IPAC2012 - List of Authors (Thompson, L.N.S.)

Paper	Title	Page
MOPPC013	Optics and Lattice Optimizations for the LHC Upgrade Project	151
	B. Dalena CEA/IRFU, Gif-sur-Yvette, France R. Appleby UMAN, Manchester, United Kingdom A.V. Bogomyagkov BINP SB RAS, Novosibirsk, Russia A. Chancé, J. Payet CEA/DSM/IRFU, France R. De Maria, B.J. Holzer CERN, Geneva, Switzerland A. Faus-Golfe, J. Resta-López IFIC, Valencia, Spain K.M. Hock, M. Korostelev, L.N.S. Thompson, A. Wolski Cockcroft Institute, Warrington, Cheshire, United Kingdom C. Milardi INFN/LNF, Frascati (Roma), Italy
	The luminosity upgrade of the LHC collider at CERN is based on a strong focusing scheme to reach lowest values of the beta function at the collision points. Several issues have to be addressed in this context, that are considered as mid term goals for the optimisation of the lattice and beam optics: Firstly a number of beam optics have been developed to establish a baseline for the hardware R&D, and to define the specifications for the new magnets that will be needed, in Nb3Sn and in NbTi technology. Secondly, the need for sufficient flexibility of the beam optics especially for smallest β^* values has to be investigated as well as the need for a smooth transition between the injection and the collision optics. Finally the performance of the optics based on flat and round beams has to be compared and different ways have to be studied to optimise the chromatic correction, including the study of local correction schemes. This paper presents the status of this work, which is a result of an international collaboration, and summarises the main parameters that are foreseen to reach the HL-LHC luminosity goal.

TUPPC036	Integration with the LHC of Electron Interaction Region Optics for a Ring-ring LHeC	1239
	L.N.S. Thompson Cockcroft Institute, Warrington, Cheshire, United Kingdom R. Appleby UMAN, Manchester, United Kingdom N.R. Bernard ETH, Zurich, Switzerland H. Burkhardt, B.J. Holzer CERN, Geneva, Switzerland M. Fitterer KIT, Karlsruhe, Germany M. Klein The University of Liverpool, Liverpool, United Kingdom P. Kostka DESY Zeuthen, Zeuthen, Germany
	The Large Hadron Electron Collider (LHeC) project is a proposal to study e-p and e-A interactions at the LHC. One design uses an electron synchrotron to collide a 60GeV e± beam with the 7TeV proton beam. Designing a new accelerator around the existing LHC machine poses unique challenges, particularly in the interaction region (IR). The electron beam must be quickly separated from the proton beam after the interaction point (IP) to avoid beam-beam effects, while not significantly reducing luminosity or producing large amounts of synchrotron radiation. The proton beam must pass through the electron optics, while the electron beam must avoid the proton optics. The long straight section requires bending in both planes to counteract the IP crossing angle and to displace the beam vertically from the electron machine to the proton IP. An achromatic bending scheme is used in the vertical plane to eliminate dispersion at the IP and provide an optics which is well matched to the LHeC ring lattice. The interaction region and long straight section design is presented and detailed, and the design process and principles discussed.

TUPPC038	Interaction Region Optics for the Non-Interacting LHC Proton Beam at the LHeC	1245
	L.N.S. Thompson Cockcroft Institute, Warrington, Cheshire, United Kingdom R. Appleby UMAN, Manchester, United Kingdom O.S. Brüning, B.J. Holzer CERN, Geneva, Switzerland M. Klein The University of Liverpool, Liverpool, United Kingdom P. Kostka DESY Zeuthen, Zeuthen, Germany
	The Large Hadron Electron Collider project is a proposal to study e-p and e-A interactions at the LHC. Two electron accelerator designs are being studied; a linac and a synchrotron. In the synchrotron option, a 60GeV electron beam is collided with one of the LHC proton beams to provide high luminosity TeV-scale interactions. The interaction region for this scheme is complex and introduces a series of challenges due to the integration of the two machines. One of these is the optics of the second non-interacting proton beam. The second proton beam must not interfere with the LHeC experiment, but simultaneous running of the remaining LHC experiments requires that this beam must still circulate relatively undisturbed. This paper discusses methods to solve these challenges for the electron synchrotron design.

TUPPC039	Synchrotron Radiation Studies for a Ring-Ring LHeC Interaction Region and Long Straight Section	1248
	L.N.S. Thompson Cockcroft Institute, Warrington, Cheshire, United Kingdom R. Appleby UMAN, Manchester, United Kingdom N.R. Bernard ETH, Zurich, Switzerland O.S. Brüning, B.J. Holzer CERN, Geneva, Switzerland M. Klein The University of Liverpool, Liverpool, United Kingdom P. Kostka DESY Zeuthen, Zeuthen, Germany B. Nagorny DESY, Hamburg, Germany
	The Large Hadron Electron Collider project is a proposal to study e-p and e-A interactions at the LHC. In the design for an electron synchrotron (alternative designs for a linac are also under development), a 60GeV e± beam is collided with a 7TeV LHC proton beam to produce TeV-scale collisions. Despite being much lower energy than the proton beam, the electron beam is high enough energy to produce significant amounts of synchrotron radiation (SR). This places strong constraints on beam optics and bending. In particular challenges arise with the complex geometry required by the long straight section (LSS) and interaction region (IR). This includes the coupled nature of the proton and electron optics, as SR produced by the electron beam must not be allowed to quench the superconducting proton magnets or create problems with beam-gas backgrounds. Despite this, the electron beam must be deflected significantly within the IR to produce sufficient separation from the proton beam.

