Cyclotrons2019 - List of Authors (Calabretta, L.)

Paper	Title	Page
MOP001	Design and Commissioning of RF System for SC200 Cyclotron	21
	G. Chen, C. Chao, Y. Chen, K.Z. Ding, G. Liu, X.Y. Long, Z. Peng, Y. Song, C. Yu, X. Zhang, Y. Zhao ASIPP, Hefei, People’s Republic of China L. Calabretta, A.C. Caruso INFN/LNS, Catania, Italy O. Karamyshev JINR/DLNP, Dubna, Moscow region, Russia G.A. Karamysheva, G. Shirkov JINR, Dubna, Moscow Region, Russia
	The SC200 proton therapy superconducting cyclotron is currently under construction by ASIPP (Hefei, China) and JINR (Dubna, Russia). The radio frequency (RF) system which provides an accelerating electric field for the particles, has been designed and tested in a high-power commissioning. The RF system consists of RF cavity, Low-level RF control system, RF source, transmission network and so on. The main performances of RF cavity meet design and use requirements in the cold test. The RF cavity achieved with an unload Q factor of 5200 at the resonant frequency of 91.5 MHz, 60 kV (Center)~120 kV (Extraction) accelerating voltage and coupling state of S11 <-30 dB. The low-level RF (LLRF) system has been tested with an amplitude stability of <0.2% and a phase stability of <0.1 degree in the high-power commissioning. What is more, the cavity operated in a ~50 kW continuous wave state after 4 weeks RF conditioning. Some risks have exposed at higher power test, but related solutions and improvements have been developed. In future work, the target of RF system is effective operation under the overall assembly of cyclotron after further optimization and RF conditioning.
	Poster MOP001 [0.720 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-Cyclotrons2019-MOP001
About •	paper received ※ 09 September 2019 paper accepted ※ 24 September 2019 issue date ※ 20 June 2020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOP002	Recent Progress on Ion Source of SC200 Cyclotron	24
	Y. Zhao, G. Chen ASIPP, Hefei, People’s Republic of China L. Calabretta INFN/LNS, Catania, Italy O. Karamyshev JINR/DLNP, Dubna, Moscow region, Russia G.A. Karamysheva, G. Shirkov JINR, Dubna, Moscow Region, Russia S.W. Xu USTC, Hefei, Anhui, People’s Republic of China
	Funding: National Natural Science Foundation of China under grant No. 11775258 & 11575237 and International Scientific and Technological Cooperation Project of Anhui (grant No. 1704e1002207). A 200MeV compact superconducting cyclotron, named SC200, for proton therapy is under development by collaboration of ASIPP (Hefei, China) and JINR (Dubna, Russia). The ion source is a significant subsystem of the cyclotron. A hot cathode internal ion source has been designed and tested for SC200 cyclotron. The ion source has been successfully arc discharged on the test bench. The extracted beam current has been measured over 100 uA and filament lifetime of ion source exceeded 100 h, which indicated that the ion source meets the design requirements. The stability of the filament under strong magnetic field has also been tested and the differences between the two kinds of filament are compared.
	Poster MOP002 [0.519 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-Cyclotrons2019-MOP002
About •	paper received ※ 09 September 2019 paper accepted ※ 24 September 2019 issue date ※ 20 June 2020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOP013	Mechanical Modifications of the Median Plane for the Superconducting Cyclotron Upgrade	51
	G. Gallo, L. Allegra, L. Calabretta, A.C. Caruso, G. Costa, E. Messina, M.S. Musumeci, D. Rifuggiato, E. Zappalà INFN/LNS, Catania, Italy
	The Superconducting Cyclotron (CS) is a three sectors, compact accelerator with a wide operating diagram, capable of accelerating heavy ions with q/A from 0.1 to 0.5 up to energies from 2 to 100 MeV/u. Recently a significant upgrade has been proposed to increase the light ion beam intensity by means of extraction by stripping. For the implementation of the new extraction mode, many relevant modifications are needed in the median plane. The biggest upgrade action is the replacement of the present superconducting magnet with a new one, compatible with the beam trajectory and envelope in the extraction by stripping. The extraction by stripping mode implies the installation of two stripper systems, one in a hill and the other in a valley, that allow to extract all the ions requested by the users. Finally, since the present electrostatic extraction mode will be maintained, several relevant mechanical issues have to be faced when switching from one extraction mode to the other one, the location of one electrostatic deflector being the same as the stripper system. The focus of this paper will be the presentation of the different mechanical features involved in the upgrade.
	Poster MOP013 [1.583 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-Cyclotrons2019-MOP013
About •	paper received ※ 12 September 2019 paper accepted ※ 24 September 2019 issue date ※ 20 June 2020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOP014	3D Magnetic Optimization of the New Extraction Channel for the LNS Superconducting Cyclotron	54
	L. Neri, L. Allegra, L. Calabretta, G. Costa, G. D’Agostino, G. Gallo, D. Rifuggiato, A.D. Russo, G. Torrisi INFN/LNS, Catania, Italy
	The upgrade of the Superconducting Cyclotron operating at INFN-LNS is the main objective of the general upgrade of the LNS facility, consisting in the enhancement of light ion beam intensity. To overcome the present maximum power of 100 W of the beam extracted by electrostatic deflector and achieve a beam power as high as 10 kW, the implementation of the extraction by stripping method has been proposed. Intense ion beams with mass in the range 10 to 40 amu (12C, 18O, 20Ne, 40Ar) in the energy range of interest (15-70 MeV/u) will be delivered to the NUMEN experiment, as well as used for production of in-flight radioactive beams. The present work consists in the optimization of the magnetic channels needed to limit the radial and axial beam envelopes. The design of the magnetic channels has been accomplished by fully three-dimensional magneto-static simulations using Comsol Multiphysics and a custom transport code developed in Matlab along the last year at INFN-LNS. The effect of a magnetic shielding structure in the extraction channel is presented, together with the possibility of producing a magnetic gradient from an asymmetric coil.
	Poster MOP014 [2.968 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-Cyclotrons2019-MOP014
About •	paper received ※ 15 September 2019 paper accepted ※ 24 September 2019 issue date ※ 20 June 2020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP011	Upgrade of the Central Region of the Superconducting Cyclotron at INFN-LNS	177
	G. D’Agostino, L. Calabretta, D. Rifuggiato INFN/LNS, Catania, Italy W.J.G.M. Kleeven IBA, Louvain-la-Neuve, Belgium
	The Superconducting Cyclotron (CS) at INFN-LNS is regularly operated with beam power up to 100 W. The present efforts in upgrading the cyclotron are directed towards an increase of beam power up to 10 kW for ions with mass number A < 40 and energies between 15 and 70 AMeV by means of increase of beam intensity. Moreover, a beam energy resolution of 0.1% is requested by the NUMEN project at INFN-LNS. We plan to achieve high beam power by increasing the efficiency of the injection and extraction processes. The current extraction efficiency is lower than 60%. We expect to increase it to a value close to 100% by extracting the specific ion beams by stripping and no longer by electrostatic deflectors. A spiral inflector is used to bent onto the median plane the ion beams produced by the two ECR ion sources. Including the effect of a drift buncher placed in the axial injection line, the current injection efficiency is about 15%. The study of an upgraded CS central region is ongoing at INFN-LNS. First results of simulation study aimed to increase the injection efficiency are presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-Cyclotrons2019-TUP011
About •	paper received ※ 14 September 2019 paper accepted ※ 25 September 2019 issue date ※ 20 June 2020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEA02	The Developments of the RF System Related to the K-800 Superconducting Cyclotron Upgrade	262
	A.C. Caruso, L. Calabretta, G. Costa, G. Gallo, A. Longhitano, D. Rifuggiato, A. Spartà, G. Torrisi, E. Zappalà INFN/LNS, Catania, Italy
	The K-800 superconducting cyclotron has been in operation at Laboratori Nazionali del Sud for almost 25 years. It has been subjected to continuous upgrades and modifications since 1994: the RF couplers have been redesigned, the new dees have been changed from aluminium to copper, as has the new central region from radial to axial injection of the beam, the hybrid configuration solid state - tube of the power amplifiers, the digital LLRF, etc. The next scheduled important upgrade of the Cyclotron mainly consists in a new extraction beam line able to support the increase of the beam current intensity. The accelerated beam will be extracted in two ways: by stripper and by electrostatic deflector and, consequently, one of the most important features of the new upgrade is the new cryostat. Further upgrades and refurbishments of the other main parts of the cyclotron, such as a new liner, the modification of the RF cavities and dees, the refurbishment of HLRF-LLRF, the insertion of the stripper extraction system, to name but a few, are in progress, too. This work focuses on the RF system upgrade.
	Slides WEA02 [10.816 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-Cyclotrons2019-WEA02
About •	paper received ※ 15 September 2019 paper accepted ※ 25 September 2019 issue date ※ 20 June 2020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THB01	Review of High Power Cyclotrons and Their Applications	289
	L. Calabretta, D. Rifuggiato INFN/LNS, Catania, Italy M. Maggiore INFN/LNL, Legnaro (PD), Italy
	An incomplete review of existing machines and of present new projects of high power cyclotrons is here presented. Both high energy and low/medium energy cyclotrons will be described. Specific requests for different fields of applications are also discussed.
	Slides THB01 [11.837 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-Cyclotrons2019-THB01
About •	paper received ※ 15 September 2019 paper accepted ※ 25 September 2019 issue date ※ 20 June 2020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRB03	3D Radio Frequency Simulation of the INFN-LNS Superconducting Cyclotron	361
	G. Torrisi, L. Allegra, L. Calabretta, A.C. Caruso, G. Costa, G. Gallo, A. Longhitano, L. Neri, D. Rifuggiato INFN/LNS, Catania, Italy
	An upgrade plan of the Superconducting Cyclotron operating at INFN-LNS is ongoing. In this paper, a 3D numerical model of the Cyclotron radio frequency cavity is presented. Simulations include the coaxial sliding shorts, liner vacuum chamber, coupler, trimming capacitor and the Dees structures. CST microwave studio software has been used for numerical computation. RF simulations are mandatory also in order to analyze the field in the beam region and evaluate the impact of different Dees geometry and eventual field asymmetries. Moreover, 3D COMSOL Multiphysics simulations have been carried out in order to couple the electromagnetic field solution to a custom beam-dynamics code developed in Matlab as a future plan. Time evolution of accelerated beam and electromagnetic field make also possible to verify the magnetic field synchronization. Experimental validation of the developed model will be also presented.
	Slides FRB03 [19.931 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-Cyclotrons2019-FRB03
About •	paper received ※ 15 September 2019 paper accepted ※ 25 September 2019 issue date ※ 20 June 2020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Design and Commissioning of RF System for SC200 Cyclotron

