ICALEPCS2019 - List of Authors (Kiyomichi, A.)

Paper	Title	Page
THAPP03	Construction of Beam Monitor Control System for Beam Transport From SACLA to SPring-8	1544
	A. Kiyomichi, N. Hosoda, M. Yamaga JASRI, Hyogo, Japan T. Fukui RIKEN SPring-8 Center, Innovative Light Sources Division, Hyogo, Japan M. Ishii JASRI/SPring-8, Hyogo-ken, Japan H. Maesaka RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan
	In a part of the SPring-8 upgrade project, the SACLA linac will be used as the injector for the SPring-8 storage ring. We will upgrade the beam monitor system for beam transport, which consists of screen monitor (SCM), beam position monitor (BPM) and current monitor (CT). For the SCM, we adopted GigE Vision standard for the CCD camera and EtherCAT as a field bus for the stepper motor control of focusing system. We have developed camera control software using open source libraries to integrate various vendors’ GigE Vision cameras with the SPring-8 control framework. A grabbed image is stored into the file server and property, such as camera settings for image and event number, is stored into the database. The BPM is a key device for precise and stable injection. We adopted the commercially available MTCA.4 fast ADC/DAC module with modified firmware developed for readout of the BPM and the CT. We are developing acquisition software for MTCA.4 modules to synchronize with a beam trigger. The acquired data are stored into the database with time stamp and event number. We present the preparation of beam monitor control system for the beam transport to injection from SACLA to SPring-8.
	Slides THAPP03 [9.593 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-THAPP03
About •	paper received ※ 01 October 2019 paper accepted ※ 09 October 2019 issue date ※ 30 August 2020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Construction of Beam Monitor Control System for Beam Transport From SACLA to SPring-8

1544

A. Kiyomichi, N. Hosoda, M. Yamaga
JASRI, Hyogo, Japan
T. Fukui
RIKEN SPring-8 Center, Innovative Light Sources Division, Hyogo, Japan
M. Ishii
JASRI/SPring-8, Hyogo-ken, Japan
H. Maesaka
RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan

In a part of the SPring-8 upgrade project, the SACLA linac will be used as the injector for the SPring-8 storage ring. We will upgrade the beam monitor system for beam transport, which consists of screen monitor (SCM), beam position monitor (BPM) and current monitor (CT). For the SCM, we adopted GigE Vision standard for the CCD camera and EtherCAT as a field bus for the stepper motor control of focusing system. We have developed camera control software using open source libraries to integrate various vendors’ GigE Vision cameras with the SPring-8 control framework. A grabbed image is stored into the file server and property, such as camera settings for image and event number, is stored into the database. The BPM is a key device for precise and stable injection. We adopted the commercially available MTCA.4 fast ADC/DAC module with modified firmware developed for readout of the BPM and the CT. We are developing acquisition software for MTCA.4 modules to synchronize with a beam trigger. The acquired data are stored into the database with time stamp and event number. We present the preparation of beam monitor control system for the beam transport to injection from SACLA to SPring-8.

Slides THAPP03 [9.593 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-THAPP03

About •

paper received ※ 01 October 2019 paper accepted ※ 09 October 2019 issue date ※ 30 August 2020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)