Author: Ibrahim, M.A.
Paper Title Page
MOBO02 Beam Instrumentation at the Fermilab IOTA Ring 22
 
  • N. Eddy, D.R. Broemmelsiek, K. Carlson, D.J. Crawford, J.S. Diamond, D.R. Edstrom, B.J. Fellenz, M.A. Ibrahim, J.D. Jarvis, V.A. Lebedev, S. Nagaitsev, J. Ruan, J.K. Santucci, A. Semenov, V.D. Shiltsev, G. Stancari, A. Valishev, D.C. Voy, A. Warner
    Fermilab, Batavia, Illinois, USA
  • N. Kuklev, I. Lobach
    University of Chicago, Chicago, Illinois, USA
  • S. Szustkowski
    Northern Illinois University, DeKalb, Illinois, USA
 
  Funding: This manuscript has been authored by Fermi Research Alliance, LLC under Contract No. DE-AC02-07CH11359 with the U.S. Department of Energy, Office of Science, Office of High Energy Physics.
The Integrable Optics Test Accelerator (IOTA) is a storage ring at the end of the Fermilab Accelerator Science and Technology (FAST) facility. The complex is intended to support accelerator R&D for the next generation of particle accelerators. The IOTA ring is currently operating with 150 MeV electrons injected from the FAST Linac and will also receive 2.5 MeV protons from the IOTA Proon Injector currently be installed. The current instrumentation and results along from the first electron commissioning run will be presented along with future plans.
 
slides icon Slides MOBO02 [47.588 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-MOBO02  
About • paper received ※ 09 September 2019       paper accepted ※ 10 September 2019       issue date ※ 10 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPP033 Preliminary Design of Mu2E Spill Regulation System (SRS) 177
 
  • M.A. Ibrahim, E. Cullerton, J.S. Diamond, K.S. Martin, P.S. Prieto, V.E. Scarpine, P. Varghese
    Fermilab, Batavia, Illinois, USA
 
  Funding: This work was supported by the U.S. Department of Energy under contract No. DE-AC02-07CH11359.
Direct µ->e conversion requires resonant extraction of a stream of pulsed beam, comprised of short micro-bunches (pulses) from the Delivery ring (DR) to the Mu2e target. Experimental needs and radiation protection apply strict requirements on the beam quality control and regulation of the spill. The objective of the Spill Regulation System (SRS) is to maintain the intensity uniformity of a stream of ~25K pulses as 1012 protons are extracted at 590.08kHz over a 43msec spill period. To meet the specified performance, two regulation elements will be driven simultaneously: a family of three zero-harmonic quadrupoles (tune ramp quads) and a RF Knock-Out (RFKO) system. The SRS will use two separate control loops to control each regulation element simultaneously. It will be critical to coordinate the SRS¿ processes within the machine cycle and within each spill interval. The SRS has been designed to have a total Gain-Bandwidth product of 10KHz, which can be used to mitigate several sources of ripple in the spill profile.
 
poster icon Poster MOPP033 [0.522 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-MOPP033  
About • paper received ※ 30 August 2019       paper accepted ※ 08 September 2019       issue date ※ 10 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPP034 Beam Instrumentation Challenges for the Fermilab PIP-II Accelerator 181
 
  • V.E. Scarpine, N. Eddy, D. Frolov, M.A. Ibrahim, L.R. Prost, R.M. Thurman-Keup
    Fermilab, Batavia, Illinois, USA
 
  Funding: This work was supported by the U.S. Department of Energy under contract No. DE-AC02-07CH11359.
Fermilab is undertaking the development of a new 800 MeV superconducting RF linac to replace it’s present normal conducting 400 MeV linac. The PIP-II linac warm front-end consists of an ion source, LEBT, RFQ and MEBT which includes an arbitrary pattern bunch chopper, to generate a 2.1 MeV, 2mA H beam. This is followed immediately by a series of superconducting RF cryomodules to produce a 800 MeV beam. Commissioning, operate and safety present challenges to the beam instrumentation. This paper describes these beam instrumentation challenges and the choices made for PIP-II.
 
poster icon Poster MOPP034 [0.999 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-MOPP034  
About • paper received ※ 10 September 2019       paper accepted ※ 11 September 2019       issue date ※ 10 November 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)