21

G. Chen, C. Chao, Y. Chen, K.Z. Ding, G. Liu, X.Y. Long, Z. Peng, Y. Song, C. Yu, X. Zhang, Y. Zhao
ASIPP, Hefei, People’s Republic of China
L. Calabretta, A.C. Caruso
INFN/LNS, Catania, Italy
O. Karamyshev
JINR/DLNP, Dubna, Moscow region, Russia
G.A. Karamysheva, G. Shirkov
JINR, Dubna, Moscow Region, Russia

The SC200 proton therapy superconducting cyclotron is currently under construction by ASIPP (Hefei, China) and JINR (Dubna, Russia). The radio frequency (RF) system which provides an accelerating electric field for the particles, has been designed and tested in a high-power commissioning. The RF system consists of RF cavity, Low-level RF control system, RF source, transmission network and so on. The main performances of RF cavity meet design and use requirements in the cold test. The RF cavity achieved with an unload Q factor of 5200 at the resonant frequency of 91.5 MHz, 60 kV (Center)~120 kV (Extraction) accelerating voltage and coupling state of S11 <-30 dB. The low-level RF (LLRF) system has been tested with an amplitude stability of <0.2% and a phase stability of <0.1 degree in the high-power commissioning. What is more, the cavity operated in a ~50 kW continuous wave state after 4 weeks RF conditioning. Some risks have exposed at higher power test, but related solutions and improvements have been developed. In future work, the target of RF system is effective operation under the overall assembly of cyclotron after further optimization and RF conditioning.

