IPAC2018 - List of Authors (Abid, I.A.)

Paper	Title	Page
WEPMF008	Preliminary Designs and Test Results of Bipolar Power Supplies for APS Upgrade Storage Ring	2381
	J. Wang, I.A. Abid, R.T. Keane, G.S. Sprau ANL, Argonne, Illinois, USA
	Funding: Work supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under Contract No. DE-AC02-06CH11357. The upgrade (APS-U) of the APS storage ring requires more than 1200 bipolar power supplies. Based on the performance requirement, the power supplies can be divided into two categories: fast bipolar power supplies for fast correctors and slow bipolar power supplies for trim coils and slow correctors. The common requirement of the power supplies is a bipolar output current up to ±15 A. The main difference is that the fast corrector power supplies require a small-signal bandwidth of 10 kHz. A prototype DC/DC power converter utilizing a MOSFET H-bridge circuit with a 500 kHz PWM was successfully developed through the R&D program, achieving the required bandwidth with less than 3-dB attenuation for a signal 0.5% of ±15 A. After the successful R&D program, the preliminary designs were performed to further improve the performance and to finalize the schematics, the PCB layouts, and the power supply constructions. The two types of the power supplies share the majority of the designs and features, with minor differences for the different bandwidth requirement. This paper presents the preliminary design, the key power supply functions and features, and the test results.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPMF008
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Preliminary Designs and Test Results of Bipolar Power Supplies for APS Upgrade Storage Ring

2381

J. Wang, I.A. Abid, R.T. Keane, G.S. Sprau
ANL, Argonne, Illinois, USA

Funding: Work supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under Contract No. DE-AC02-06CH11357.
The upgrade (APS-U) of the APS storage ring requires more than 1200 bipolar power supplies. Based on the performance requirement, the power supplies can be divided into two categories: fast bipolar power supplies for fast correctors and slow bipolar power supplies for trim coils and slow correctors. The common requirement of the power supplies is a bipolar output current up to ±15 A. The main difference is that the fast corrector power supplies require a small-signal bandwidth of 10 kHz. A prototype DC/DC power converter utilizing a MOSFET H-bridge circuit with a 500 kHz PWM was successfully developed through the R&D program, achieving the required bandwidth with less than 3-dB attenuation for a signal 0.5% of ±15 A. After the successful R&D program, the preliminary designs were performed to further improve the performance and to finalize the schematics, the PCB layouts, and the power supply constructions. The two types of the power supplies share the majority of the designs and features, with minor differences for the different bandwidth requirement. This paper presents the preliminary design, the key power supply functions and features, and the test results.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPMF008

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)