JACoW logo

Joint Accelerator Conferences Website

The Joint Accelerator Conferences Website (JACoW) is an international collaboration that publishes the proceedings of accelerator conferences held around the world.

Title SLED Tuning Control System for PAL-XFEL
  • Y.J. Suh, H. Heo, H.-S. Kang, C. Kim, K.H. Kim, G. Mun, Y.J. Park
    PAL, Pohang, Republic of Korea
Abstract A total of 42 SLED Tuners are installed at the PAL-XFEL (4th generation light source) acceleration section. To adjust this, a person directly enters the Tunnels and adjusts them manually. When the SLED Tuners are equipped with a motor, it can be adjusted remotely and the intensity of the beam is also monitored while monitored while monitoring the output of the Klystron. In addition, by storing the tuning point according to the XFEL beam rate as the LVDT value, it is possible to control the SLED bar according to the beam rate changing in real time, which is helpful to provide stable beam. In order to remotely control this device, an additional motor, LVDT, and limit switch are attached. Each device is connected to the controller and can be operated and data remotely from the cab through the EPICS IOC and CSS.
Paper download WEPHA150.PDF [0.905 MB / 3 pages]
Export download ※ BibTeX LaTeXText/WordRISEndNote
Conference ICALEPCS2019
Series International Conference on Accelerator and Large Experimental Physics Control Systems (17th)
Location New York, NY, USA
Date 05-11 October 2019
Publisher JACoW Publishing, Geneva, Switzerland
Editorial Board Karen S. White (ORNL, Oak Ridge, TN, USA); Kevin A. Brown (BNL, Upton, NY, USA); Philip S. Dyer (BNL, Upton, NY, USA); Volker RW Schaa (GSI, Darmstadt, Germany)
Online ISBN 978-3-95450-209-7
Online ISSN 2226-0358
Received 26 September 2019
Accepted 10 October 2019
Issue Date 30 August 2020
DOI doi:10.18429/JACoW-ICALEPCS2019-WEPHA150
Pages 1446-1448
Creative Commons CC logoPublished by JACoW Publishing under the terms of the Creative Commons Attribution 3.0 International license. Any further distribution of this work must maintain attribution to the author(s), the published article's title, publisher, and DOI.