Poster MOP001 [0.720 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-Cyclotrons2019-MOP001

About •

paper received ※ 09 September 2019 paper accepted ※ 24 September 2019 issue date ※ 20 June 2020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOP002

Recent Progress on Ion Source of SC200 Cyclotron

24

Y. Zhao, G. Chen
ASIPP, Hefei, People’s Republic of China
L. Calabretta
INFN/LNS, Catania, Italy
O. Karamyshev
JINR/DLNP, Dubna, Moscow region, Russia
G.A. Karamysheva, G. Shirkov
JINR, Dubna, Moscow Region, Russia
S.W. Xu
USTC, Hefei, Anhui, People’s Republic of China

Funding: National Natural Science Foundation of China under grant No. 11775258 & 11575237 and International Scientific and Technological Cooperation Project of Anhui (grant No. 1704e1002207).
A 200MeV compact superconducting cyclotron, named SC200, for proton therapy is under development by collaboration of ASIPP (Hefei, China) and JINR (Dubna, Russia). The ion source is a significant subsystem of the cyclotron. A hot cathode internal ion source has been designed and tested for SC200 cyclotron. The ion source has been successfully arc discharged on the test bench. The extracted beam current has been measured over 100 uA and filament lifetime of ion source exceeded 100 h, which indicated that the ion source meets the design requirements. The stability of the filament under strong magnetic field has also been tested and the differences between the two kinds of filament are compared.

Poster MOP002 [0.519 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-Cyclotrons2019-MOP002

About •

paper received ※ 09 September 2019 paper accepted ※ 24 September 2019 issue date ※ 20 June 2020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOP013

Mechanical Modifications of the Median Plane for the Superconducting Cyclotron Upgrade

51

G. Gallo, L. Allegra, L. Calabretta, A.C. Caruso, G. Costa, E. Messina, M.S. Musumeci, D. Rifuggiato, E. Zappalà
INFN/LNS, Catania, Italy

The Superconducting Cyclotron (CS) is a three sectors, compact accelerator with a wide operating diagram, capable of accelerating heavy ions with q/A from 0.1 to 0.5 up to energies from 2 to 100 MeV/u. Recently a significant upgrade has been proposed to increase the light ion beam intensity by means of extraction by stripping. For the implementation of the new extraction mode, many relevant modifications are needed in the median plane. The biggest upgrade action is the replacement of the present superconducting magnet with a new one, compatible with the beam trajectory and envelope in the extraction by stripping. The extraction by stripping mode implies the installation of two stripper systems, one in a hill and the other in a valley, that allow to extract all the ions requested by the users. Finally, since the present electrostatic extraction mode will be maintained, several relevant mechanical issues have to be faced when switching from one extraction mode to the other one, the location of one electrostatic deflector being the same as the stripper system. The focus of this paper will be the presentation of the different mechanical features involved in the upgrade.

Poster MOP013 [1.583 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-Cyclotrons2019-MOP013

About •

paper received ※ 12 September 2019 paper accepted ※ 24 September 2019 issue date ※ 20 June 2020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOP014

3D Magnetic Optimization of the New Extraction Channel for the LNS Superconducting Cyclotron

54

L. Neri, L. Allegra, L. Calabretta, G. Costa, G. D’Agostino, G. Gallo, D. Rifuggiato, A.D. Russo, G. Torrisi
INFN/LNS, Catania, Italy

The upgrade of the Superconducting Cyclotron operating at INFN-LNS is the main objective of the general upgrade of the LNS facility, consisting in the enhancement of light ion beam intensity. To overcome the present maximum power of 100 W of the beam extracted by electrostatic deflector and achieve a beam power as high as 10 kW, the implementation of the extraction by stripping method has been proposed. Intense ion beams with mass in the range 10 to 40 amu (12C, 18O, 20Ne, 40Ar) in the energy range of interest (15-70 MeV/u) will be delivered to the NUMEN experiment, as well as used for production of in-flight radioactive beams. The present work consists in the optimization of the magnetic channels needed to limit the radial and axial beam envelopes. The design of the magnetic channels has been accomplished by fully three-dimensional magneto-static simulations using Comsol Multiphysics and a custom transport code developed in Matlab along the last year at INFN-LNS. The effect of a magnetic shielding structure in the extraction channel is presented, together with the possibility of producing a magnetic gradient from an asymmetric coil.

Poster MOP014 [2.968 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-Cyclotrons2019-MOP014

About •

paper received ※ 15 September 2019 paper accepted ※ 24 September 2019 issue date ※ 20 June 2020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP011

Upgrade of the Central Region of the Superconducting Cyclotron at INFN-LNS

177

G. D’Agostino, L. Calabretta, D. Rifuggiato
INFN/LNS, Catania, Italy
W.J.G.M. Kleeven
IBA, Louvain-la-Neuve, Belgium

The Superconducting Cyclotron (CS) at INFN-LNS is regularly operated with beam power up to 100 W. The present efforts in upgrading the cyclotron are directed towards an increase of beam power up to 10 kW for ions with mass number A < 40 and energies between 15 and 70 AMeV by means of increase of beam intensity. Moreover, a beam energy resolution of 0.1% is requested by the NUMEN project at INFN-LNS. We plan to achieve high beam power by increasing the efficiency of the injection and extraction processes. The current extraction efficiency is lower than 60%. We expect to increase it to a value close to 100% by extracting the specific ion beams by stripping and no longer by electrostatic deflectors. A spiral inflector is used to bent onto the median plane the ion beams produced by the two ECR ion sources. Including the effect of a drift buncher placed in the axial injection line, the current injection efficiency is about 15%. The study of an upgraded CS central region is ongoing at INFN-LNS. First results of simulation study aimed to increase the injection efficiency are presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-Cyclotrons2019-TUP011

About •

paper received ※ 14 September 2019 paper accepted ※ 25 September 2019 issue date ※ 20 June 2020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEA02

The Developments of the RF System Related to the K-800 Superconducting Cyclotron Upgrade

262

A.C. Caruso, L. Calabretta, G. Costa, G. Gallo, A. Longhitano, D. Rifuggiato, A. Spartà, G. Torrisi, E. Zappalà
INFN/LNS, Catania, Italy

The K-800 superconducting cyclotron has been in operation at Laboratori Nazionali del Sud for almost 25 years. It has been subjected to continuous upgrades and modifications since 1994: the RF couplers have been redesigned, the new dees have been changed from aluminium to copper, as has the new central region from radial to axial injection of the beam, the hybrid configuration solid state - tube of the power amplifiers, the digital LLRF, etc. The next scheduled important upgrade of the Cyclotron mainly consists in a new extraction beam line able to support the increase of the beam current intensity. The accelerated beam will be extracted in two ways: by stripper and by electrostatic deflector and, consequently, one of the most important features of the new upgrade is the new cryostat. Further upgrades and refurbishments of the other main parts of the cyclotron, such as a new liner, the modification of the RF cavities and dees, the refurbishment of HLRF-LLRF, the insertion of the stripper extraction system, to name but a few, are in progress, too. This work focuses on the RF system upgrade.

Slides WEA02 [10.816 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-Cyclotrons2019-WEA02

About •

paper received ※ 15 September 2019 paper accepted ※ 25 September 2019 issue date ※ 20 June 2020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THB01

Review of High Power Cyclotrons and Their Applications

289

L. Calabretta, D. Rifuggiato
INFN/LNS, Catania, Italy
M. Maggiore
INFN/LNL, Legnaro (PD), Italy

An incomplete review of existing machines and of present new projects of high power cyclotrons is here presented. Both high energy and low/medium energy cyclotrons will be described. Specific requests for different fields of applications are also discussed.

Slides THB01 [11.837 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-Cyclotrons2019-THB01

About •

paper received ※ 15 September 2019 paper accepted ※ 25 September 2019 issue date ※ 20 June 2020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRB03

3D Radio Frequency Simulation of the INFN-LNS Superconducting Cyclotron

361

G. Torrisi, L. Allegra, L. Calabretta, A.C. Caruso, G. Costa, G. Gallo, A. Longhitano, L. Neri, D. Rifuggiato
INFN/LNS, Catania, Italy

An upgrade plan of the Superconducting Cyclotron operating at INFN-LNS is ongoing. In this paper, a 3D numerical model of the Cyclotron radio frequency cavity is presented. Simulations include the coaxial sliding shorts, liner vacuum chamber, coupler, trimming capacitor and the Dees structures. CST microwave studio software has been used for numerical computation. RF simulations are mandatory also in order to analyze the field in the beam region and evaluate the impact of different Dees geometry and eventual field asymmetries. Moreover, 3D COMSOL Multiphysics simulations have been carried out in order to couple the electromagnetic field solution to a custom beam-dynamics code developed in Matlab as a future plan. Time evolution of accelerated beam and electromagnetic field make also possible to verify the magnetic field synchronization. Experimental validation of the developed model will be also presented.

Slides FRB03 [19.931 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-Cyclotrons2019-FRB03

About •

paper received ※ 15 September 2019 paper accepted ※ 25 September 2019 issue date ※ 20 June 2020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)