ICALEPCS2019 - List of Authors (Coutinho, T.M.)

Paper	Title	Page
MOPHA121	Generic Data Acquisition Interfaces and Processes in Sardana	506
	Z. Reszela, J. Andreu, T.M. Coutinho, G. Cuní, C. Falcon-Torres, D. Fernández-Carreiras, R. Homs-Puron, C. Pascual-Izarra, D. Roldán, M. Rosanes-Siscart ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain G.W. Kowalski NSRC SOLARIS, Kraków, Poland A. Milan-Otero MAX IV Laboratory, Lund University, Lund, Sweden M.T. Núñez Pardo de Vera DESY, Hamburg, Germany
	Users visiting scientific installations aim to collect the best quality data frequently under time pressure. They look for complementary techniques at different sites and when they arrive to one they have limited time to understand the data acquisition architecture. In these conditions, the availability of generic and common interfaces to the experimental channels and measurements improve the user experience regarding the programming and configuration of the experiment. Here we present solutions to the data acquisition challenges provided by the Sardana scientific SCADA suite. In one experimental session the same detector may be employed in different modes e.g., getting the data stream when aligning the sample or the stage, getting a single time/monitor controlled exposure and finally running the measurement process like a step or continuous scan. The complexity of the acquisition setup increases with the number of detectors being simultaneously used and even more depending on the applied synchronization. In this work we present recently enriched Sardana interfaces and optimized processes and conclude with the roadmap of further enhancements.
	Poster MOPHA121 [1.174 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-MOPHA121
About •	paper received ※ 30 September 2019 paper accepted ※ 10 October 2019 issue date ※ 30 August 2020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPHA058	State of the Tango Controls Kernel Development in 2019	1234
	A. Götz, R. Bourtembourg, T. Braun, J.M. Chaize, P.V. Verdier ESRF, Grenoble, France G. Abeillé SOLEIL, Gif-sur-Yvette, France M. Bartolini SKA Organisation, Macclesfield, United Kingdom T.M. Coutinho, J. Moldes ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain S. Gara NEXEYA Systems, La Couronne, France P.P. Goryl, M. Liszcz S2Innovation, Kraków, Poland V.H. Hardion MAX IV Laboratory, Lund University, Lund, Sweden A.F. Joubert SARAO, Cape Town, South Africa I. Khokhriakov, O. Merkulova IK, Moscow, Russia G.R. Mant STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom L. Pivetta Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
	This paper will present the state of of kernel developments in the Tango Controls toolkit and community since the previous ICALEPCS 2017. It will describe what changes have been made over the last 2 years to the Long Term Support (LTS) version, how GitHub has been used to provide Continuous Integration (CI) for all platforms, and prepare the latest source code release. It will present how docker containers are supported, how they are being used for CI and for building digital twins. It will describe the outcome of the kernel code camp(s). Finally it will present how Tango is preparing the next version - V10. The paper will explain why new and old installations can continue profiting from Tango Controls or in other words in Tango "the more things change the better the core concepts become".
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-WEPHA058
About •	paper received ※ 01 October 2019 paper accepted ※ 10 October 2019 issue date ※ 30 August 2020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOCPL03	Beamline Experiments at ESRF with BLISS	70
	M. Guijarro, G. Berruyer, A. Beteva, L. Claustre, T.M. Coutinho, M.C. Dominguez, P. Guillou, C. Guilloud, A. Homs, J.M. Meyer, V. Michel, P. Pancino, E. Papillon, M. Perez, S. Petitdemange, L. Pithan, F. Sever, V. Valls ESRF, Grenoble, France
	BLISS is the new ESRF beamline experiments sequencer. BLISS is a Python library, and a set of tools to empower scientists with the ability to write and to execute complex data acquisition sequences. Complementary with Tango, the ESRF control system, and silx, the ESRF data visualization toolkit, BLISS ensure a smooth user experience from beamline configuration to online visualization. After a 4-year development period, the initial deployment phase is taking place today on half of ESRF beamlines, concomitantly with the ESRF Extremely Brilliant Source upgrade program. This talk will present the BLISS project in large, focusing on feature highlights and technical information as well as more general software development considerations.
	Slides MOCPL03 [7.772 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-MOCPL03
About •	paper received ※ 30 September 2019 paper accepted ※ 02 November 2019 issue date ※ 30 August 2020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Generic Data Acquisition Interfaces and Processes in Sardana

