| Paper | Title | Page |
|---|---|---|
| THPMK060 | Start-to-End Simulations of the CLARA FEL Test Facility | 4430 |
|
||
| CLARA is a new FEL test facility being developed at STFC Daresbury Laboratory in the UK, aiming to deliver advanced FEL capabilities including few-cycle pulse generation and Fourier transform limited output. Commissioning is underway on the front-end (photo-injector and first linac) while the later stages are being procured and assembled. Start-to-end (S2E) simulations of the full facility are presented, including optimisation of the accelerator setup to deliver the required properties of one of the electron beam modes specified for FEL operation. FEL simulations are performed using the Genesis 1.3 and Puffin codes and the results are compared. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK060 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| THPMK063 | Photocathode Preparation and Characteristics of the Electron Source for the VELA/CLARA Facility | 4442 |
|
||
| The VELA and CLARA front end accelerators at Daresbury are test facilities with a focus on FEL research and industrial applications of electron beams. Recently the CLARA injector has been commissioned with acceleration of beam to 50 MeV. For several years a normal conducting 2.5 cell S-band cavity RF gun operated at up to 80 MV/m has been used as the electron source for both VELA and CLARA. For further beam acceleration an S-band travelling wave 2m long cavity has been used. The gun has used several different copper cathodes throughout its operational life, employing different preparation techniques. Oxygen plasma treatment is a well-known procedure for removing hydrocarbon contamination from surfaces whereas Argon plasma treatment also removes contaminants and typically leaves a thinner oxide at the surface. In this study we compare dark current (from field emission), as measured directly after the gun, for these alternate surface preparations and also present results from post-use electron microscopy analysis of the photocathodes. Electromagnetic simulations are used to help explain the results. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK063 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| THPMK105 | PERLE - Lattice Design and Beam Dynamics Studies | 4556 |
|
||
|
Funding: Work has been authored by Jefferson Science Associates, LLC under Contract No. DE-AC05-06OR23177 with the U.S. Department of Energy. PERLE (Powerful ERL for Experiments) is a novel ERL test facility, initially proposed to validate choices for a 60 GeV ERL foreseen in the design of the LHeC and the FCC-eh. Its main thrust is to probe high current, CW, multi-pass operation with superconducting cavities at 802 MHz (and perhaps testing other frequencies of interest). With very high virtual beam power (~ 10 MW), PERLE offers an opportunity for controllable study of every beam dynamic effect of interest in the next generation of ERL design; becoming a ‘stepping stone' between present state-of-art 1 MW ERLs and future 100 MW scale applications. PERLE design features Flexible Momentum Compaction lattice architecture for six vertically stacked return arcs and a high-current, 6 MeV, photo-injector. With only one pair of 4 cavity cryomodules, 400 MeV beam energy can be reached in 3 re-circulation passes, with beam currents in excess of 15 mA. The beam is decelerated in 3 consecutive passes back to the injection energy, transferring virtually stored energy back to the RF. This unique facility will serve as a test-bed for high current ERL technologies, as well as a user facility in low energy electron and photon physics. |
||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK105 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| THPMK059 | Commissioning of Front End of CLARA Facility at Daresbury Laboratory | 4426 |
|
||
| CLARA (Compact Linear Accelerator for Research and Applications) is a Free Electron Laser (FEL) test facility being developed at STFC Daresbury Laboratory. The principal aim of CLARA is to test advanced FEL schemes which can later be implemented on existing and future short wavelength FELs. The installation of the Front End (FE) section of CLARA, a S-bend merging with existing VELA (Versatile Electron Linear Accelerator) beam line and installation of a high repetition rate RF gun on VELA was completed in 2017. First beam commissioning results and high level software developments are presented in this paper. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK059 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| THPMK106 | Architectural Considerations for Recirculated and Energy-Recovered Hard XFEL Drivers | 4560 |
|
||
|
Funding: Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177. A confluence of events motivates discussion of design options for hard XFEL driver accelerators. Firstly, multiple superconducting radio-frequency (SRF) driven systems are now online (European XFEL), in construction (LCLS-II), or in design (MARIE); these provide increasing evidence of the transformational potential they offer for fundamental science with its concomitant benefits. Secondly, operation of 12 GeV CEBAF* validates use of recirculation in high energy SRF linacs. Thirdly, advances in the analysis and control of effects such as coherent synchrotron radiation (CSR) and the microbunching instability (uBI) have been recently achieved. Collectively, these developments offer insights providing extended facility science reach, reduced costs, multiplicity (i.e., support of numerous FELs operating over a range of wavelengths), and enhanced scalability and upgradability (to higher powers and energies). We will discuss the relationship amongst the various threads, and indicate how they inform design choices for the system architecture of an option for the UK-XFEL** - that of a staged multi-user X-ray FEL and nuclear physics facility based on a multi-pass recirculating SRF CW linac. *M. Spata, "12 GeV CEBAF Initial Operations and Challenges", these proceedings. **P. Williams et al., Proc. FLS2018, Shanghai, China (March 2018). |
||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK106 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |