Cyclotrons2019 - List of Authors (Guan, L.L.)

Paper	Title	Page
MOP010	A 50 MeV Proton Beam Line Design	45
	S.M. Wei, S. An, L.L. Guan, Y.L. Lv CIAE, Beijing, People’s Republic of China
	The cyclotron Center at the China Institute of Atomic Energy (CIAE) is now developing a medium-energy proton irradiation device that provides a proton beam with an energy range of 30 MeV to 50 MeV to simulate a space proton radiation environment, which has a significant impact on spacecraft. A beam transport line is designed for irradiation effect study based on the 50 MeV compact cyclotron, which requires continuous adjustment of the beam energy and the beam spot on the target requires high uniformity. The proton beam extracted from the cyclotron is adjusted to the energy required by using the degrader, then the proton beam is bended and focused. In order to obtain uniform large-diameter beam spot on the target, a wobbling magnet is installed on the beam line to uniformly sweep the proton beam on the target and finally obtain the proton beam with energy of 30 MeV - 50 MeV, current of 10 uA and beam spot of 20 cm * 20 cm on the target.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-Cyclotrons2019-MOP010
About •	paper received ※ 15 September 2019 paper accepted ※ 26 September 2019 issue date ※ 20 June 2020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

A 50 MeV Proton Beam Line Design

45

S.M. Wei, S. An, L.L. Guan, Y.L. Lv
CIAE, Beijing, People’s Republic of China

The cyclotron Center at the China Institute of Atomic Energy (CIAE) is now developing a medium-energy proton irradiation device that provides a proton beam with an energy range of 30 MeV to 50 MeV to simulate a space proton radiation environment, which has a significant impact on spacecraft. A beam transport line is designed for irradiation effect study based on the 50 MeV compact cyclotron, which requires continuous adjustment of the beam energy and the beam spot on the target requires high uniformity. The proton beam extracted from the cyclotron is adjusted to the energy required by using the degrader, then the proton beam is bended and focused. In order to obtain uniform large-diameter beam spot on the target, a wobbling magnet is installed on the beam line to uniformly sweep the proton beam on the target and finally obtain the proton beam with energy of 30 MeV - 50 MeV, current of 10 uA and beam spot of 20 cm * 20 cm on the target.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-Cyclotrons2019-MOP010

About •

paper received ※ 15 September 2019 paper accepted ※ 26 September 2019 issue date ※ 20 June 2020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)