ICALEPCS2019 - List of Authors (Trudel, A.H.)

Paper	Title	Page
MOAPP02	The SPIRAL2 Control System Status Just Before the First Beam	8
	C.H. Haquin, P. Anger, P.-E. Bernaudin, C. Berthe, F. Bucaille, P. Dolegieviez, C.H. Patard, D. Touchard, A.H. Trudel, Q. Tura GANIL, Caen, France
	The SPIRAL2 Facility at GANIL is based on the construction of a superconducting LINAC (up to 5 mA - 40 MeV deuteron beams and up to 1 mA - 14.5 MeV/u heavy ion beams) with two experimental areas called S3 and NFS [1, 2]. At the end of this year, we will reach an important milestone with the first beam accelerated by the superconducting LINAC. The control system of the new facility relies on EPICS and PLC technologies. This paper will focus on the latest validated systems: machine protection system, the LINAC cryogenic system and the radio frequency system of the superconducting cavities. The validation requested a huge effort from all the teams but allow the project to be ready for this important moment.
	Slides MOAPP02 [6.262 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-MOAPP02
About •	paper received ※ 23 September 2019 paper accepted ※ 08 October 2019 issue date ※ 30 August 2020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPHA013	Programmable Logic Controller Systems for SPIRAL2	1089
	C. Berthe, F. Bucaille, G. Delavallee, G. Duteil, C. Hocini, J.-F. Rozé, A.H. Trudel, Q. Tura GANIL, Caen, France P.G. Graehling IPHC, Strasbourg Cedex 2, France R. Touzery CEA-DRF-IRFU, France
	PLC provides a large part of the SPIRAL 2 project’s commands. The SPIRAL2 project is based on a multi-beam driver in order to allow both ISOL and low-energy in-flight techniques to produce Radioactive Ion Beams (RIB). A superconducting light/heavy-ion linac with an acceleration potential of about 40 MV capable of accelerating 5 mA deuterons up to 40 MeV and 1 mA heavy ions up to 14.5 MeV/u is used to bombard both thick and thin targets. The PLCs provide vacuum control, access control, part of the machine protection system, control of the cryogenic distribution system, cooling controls, control of RF amplifiers, they are associated with the safety control system. The standards used are presented as well as the general synoptic of the PLC control system. The details of the major systems are presented, the Cryo distribution, the machine protection system, a safety system.
	Poster WEPHA013 [4.786 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-WEPHA013
About •	paper received ※ 30 September 2019 paper accepted ※ 19 October 2019 issue date ※ 30 August 2020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

The SPIRAL2 Control System Status Just Before the First Beam

8

C.H. Haquin, P. Anger, P.-E. Bernaudin, C. Berthe, F. Bucaille, P. Dolegieviez, C.H. Patard, D. Touchard, A.H. Trudel, Q. Tura
GANIL, Caen, France

The SPIRAL2 Facility at GANIL is based on the construction of a superconducting LINAC (up to 5 mA - 40 MeV deuteron beams and up to 1 mA - 14.5 MeV/u heavy ion beams) with two experimental areas called S3 and NFS [1, 2]. At the end of this year, we will reach an important milestone with the first beam accelerated by the superconducting LINAC. The control system of the new facility relies on EPICS and PLC technologies. This paper will focus on the latest validated systems: machine protection system, the LINAC cryogenic system and the radio frequency system of the superconducting cavities. The validation requested a huge effort from all the teams but allow the project to be ready for this important moment.

Slides MOAPP02 [6.262 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-MOAPP02

About •

paper received ※ 23 September 2019 paper accepted ※ 08 October 2019 issue date ※ 30 August 2020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPHA013

Programmable Logic Controller Systems for SPIRAL2

1089

C. Berthe, F. Bucaille, G. Delavallee, G. Duteil, C. Hocini, J.-F. Rozé, A.H. Trudel, Q. Tura
GANIL, Caen, France
P.G. Graehling
IPHC, Strasbourg Cedex 2, France
R. Touzery
CEA-DRF-IRFU, France

PLC provides a large part of the SPIRAL 2 project’s commands. The SPIRAL2 project is based on a multi-beam driver in order to allow both ISOL and low-energy in-flight techniques to produce Radioactive Ion Beams (RIB). A superconducting light/heavy-ion linac with an acceleration potential of about 40 MV capable of accelerating 5 mA deuterons up to 40 MeV and 1 mA heavy ions up to 14.5 MeV/u is used to bombard both thick and thin targets. The PLCs provide vacuum control, access control, part of the machine protection system, control of the cryogenic distribution system, cooling controls, control of RF amplifiers, they are associated with the safety control system. The standards used are presented as well as the general synoptic of the PLC control system. The details of the major systems are presented, the Cryo distribution, the machine protection system, a safety system.

Poster WEPHA013 [4.786 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-WEPHA013

About •

paper received ※ 30 September 2019 paper accepted ※ 19 October 2019 issue date ※ 30 August 2020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)