FEL2019 - List of Authors (Fenner, M.)

Paper	Title	Page
WEB04	Few-Femtosecond Facility-Wide Synchronization of the European XFEL	318
	S. Schulz, M.K. Czwalinna, M. Felber, M. Fenner, C. Gerth, T. Kozak, T. Lamb, B. Lautenschlager, F. Ludwig, U. Mavrič, J. Müller, S. Pfeiffer, H. Schlarb, Ch. Schmidt, C. Sydlo, M. Titberidze, F. Zummack DESY, Hamburg, Germany
	The first facility-wide evaluation of the optical synchronization system at the European XFEL resulted in excellent arrival time stability of the electron bunches at the end of the 2 km long linac, being measured with two individual adjacent femtosecond-resolution bunch arrival time monitors. While each of the monitors is independently linked by a stabilized optical fiber to a master laser oscillator, with one being installed in the injector area and one in the experimental hall, these two reference lasers are tightly synchronized through another few-km long fiber link. Thus, not only the accelerator performance is being benchmarked, but equally the optical synchronization infrastructure itself. Stability on this level can only be achieved by locking the RF for cavity field control to the optical reference and requires an unprecedented synchronization of the master laser oscillator to the main RF oscillator, enabled by a novel RF/optical phase detector. Finally, with the seeders of the experiment’s optical lasers synchronized to the master laser oscillator, first experiments at two independent scientific instruments proved an X-ray/optical timing jitter of few tens of femtoseconds.
	Slides WEB04 [22.142 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEB04
About •	paper received ※ 20 August 2019 paper accepted ※ 28 August 2019 issue date ※ 05 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP007	Usage of the MicroTCA.4 Electronics Platform for Femtosecond Synchronization Systems	332
	M. Felber, E.P. Felber, M. Fenner, T. Kozak, T. Lamb, J. Müller, K.P. Przygoda, H. Schlarb, S. Schulz, C. Sydlo, M. Titberidze, F. Zummack DESY, Hamburg, Germany
	At the European XFEL and FLASH at DESY optical synchronization systems are installed providing sub-10 femtosecond electron bunch arrival time stability and laser oscillator synchronization to carry out time-resolved pump-probe experiments with high precision. The synchronization system supplies critical RF stations with short- and long-term phase-stable reference signals for precise RF field detection and control while bunch arrival times are processed in beam-based feedbacks to further time-stabilize the FEL pulses. Experimental lasers are tightly locked to the optical reference using balanced optical cross-correlation. In this paper, we describe the electronic hardware for supervision and real-time control of the optical synchronization system. It comprises various MicroTCA.4 modules including fast digitizers, FPGA processor boards, and drivers for piezos and stepper-motors. Advantages of the system are the high-level of integration, state-of-the-art performance, flexibility, and remote maintainability.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP007
About •	paper received ※ 20 August 2019 paper accepted ※ 26 August 2019 issue date ※ 05 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Few-Femtosecond Facility-Wide Synchronization of the European XFEL

318

S. Schulz, M.K. Czwalinna, M. Felber, M. Fenner, C. Gerth, T. Kozak, T. Lamb, B. Lautenschlager, F. Ludwig, U. Mavrič, J. Müller, S. Pfeiffer, H. Schlarb, Ch. Schmidt, C. Sydlo, M. Titberidze, F. Zummack
DESY, Hamburg, Germany

The first facility-wide evaluation of the optical synchronization system at the European XFEL resulted in excellent arrival time stability of the electron bunches at the end of the 2 km long linac, being measured with two individual adjacent femtosecond-resolution bunch arrival time monitors. While each of the monitors is independently linked by a stabilized optical fiber to a master laser oscillator, with one being installed in the injector area and one in the experimental hall, these two reference lasers are tightly synchronized through another few-km long fiber link. Thus, not only the accelerator performance is being benchmarked, but equally the optical synchronization infrastructure itself. Stability on this level can only be achieved by locking the RF for cavity field control to the optical reference and requires an unprecedented synchronization of the master laser oscillator to the main RF oscillator, enabled by a novel RF/optical phase detector. Finally, with the seeders of the experiment’s optical lasers synchronized to the master laser oscillator, first experiments at two independent scientific instruments proved an X-ray/optical timing jitter of few tens of femtoseconds.

Slides WEB04 [22.142 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEB04

About •

paper received ※ 20 August 2019 paper accepted ※ 28 August 2019 issue date ※ 05 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEP007

Usage of the MicroTCA.4 Electronics Platform for Femtosecond Synchronization Systems

332

M. Felber, E.P. Felber, M. Fenner, T. Kozak, T. Lamb, J. Müller, K.P. Przygoda, H. Schlarb, S. Schulz, C. Sydlo, M. Titberidze, F. Zummack
DESY, Hamburg, Germany

At the European XFEL and FLASH at DESY optical synchronization systems are installed providing sub-10 femtosecond electron bunch arrival time stability and laser oscillator synchronization to carry out time-resolved pump-probe experiments with high precision. The synchronization system supplies critical RF stations with short- and long-term phase-stable reference signals for precise RF field detection and control while bunch arrival times are processed in beam-based feedbacks to further time-stabilize the FEL pulses. Experimental lasers are tightly locked to the optical reference using balanced optical cross-correlation. In this paper, we describe the electronic hardware for supervision and real-time control of the optical synchronization system. It comprises various MicroTCA.4 modules including fast digitizers, FPGA processor boards, and drivers for piezos and stepper-motors. Advantages of the system are the high-level of integration, state-of-the-art performance, flexibility, and remote maintainability.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-FEL2019-WEP007

About •

paper received ※ 20 August 2019 paper accepted ※ 26 August 2019 issue date ※ 05 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)