IPAC2012 - List of Authors (Huang, M.Y.)

Paper	Title	Page
MOPPD075	Optimization of the Collimation System for the CSNS/RCS	538
	N. Wang, M.Y. Huang, S. Wang, S.Y. Xu IHEP, Beijing, People's Republic of China
	Beam loss induced activation of the accelerator components is one of the primary concerns in designing a high intensity machine. The uncontrolled beam loss is required to be less than 1 W/m for hands-on maintenance of the machine. A two stage collimation system is designed in the Rapid Cycling Synchrotron (RCS) of the China Spallation Neutron Source (CSNS) to localize the beam losses in a restricted area. The parameters of the collimator are optimized in order to obtain high collimation efficiency. The final design of the collimation system is presented. The reliability of the collimation system is estimated for different working points and with closed orbit errors.

THEPPB005	Study on the Injection Optimization and Transverse Coupling for CSNS/RCS	3240
	M.Y. Huang, J. Qiu, S. Wang, S.Y. Xu IHEP, Beijing, People's Republic of China
	The injection system of the China Spallation Neutron Source uses H⁻ stripping and phase space painting method to fill large ring acceptance with the linac beam of small emittance. The emittance evolution, beam losses, and collimation efficiency during the injection procedures for different injection parameters, such as the injection emittances, starting injection time, twiss parameters and momentum spread, were studied, and then the optimized injection parameters was obtained. In addition, the phase space painting scheme which also affect the emittance evolution and beam losses were simulated and the optimization range of phase space painting were obtained. There will be wobble in the power supply of the injection bumps, and the wobble effects were presented. In order to study the transverse coupling, the injection procedures for different betatron tunes and momentum spreads were studied.

Paper

Title

Page

Optimization of the Collimation System for the CSNS/RCS

538

N. Wang, M.Y. Huang, S. Wang, S.Y. Xu
IHEP, Beijing, People's Republic of China

Beam loss induced activation of the accelerator components is one of the primary concerns in designing a high intensity machine. The uncontrolled beam loss is required to be less than 1 W/m for hands-on maintenance of the machine. A two stage collimation system is designed in the Rapid Cycling Synchrotron (RCS) of the China Spallation Neutron Source (CSNS) to localize the beam losses in a restricted area. The parameters of the collimator are optimized in order to obtain high collimation efficiency. The final design of the collimation system is presented. The reliability of the collimation system is estimated for different working points and with closed orbit errors.

THEPPB005

Study on the Injection Optimization and Transverse Coupling for CSNS/RCS

3240

M.Y. Huang, J. Qiu, S. Wang, S.Y. Xu
IHEP, Beijing, People's Republic of China

The injection system of the China Spallation Neutron Source uses H⁻ stripping and phase space painting method to fill large ring acceptance with the linac beam of small emittance. The emittance evolution, beam losses, and collimation efficiency during the injection procedures for different injection parameters, such as the injection emittances, starting injection time, twiss parameters and momentum spread, were studied, and then the optimized injection parameters was obtained. In addition, the phase space painting scheme which also affect the emittance evolution and beam losses were simulated and the optimization range of phase space painting were obtained. There will be wobble in the power supply of the injection bumps, and the wobble effects were presented. In order to study the transverse coupling, the injection procedures for different betatron tunes and momentum spreads were studied.