Paper | Title | Page |
---|---|---|
TUPP001 | KALYPSO: Linear Array Detector with Continuous Read-Out at MHz Frame Rates | 271 |
|
||
The novel linear array detector KALYPSO has been developed for beam diagnostics based on 1-dimensional profile measurements at high-repetition rate free-electron lasers (FEL) and synchrotron radiation facilities. The current version of KALYPSO has 256 pixels with a maximum frame rate of 2.7~MHz. The detector board, which comprises the radiation sensor, analog signal amplification, and analog-to-digital signal conversion, has been designed as a mezzanine card that can be plugged onto application-specific carrier boards for data pre-processing and transmission. Either a Si or InGaAs sensor can be mounted for the detection of visible or near infrared radiation. Results obtained in several beam diagnostics applications at the European XFEL and FLASH are presented to demonstrate the powerful capabilities of the KALYPSO detector.
* The KAYLYPSO detector is a collaboration between the Karlsruhe Institute of Technology, Paul Scherrer Institut, Łódź University of Technology, and Deutsches-Elektronen Synchrotron. |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-TUPP001 | |
About • | paper received ※ 04 September 2019 paper accepted ※ 07 September 2019 issue date ※ 10 November 2019 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |