IBIC2018 - List of Authors (Schlott, V.)

Paper	Title	Page
WEOC01	Summary of Emittance Measurements Workshop for SLS and FELs
	U. Iriso ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain F. Ewald ESRF, Grenoble, France G. Kube, K. Wittenburg DESY, Hamburg, Germany T.M. Mitsuhashi KEK, Ibaraki, Japan V. Schlott PSI, Villigen PSI, Switzerland
	Funding: This project has received funding from the EU Horizon 2020 Research and Innovation programme, under Grant Agreement No 730871. In January 2018, a Topical Workshop on Emittance Measurements for Synchrotron Light Sources and FELs was held at ALBA inside the ARIES network. This talk will summarize the state of the art of the different emittance measurements techniques for these type of accelerators, and will present the relevant topics shown during the workshop.
	Slides WEOC01 [4.723 MB]
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPA20	First Results From the Bunch Arrival-Time Monitors at SwissFEL	420
	V.R. Arsov, P. Chevtsov, S. Hunziker, M.G. Kaiser, D. Llorente Sancho, A. Romann, V. Schlott, M. Stadler, D.M. Treyer PSI, Villigen PSI, Switzerland M. Dach Dach Consulting GmbH, Brugg, Switzerland
	Two Bunch Arrival-Time Monitors (BAM), based on fiber optical Mach-Zehnder intensity modulators, which encode the arrival-time information in the amplitude of the laser pulses delivered through a highly stable pulsed optical reference distribution system, have been commissioned and are operational at SwissFEL. The first BAM is at the RF-Gun, the second one is downstream the first bunch compressor. Both BAMs operate simultaneously and measure the arrival-time drift and jitter with less than 5 fs resolution. For the first time we have experimentally verified the excellent SwissFEL bunch stability. We have developed concepts and tested hardware, which enhance the commissioning and user operation. In particular we have successfully tested a tool for fast timing overlap between the electron bunch and the reference laser pulse, which allows fast system set-up and characterization. We have verified the capability for 2-bunch and 100 Hz operation. In comparison to the prototype detectors, which were operational at the SwissFEL test injector, we have achieved an improved BAM resolution in the range 10 pC - 200 pC.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2018-WEPA20
About •	paper received ※ 05 September 2018 paper accepted ※ 11 September 2018 issue date ※ 29 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

WEOC01

Summary of Emittance Measurements Workshop for SLS and FELs

U. Iriso
ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
F. Ewald
ESRF, Grenoble, France
G. Kube, K. Wittenburg
DESY, Hamburg, Germany
T.M. Mitsuhashi
KEK, Ibaraki, Japan
V. Schlott
PSI, Villigen PSI, Switzerland

Funding: This project has received funding from the EU Horizon 2020 Research and Innovation programme, under Grant Agreement No 730871.
In January 2018, a Topical Workshop on Emittance Measurements for Synchrotron Light Sources and FELs was held at ALBA inside the ARIES network. This talk will summarize the state of the art of the different emittance measurements techniques for these type of accelerators, and will present the relevant topics shown during the workshop.

Slides WEOC01 [4.723 MB]

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPA20

First Results From the Bunch Arrival-Time Monitors at SwissFEL

420

V.R. Arsov, P. Chevtsov, S. Hunziker, M.G. Kaiser, D. Llorente Sancho, A. Romann, V. Schlott, M. Stadler, D.M. Treyer
PSI, Villigen PSI, Switzerland
M. Dach
Dach Consulting GmbH, Brugg, Switzerland

Two Bunch Arrival-Time Monitors (BAM), based on fiber optical Mach-Zehnder intensity modulators, which encode the arrival-time information in the amplitude of the laser pulses delivered through a highly stable pulsed optical reference distribution system, have been commissioned and are operational at SwissFEL. The first BAM is at the RF-Gun, the second one is downstream the first bunch compressor. Both BAMs operate simultaneously and measure the arrival-time drift and jitter with less than 5 fs resolution. For the first time we have experimentally verified the excellent SwissFEL bunch stability. We have developed concepts and tested hardware, which enhance the commissioning and user operation. In particular we have successfully tested a tool for fast timing overlap between the electron bunch and the reference laser pulse, which allows fast system set-up and characterization. We have verified the capability for 2-bunch and 100 Hz operation. In comparison to the prototype detectors, which were operational at the SwissFEL test injector, we have achieved an improved BAM resolution in the range 10 pC - 200 pC.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2018-WEPA20

About •

paper received ※ 05 September 2018 paper accepted ※ 11 September 2018 issue date ※ 29 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)