IBIC2019 - List of Authors (Guirao, A.)

Paper	Title	Page
WEPP013	Beam Commissioning of Beam Position and Phase Monitors for LIPAc	534
	I. Podadera, D. Gavela, A. Guirao, D. Jiménez-Rey, L.M. Martínez, J. Mollá, C. Oliver, R. Varela, V. Villamayor CIEMAT, Madrid, Spain T. Akagi, K. Kondo, Y. Shimosaki, T. Shinya, M. Sugimoto QST, Aomori, Japan L. Bellan, M. Comunian, F. Grespan, F. Scantamburlo INFN/LNL, Legnaro (PD), Italy P. Cara IFMIF/EVEDA, Rokkasho, Japan Y. Carin, H. Dzitko, D. Gex, A. Jokinen, I.M. Moya F4E, Germany A. Marqueta Fusion for Energy, Garching, Germany A. Rodríguez Páramo ESS Bilbao, Zamudio, Spain
	Funding: Work partially supported by the Spanish Ministry of Science and Innovation under project AIC-A-2011-0654 and FIS2013-40860-R The LIPAc accelerator is 9-MeV, 125-mA CW deuteron accelerator that aims to validate the technology that will be used in the future IFMIF accelerator (40-MeV, 2 x 125-mA CW). LIPAc is presently under beam commissioning of the second acceleration stage (injector and Radio Frequency Quadrupole) at 5 MeV. In this stage two types of BPM¿s are used: four stripline-type to control the transverse position and phase at the Medium Energy Beam Transport line (MEBT), and three other stripline-type mainly for the precise measurements of the mean beam energy at the Diagnostics Plate. All the BPM¿s have been successfully tested and served to increase the duty cycle and the average power of the beam delivered down to the beam dump. Moreover, the BPM¿s were key devices for the transverse beam positioning and longitudinal beam tuning and validation of the RFQ and re-buncher cavities at the MEBT. In this contribution, an overview of the beam position monitors system installation and characterization in the facility will be reported. First tests of the system with the upgraded acquisition electronics for the next phase will be also presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-WEPP013
About •	paper received ※ 04 September 2019 paper accepted ※ 09 September 2019 issue date ※ 10 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Beam Commissioning of Beam Position and Phase Monitors for LIPAc

534

I. Podadera, D. Gavela, A. Guirao, D. Jiménez-Rey, L.M. Martínez, J. Mollá, C. Oliver, R. Varela, V. Villamayor
CIEMAT, Madrid, Spain
T. Akagi, K. Kondo, Y. Shimosaki, T. Shinya, M. Sugimoto
QST, Aomori, Japan
L. Bellan, M. Comunian, F. Grespan, F. Scantamburlo
INFN/LNL, Legnaro (PD), Italy
P. Cara
IFMIF/EVEDA, Rokkasho, Japan
Y. Carin, H. Dzitko, D. Gex, A. Jokinen, I.M. Moya
F4E, Germany
A. Marqueta
Fusion for Energy, Garching, Germany
A. Rodríguez Páramo
ESS Bilbao, Zamudio, Spain

Funding: Work partially supported by the Spanish Ministry of Science and Innovation under project AIC-A-2011-0654 and FIS2013-40860-R
The LIPAc accelerator is 9-MeV, 125-mA CW deuteron accelerator that aims to validate the technology that will be used in the future IFMIF accelerator (40-MeV, 2 x 125-mA CW). LIPAc is presently under beam commissioning of the second acceleration stage (injector and Radio Frequency Quadrupole) at 5 MeV. In this stage two types of BPM¿s are used: four stripline-type to control the transverse position and phase at the Medium Energy Beam Transport line (MEBT), and three other stripline-type mainly for the precise measurements of the mean beam energy at the Diagnostics Plate. All the BPM¿s have been successfully tested and served to increase the duty cycle and the average power of the beam delivered down to the beam dump. Moreover, the BPM¿s were key devices for the transverse beam positioning and longitudinal beam tuning and validation of the RFQ and re-buncher cavities at the MEBT. In this contribution, an overview of the beam position monitors system installation and characterization in the facility will be reported. First tests of the system with the upgraded acquisition electronics for the next phase will be also presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-WEPP013

About •

paper received ※ 04 September 2019 paper accepted ※ 09 September 2019 issue date ※ 10 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)