Author: Meigo, S.I.
Paper Title Page
TUPP032 J-PARC Test of ESS Beam on Target Diagnostics Prototypes Aperture Monitor and GRID 387
 
  • C.A. Thomas, J. Etxeberria, H. Kocevar, J.P.S. Martins, T.J. Shea
    ESS, Lund, Sweden
  • A.J. Johansson, M. Törmänen
    Lund University, Lund, Sweden
  • S.I. Meigo, M. Ooi
    JAEA/J-PARC, Tokai-mura, Japan
  • H. Niu, B. Zhang
    IMP/CAS, Lanzhou, People’s Republic of China
 
  The ESS high power beam will be delivered to the spallation target with high degree of control. To this end, we have designed a suite of instruments which provide measurement of the beam characteristics in a drift space a few meters from the target. Two of these instruments, the APTerure Monitor (APTM) and the GRID are presented. The APTM is designed to measure the fraction of beam going through the defined aperture; its time acquisition ranges from intra-pulse at µs sampling rate to many pulses over seconds. The GRID measures the projected horizontal and vertical profiles, sampling the pulse at 1MHz. A prototype of these two instruments has been designed and installed in the 3NBT dump line of J-PARC. They are designed to test functionality of these instruments in a similar environment as ESS. The 3NBT Dump line at J-PARC presents such an environment. In the second part of the paper we report the results and the measurements performed to test the prototypes. Before concluding we will discuss the results and propose improvements to the instruments final design.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-TUPP032  
About • paper received ※ 04 September 2019       paper accepted ※ 10 September 2019       issue date ※ 10 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPP031 Long Beam Pulse Extraction by the Laser Charge Exchange Method Using the 3-MeV Linac in J-Parc 595
 
  • H. Takei, K. Hirano, S.I. Meigo
    JAEA/J-PARC, Tokai-mura, Japan
  • K. Tsutsumi
    Nippon Advanced Technology Co., Ltd., Tokai, Japan
 
  The Accelerator-driven System (ADS) is one of the candidates for transmuting long-lived nuclides, such as minor actinide (MA), produced by nuclear reactors. For efficient transmutation of the MA, a precise pre-diction of neutronics of ADS is required. In order to obtain the neutronics data for the ADS, the Japan Pro-ton Accelerator Research Complex (J-PARC) has a plan to build the Transmutation Physics Experimental Facility (TEF-P), in which a 400-MeV negative proton (H) beam will be delivered from the J-PARC linac. Since the TEF-P requires a stable proton beam with a power of less than 10 W, a stable and meticulous beam extraction method is required to extract a small amount of the proton beam from the high power beam of 250 kW. To fulfil this requirement, the Laser Charge Exchange (LCE) method has been developed. To demonstrate the long beam pulse extraction using the bright continuous laser beam with a power of 196 W, we installed the LCE device at the end of a 3-MeV linac. As a result of the experiment, a charge-exchanged proton beam with a power of 0.67 W equivalent was obtained under the J-PARC linac beam condition, and this value agreed well with the theoretical value.  
poster icon Poster WEPP031 [7.256 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-WEPP031  
About • paper received ※ 04 September 2019       paper accepted ※ 09 September 2019       issue date ※ 10 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)