506

Z. Reszela, J. Andreu, T.M. Coutinho, G. Cuní, C. Falcon-Torres, D. Fernández-Carreiras, R. Homs-Puron, C. Pascual-Izarra, D. Roldán, M. Rosanes-Siscart
ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
G.W. Kowalski
NSRC SOLARIS, Kraków, Poland
A. Milan-Otero
MAX IV Laboratory, Lund University, Lund, Sweden
M.T. Núñez Pardo de Vera
DESY, Hamburg, Germany

Users visiting scientific installations aim to collect the best quality data frequently under time pressure. They look for complementary techniques at different sites and when they arrive to one they have limited time to understand the data acquisition architecture. In these conditions, the availability of generic and common interfaces to the experimental channels and measurements improve the user experience regarding the programming and configuration of the experiment. Here we present solutions to the data acquisition challenges provided by the Sardana scientific SCADA suite. In one experimental session the same detector may be employed in different modes e.g., getting the data stream when aligning the sample or the stage, getting a single time/monitor controlled exposure and finally running the measurement process like a step or continuous scan. The complexity of the acquisition setup increases with the number of detectors being simultaneously used and even more depending on the applied synchronization. In this work we present recently enriched Sardana interfaces and optimized processes and conclude with the roadmap of further enhancements.

Poster MOPHA121 [1.174 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-MOPHA121

About •

paper received ※ 30 September 2019 paper accepted ※ 10 October 2019 issue date ※ 30 August 2020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPHA058

State of the Tango Controls Kernel Development in 2019

1234

A. Götz, R. Bourtembourg, T. Braun, J.M. Chaize, P.V. Verdier
ESRF, Grenoble, France
G. Abeillé
SOLEIL, Gif-sur-Yvette, France
M. Bartolini
SKA Organisation, Macclesfield, United Kingdom
T.M. Coutinho, J. Moldes
ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
S. Gara
NEXEYA Systems, La Couronne, France
P.P. Goryl, M. Liszcz
S2Innovation, Kraków, Poland
V.H. Hardion
MAX IV Laboratory, Lund University, Lund, Sweden
A.F. Joubert
SARAO, Cape Town, South Africa
I. Khokhriakov, O. Merkulova
IK, Moscow, Russia
G.R. Mant
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
L. Pivetta
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy

This paper will present the state of of kernel developments in the Tango Controls toolkit and community since the previous ICALEPCS 2017. It will describe what changes have been made over the last 2 years to the Long Term Support (LTS) version, how GitHub has been used to provide Continuous Integration (CI) for all platforms, and prepare the latest source code release. It will present how docker containers are supported, how they are being used for CI and for building digital twins. It will describe the outcome of the kernel code camp(s). Finally it will present how Tango is preparing the next version - V10. The paper will explain why new and old installations can continue profiting from Tango Controls or in other words in Tango "the more things change the better the core concepts become".

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-WEPHA058

About •

paper received ※ 01 October 2019 paper accepted ※ 10 October 2019 issue date ※ 30 August 2020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOCPL03

Beamline Experiments at ESRF with BLISS

70

M. Guijarro, G. Berruyer, A. Beteva, L. Claustre, T.M. Coutinho, M.C. Dominguez, P. Guillou, C. Guilloud, A. Homs, J.M. Meyer, V. Michel, P. Pancino, E. Papillon, M. Perez, S. Petitdemange, L. Pithan, F. Sever, V. Valls
ESRF, Grenoble, France

BLISS is the new ESRF beamline experiments sequencer. BLISS is a Python library, and a set of tools to empower scientists with the ability to write and to execute complex data acquisition sequences. Complementary with Tango, the ESRF control system, and silx, the ESRF data visualization toolkit, BLISS ensure a smooth user experience from beamline configuration to online visualization. After a 4-year development period, the initial deployment phase is taking place today on half of ESRF beamlines, concomitantly with the ESRF Extremely Brilliant Source upgrade program. This talk will present the BLISS project in large, focusing on feature highlights and technical information as well as more general software development considerations.

Slides MOCPL03 [7.772 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-MOCPL03

About •

paper received ※ 30 September 2019 paper accepted ※ 02 November 2019 issue date ※ 30 August 2020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)