ICALEPCS2019 - List of Authors (Satoh, M.)

Paper	Title	Page
TUBPR04	The Fault Diagnosis of Event Timing System in SuperKEKB	741
	D. Wang Sokendai, Ibaraki, Japan K. Furukawa, H. Kaji, M. Satoh, H. Sugimura KEK, Ibaraki, Japan Y. Iitsuka EJIT, Hitachi, Ibaraki, Japan T. Kudou, S. Kusano Mitsubishi Electric System & Service Co., Ltd, Tsukuba, Japan
	Funding: Work supported China Scholarship Council The new MRF event timing system is one of the most important components to maintain the reliable and stable operation of the SuperKEKB project. This system is utilized to distribute high precision level timing signals and accompanying control instructions to synchronize different subsystems and machines. Event generator (EVG) generates signals of different beam modes every 50 Hz pulse which contains several event codes while Event receivers (EVR) receives them and output signals to dedicated devices all over the installation. To certain these events are consistent during the distribution, an event fault diagnosis system is essentially needed. An EVR based event timing diagnostic system is thus developed by modifying the driver support module to provide a log system of persistent event data as well as comparing the received event codes with the beam injector pattern, detecting the event timing interval fault and notifying the results by email every day. Then, we are able to locate the fault, analyze the data, fix bugs or replace hardware and resume accelerator operation quickly.
	Slides TUBPR04 [2.076 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-TUBPR04
About •	paper received ※ 30 September 2019 paper accepted ※ 10 October 2019 issue date ※ 30 August 2020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WECPR05	Pulsed Magnet Control System Using COTS PXIe Devices and LabVIEW	946
	Y. Enomoto, K. Furukawa, T. Natsui, M. Satoh KEK, Ibaraki, Japan H.S. Saotome Kanto Information Service (KIS), Accelerator Group, Ibaraki, Japan
	About one hundred channels of pulsed magnet power supply control system were installed in 2017 in KEK electron positron LINAC to realize pulse-to-pulse control of output current every 20 ms. The control system of a group of eight channels totally consists of commercially available devices, namely a PC (Windows 8.1), a PXIe crate and several PXIe boards such as ADC, DAC communication and timing. The software is written with LabVIEW. EPICS channel access protocol is used to communicate with OPI over standard Ethernet network. Depending on the destination of the beam, there are ten beam modes. The software is able to keep parameters for each mode independently, which makes it possible for us to operate one LINAC as if it were ten virtual LINACs. Even Software feedback to compensate small drift of output current is available for each mode independently. During two years of operation, there were no significant problem. Although the Windows is not a real-time OS, dropping rate of the trigger coming every 20 ms is less than a ppm. Rebooting of the PC or software is necessary only a few times in a year.
	Slides WECPR05 [5.799 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-WECPR05
About •	paper received ※ 29 September 2019 paper accepted ※ 20 October 2019 issue date ※ 30 August 2020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

The Fault Diagnosis of Event Timing System in SuperKEKB

741

D. Wang
Sokendai, Ibaraki, Japan
K. Furukawa, H. Kaji, M. Satoh, H. Sugimura
KEK, Ibaraki, Japan
Y. Iitsuka
EJIT, Hitachi, Ibaraki, Japan
T. Kudou, S. Kusano
Mitsubishi Electric System & Service Co., Ltd, Tsukuba, Japan

Funding: Work supported China Scholarship Council
The new MRF event timing system is one of the most important components to maintain the reliable and stable operation of the SuperKEKB project. This system is utilized to distribute high precision level timing signals and accompanying control instructions to synchronize different subsystems and machines. Event generator (EVG) generates signals of different beam modes every 50 Hz pulse which contains several event codes while Event receivers (EVR) receives them and output signals to dedicated devices all over the installation. To certain these events are consistent during the distribution, an event fault diagnosis system is essentially needed. An EVR based event timing diagnostic system is thus developed by modifying the driver support module to provide a log system of persistent event data as well as comparing the received event codes with the beam injector pattern, detecting the event timing interval fault and notifying the results by email every day. Then, we are able to locate the fault, analyze the data, fix bugs or replace hardware and resume accelerator operation quickly.

Slides TUBPR04 [2.076 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-TUBPR04

About •

paper received ※ 30 September 2019 paper accepted ※ 10 October 2019 issue date ※ 30 August 2020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WECPR05

Pulsed Magnet Control System Using COTS PXIe Devices and LabVIEW

946

Y. Enomoto, K. Furukawa, T. Natsui, M. Satoh
KEK, Ibaraki, Japan
H.S. Saotome
Kanto Information Service (KIS), Accelerator Group, Ibaraki, Japan

About one hundred channels of pulsed magnet power supply control system were installed in 2017 in KEK electron positron LINAC to realize pulse-to-pulse control of output current every 20 ms. The control system of a group of eight channels totally consists of commercially available devices, namely a PC (Windows 8.1), a PXIe crate and several PXIe boards such as ADC, DAC communication and timing. The software is written with LabVIEW. EPICS channel access protocol is used to communicate with OPI over standard Ethernet network. Depending on the destination of the beam, there are ten beam modes. The software is able to keep parameters for each mode independently, which makes it possible for us to operate one LINAC as if it were ten virtual LINACs. Even Software feedback to compensate small drift of output current is available for each mode independently. During two years of operation, there were no significant problem. Although the Windows is not a real-time OS, dropping rate of the trigger coming every 20 ms is less than a ppm. Rebooting of the PC or software is necessary only a few times in a year.

Slides WECPR05 [5.799 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-WECPR05

About •

paper received ※ 29 September 2019 paper accepted ※ 20 October 2019 issue date ※ 30 August 2020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)