updated next with more impedance data simulated for the optimized eRHIC vacuum components. It will allows us to keep track on the collective effects changes with more realistic components added to the ring.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF027

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMF032

RF Conceptual Design of Normal Conducting Cavity for an eRHIC Rapid Cycling Synchrotron

1316

B. P. Xiao, M. Blaskiewicz, J.M. Brennan, D. Holmes, K.S. Smith, T. Xin, A. Zaltsman
BNL, Upton, Long Island, New York, USA

Funding: Work is supported by Brookhaven Science Associates, LLC under contract No. DE-AC02-98CH10886 with the US DOE.
The Rapid Cycling Synchrotron (RCS) for the eRHIC Ring-Ring design will provide on energy injection (up to 18 GeV) of high charge, polarized electron bunches to the eRHIC electron storage ring. The RF system comprises a large number of 563MHz fundamental cavities, providing up to 45MV per turn. The cavities will operate in pulsed mode with <20% duty factor, at a repetition rate of 1 Hz. In this paper we report the conceptual RF design of the cavity.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF032

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMF020

Pulsed Systems for eRHIC Beam Injection and Extraction

2410

W. Zhang, M. Blaskiewicz, A. Hershcovitch, C.J. Liaw, H. Lovelace III, M. Mapes, G.T. McIntyre, J.-L. Mi, C. Montag, C. Pai, V. Ptitsyn, J. Sandberg, N. Tsoupas, J.E. Tuozzolo, G.M. Wang, W.-T. Weng, F.J. Willeke, H. Witte, Q. Wu
BNL, Upton, Long Island, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
The electron-ion collider eRHIC requires a variety of kickers and septa for injection and extraction of beams throughout the entire collider complex. We plan to use pulsed systems for beam injection and extraction in Electron RCS, Electron Storage Ring, and Hadron ring. In this paper, we describe the pulsed systems required for beam transfer in the eRHIC Ring-Ring Pre-conceptual Design. We will outline the parameter ranges, technology choices, and opportunities for research and development in pulsed power technology.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPMF020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)