Paper

Title

Page

Optics and Lattice Optimizations for the LHC Upgrade Project

151

B. Dalena
CEA/IRFU, Gif-sur-Yvette, France
R. Appleby
UMAN, Manchester, United Kingdom
A.V. Bogomyagkov
BINP SB RAS, Novosibirsk, Russia
A. Chancé, J. Payet
CEA/DSM/IRFU, France
R. De Maria, B.J. Holzer
CERN, Geneva, Switzerland
A. Faus-Golfe, J. Resta-López
IFIC, Valencia, Spain
K.M. Hock, M. Korostelev, L.N.S. Thompson, A. Wolski
Cockcroft Institute, Warrington, Cheshire, United Kingdom
C. Milardi
INFN/LNF, Frascati (Roma), Italy

The luminosity upgrade of the LHC collider at CERN is based on a strong focusing scheme to reach lowest values of the beta function at the collision points. Several issues have to be addressed in this context, that are considered as mid term goals for the optimisation of the lattice and beam optics: Firstly a number of beam optics have been developed to establish a baseline for the hardware R&D, and to define the specifications for the new magnets that will be needed, in Nb3Sn and in NbTi technology. Secondly, the need for sufficient flexibility of the beam optics especially for smallest β^* values has to be investigated as well as the need for a smooth transition between the injection and the collision optics. Finally the performance of the optics based on flat and round beams has to be compared and different ways have to be studied to optimise the chromatic correction, including the study of local correction schemes. This paper presents the status of this work, which is a result of an international collaboration, and summarises the main parameters that are foreseen to reach the HL-LHC luminosity goal.

TUPPC036

Integration with the LHC of Electron Interaction Region Optics for a Ring-ring LHeC

1239

L.N.S. Thompson
Cockcroft Institute, Warrington, Cheshire, United Kingdom
R. Appleby
UMAN, Manchester, United Kingdom
N.R. Bernard
ETH, Zurich, Switzerland
H. Burkhardt, B.J. Holzer
CERN, Geneva, Switzerland
M. Fitterer
KIT, Karlsruhe, Germany
M. Klein
The University of Liverpool, Liverpool, United Kingdom
P. Kostka
DESY Zeuthen, Zeuthen, Germany

The Large Hadron Electron Collider (LHeC) project is a proposal to study e-p and e-A interactions at the LHC. One design uses an electron synchrotron to collide a 60GeV e± beam with the 7TeV proton beam. Designing a new accelerator around the existing LHC machine poses unique challenges, particularly in the interaction region (IR). The electron beam must be quickly separated from the proton beam after the interaction point (IP) to avoid beam-beam effects, while not significantly reducing luminosity or producing large amounts of synchrotron radiation. The proton beam must pass through the electron optics, while the electron beam must avoid the proton optics. The long straight section requires bending in both planes to counteract the IP crossing angle and to displace the beam vertically from the electron machine to the proton IP. An achromatic bending scheme is used in the vertical plane to eliminate dispersion at the IP and provide an optics which is well matched to the LHeC ring lattice. The interaction region and long straight section design is presented and detailed, and the design process and principles discussed.

TUPPC038

Interaction Region Optics for the Non-Interacting LHC Proton Beam at the LHeC

1245

L.N.S. Thompson
Cockcroft Institute, Warrington, Cheshire, United Kingdom
R. Appleby
UMAN, Manchester, United Kingdom
O.S. Brüning, B.J. Holzer
CERN, Geneva, Switzerland
M. Klein
The University of Liverpool, Liverpool, United Kingdom
P. Kostka
DESY Zeuthen, Zeuthen, Germany

The Large Hadron Electron Collider project is a proposal to study e-p and e-A interactions at the LHC. Two electron accelerator designs are being studied; a linac and a synchrotron. In the synchrotron option, a 60GeV electron beam is collided with one of the LHC proton beams to provide high luminosity TeV-scale interactions. The interaction region for this scheme is complex and introduces a series of challenges due to the integration of the two machines. One of these is the optics of the second non-interacting proton beam. The second proton beam must not interfere with the LHeC experiment, but simultaneous running of the remaining LHC experiments requires that this beam must still circulate relatively undisturbed. This paper discusses methods to solve these challenges for the electron synchrotron design.

TUPPC039

Synchrotron Radiation Studies for a Ring-Ring LHeC Interaction Region and Long Straight Section

1248

L.N.S. Thompson
Cockcroft Institute, Warrington, Cheshire, United Kingdom
R. Appleby
UMAN, Manchester, United Kingdom
N.R. Bernard
ETH, Zurich, Switzerland
O.S. Brüning, B.J. Holzer
CERN, Geneva, Switzerland
M. Klein
The University of Liverpool, Liverpool, United Kingdom
P. Kostka
DESY Zeuthen, Zeuthen, Germany
B. Nagorny
DESY, Hamburg, Germany

The Large Hadron Electron Collider project is a proposal to study e-p and e-A interactions at the LHC. In the design for an electron synchrotron (alternative designs for a linac are also under development), a 60GeV e± beam is collided with a 7TeV LHC proton beam to produce TeV-scale collisions. Despite being much lower energy than the proton beam, the electron beam is high enough energy to produce significant amounts of synchrotron radiation (SR). This places strong constraints on beam optics and bending. In particular challenges arise with the complex geometry required by the long straight section (LSS) and interaction region (IR). This includes the coupled nature of the proton and electron optics, as SR produced by the electron beam must not be allowed to quench the superconducting proton magnets or create problems with beam-gas backgrounds. Despite this, the electron beam must be deflected significantly within the IR to produce sufficient separation from the proton beam.