HIAT2018 - List of Authors (Groening, L.)

Paper	Title	Page
TUXAA03	ROSE - a Rotating 4D Emittace Scanner	65
	M.T. Maier, L. Groening, C. Xiao GSI, Darmstadt, Germany A. Bechtold, J.M. Maus NTG Neue Technologien GmbH & Co KG, Gelnhausen, Germany
	The detector system ROSE, allowing to perform 4D emittance measurements on heavy ion beams independent of their energy and time structure, has been build and successfully commissioned in 2016 at GSI in Darmstadt, Germany. This method to measure the four dimensional emittance has then been granted a patent in 2017. The inventors together with the technology transfer department of GSI have found and industrial partner to modify ROSE into a standalone, commercially available emittance scanner system. This is a three step process involving the hardware, the electronics and the software working packages. It is planned to have a configurable customer product ready by end of 2020. In this contribution I will present the actual status and introduce the multiple possibilities of this 4D emittance scanner.
	Slides TUXAA03 [8.121 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-HIAT2018-TUXAA03
About •	paper received ※ 17 October 2018 paper accepted ※ 23 October 2018 issue date ※ 05 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEOAA02	Investigations on KONUS beam dynamics using the pre-stripper drift tube LINAC at GSI	102
	C. Xiao, X. Du, L. Groening GSI, Darmstadt, Germany
	Interdigital H-mode (IH) drift tube linacs (DTLs) based on KONUS beam dynamics are very sensitive to the rf-phases and voltages at the gaps between tubes. In order to design these DTLs, a deep understanding of the underlying longitudinal beam dynamics is mandatory. The report presents tracking simulations along an IH-DTL using the PARTRAN and BEAMPATH codes together with MATHCAD and CST. Simulation results illustrate that the beam dynamics design of the pre-stripper IH-DTL at GSI is sensitive to slight deviations of rf-phase and gap voltages with impact to the mean beam energy at the DTL exit. Applying the existing geometrical design, rf-voltages, and rf-phases of the DTL were re-adjusted. In simulations this re-optimized design can provide for more than 90% of transmission of an intense 15 emA beam keeping the reduction of beam brilliance below 25%.
	Slides WEOAA02 [2.241 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-HIAT2018-WEOAA02
About •	paper received ※ 10 October 2018 paper accepted ※ 24 October 2018 issue date ※ 05 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

ROSE - a Rotating 4D Emittace Scanner

65

M.T. Maier, L. Groening, C. Xiao
GSI, Darmstadt, Germany
A. Bechtold, J.M. Maus
NTG Neue Technologien GmbH & Co KG, Gelnhausen, Germany

The detector system ROSE, allowing to perform 4D emittance measurements on heavy ion beams independent of their energy and time structure, has been build and successfully commissioned in 2016 at GSI in Darmstadt, Germany. This method to measure the four dimensional emittance has then been granted a patent in 2017. The inventors together with the technology transfer department of GSI have found and industrial partner to modify ROSE into a standalone, commercially available emittance scanner system. This is a three step process involving the hardware, the electronics and the software working packages. It is planned to have a configurable customer product ready by end of 2020. In this contribution I will present the actual status and introduce the multiple possibilities of this 4D emittance scanner.

Slides TUXAA03 [8.121 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-HIAT2018-TUXAA03

About •

paper received ※ 17 October 2018 paper accepted ※ 23 October 2018 issue date ※ 05 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEOAA02

Investigations on KONUS beam dynamics using the pre-stripper drift tube LINAC at GSI

102

C. Xiao, X. Du, L. Groening
GSI, Darmstadt, Germany

Interdigital H-mode (IH) drift tube linacs (DTLs) based on KONUS beam dynamics are very sensitive to the rf-phases and voltages at the gaps between tubes. In order to design these DTLs, a deep understanding of the underlying longitudinal beam dynamics is mandatory. The report presents tracking simulations along an IH-DTL using the PARTRAN and BEAMPATH codes together with MATHCAD and CST. Simulation results illustrate that the beam dynamics design of the pre-stripper IH-DTL at GSI is sensitive to slight deviations of rf-phase and gap voltages with impact to the mean beam energy at the DTL exit. Applying the existing geometrical design, rf-voltages, and rf-phases of the DTL were re-adjusted. In simulations this re-optimized design can provide for more than 90% of transmission of an intense 15 emA beam keeping the reduction of beam brilliance below 25%.

Slides WEOAA02 [2.241 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-HIAT2018-WEOAA02

About •

paper received ※ 10 October 2018 paper accepted ※ 24 October 2018 issue date ※ 05 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)